Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

P-51D grande bella bambola 1.600 millimetri EPO w / ritrae elettrici, flaps, Luci (PNF)

Generating Links

P-51D grande bella bambola 1.600 millimetri EPO w / ritrae elettrici, flaps, Luci (PNF)

Prezzo:

Now save risparmia 0,00 € 0,00 €

169,75 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
P-51D-BD-PNP
Spedizione gratuita? Clicca qui per saperne di più!
Questa è una grande Warbird schiuma! Essere Plug N Fly si tratta di un modello di costruzione veloce ricco di funzioni sufficienti e dettaglio scala per rendere questo un uccello sarete orgogliosi di possedere.

Realizzato in schiuma di EPO, questo modello è pratico, nonostante le sue dimensioni, un'ala rimovibile un pezzo rende per un facile trasporto, anche la coda può essere un-avvitato se lo si desidera. Si ritrae pre-montati servo di ed elettrici sono tutti pre-etichettati rendendo campo montaggio rapido e semplice. Esso utilizza il tipo di 4S pacchetti che stanno diventando molto comuni ora in foamie grandi di, le probabilità sono, si dispone già di un paio in flightbox. Il motore di pre-misura ha un sacco di potenza per quei acrobazia Warbird scala o semplicemente straffing tuo campo di volo!

dettaglio scala è semplicemente stupenda, così come lo sono gli adesivi pre-applicato, caratteristiche includono preinstallato elettrico ritrae / ruotino di coda, c'è la stessa scala a 4 puntelli a lame & filatore, luci di navigazione, presa del radiatore regolabile, serbatoi sganciabili, mozziconi di scarico stampati e pistole . I lembi mantenere la velocità di atterraggio a destra verso il basso, questo modello non ha brutte punta Warbird tendenza allo stallo, galleggia proprio dentro come un allenatore. Se avete mai immaginato di possedere un Falco da Guerra, ma sono stati messi fuori da tutte le storie che avete sentito parlare di loro di essere "difficile" per volare, questo è il modello per te!

Specifiche:
Apertura alare: 1.600 millimetri
Lunghezza: 1.400 millimetri
Peso di volo: 2800g
Motore: 45-58 Brushless
ESC: 80A w / BEC
Prop: 16x6 quattro palette
Servo: 9g x 4, 17g x 2
Ritrae: Elettrico Tipo Servoless
6 Channel (Thottle, alettoni, elevatore, direzionale, ritrarre, flaps)

include:
tutto Hardware
Libretto di istruzioni
Colla

Richiede:
La tua 6 canali TX / RX
3200mAh ~ 4000mAh 4s Lipoly Batteria
* Si prega di notare, a causa delle dimensioni di questo modello, che verrà spedito doppio inscatolato per arrivare in buona conition.
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Crooky | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 19, 2014

I cannot believe the abysmal quality if Hibbyking parts and the fact people continue to buy this crap.
My son and I bought a P51 each, neither motors worked and finally when we got a working motor BOTH ESC's ceased working.
Additionally my sons 1600 Edge had exactly the same problem.
When you then have to replace the retracts and servos or risk an air failure, you are better off spending the $$$ on quality planes and equipment.

Crooky | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 06, 2014

Because I'm waiting, waiting, waiting for Hobbyking to get their act together and send me a working motor I am nevertheless very busy.
The tail wheel pull cable is poorly thought thru so I've replaced it with push/pull rods.
Both flap servos have literally burst into flames just sitting idle so they are replaced, obviously.
Retracts seem to have a mind of their own and I'm really tempted to just replace them even before it flies.
On another note, balance was so far out I needed about 6oz of lead at the firewall. This I find amazing that a model could be so off balance.
Summary, a great plane once you spend another few hundred bucks making it flyable.
Another piece of rubbish.

Crooky | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 03, 2014

After two other planes from HobbyKing, both with missing or defective parts I was apprehensive, and HK did not disappoint.
My motor was used, second hand. The prop mount screws were wrong gauge to the holes in the motor and the holes all had stripped threads.
The motor mount is off centre so I need to mount an adaptor to align it centrally.
There was no cover tape for the servos, and as another person noted, one of the flap servos was red and burned out immediately, (I don't mean after a few minutes, IMMEDIATELY) so I've replaced that one.
Not having run the motor yet, I can't comment on the prop mount or balance, let alone flight until,HobbyKing take their usual 2 weeks to even get a warranty claim moving. I'm not looking at getting a replacement from then for at least a month so it's off to buy a replacement in the meantime.
Yes I'm pissed off.

John | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 14, 2013

Well after a fare bit of fiddling I got to do a maiden flight with BBD.
My local club, has a field, sound cool but it's a field not much bigger than a football pitch with large hedges down both side so park flyer really,we keep well mown so short field grass , anyway weather was nice and the wind light.
Taking off (no flaps ) at less than half throttle, and we were up and away ,nice and smooth and scale like,just a few licks of trim and she's flying "hands free" no problem ,she flies really nice, very scale,not over powered on 4s 4000mah but plenty there for all the normal, loop rolls,stall turns,hammer heads etc, all with graceful ease.
She does needs a fare hand on the rudder to keep her tracking nice,or the tail drops to the inside do the turn,
This bird does have great presence and really looks the part in the sunset evening sky and sounds sweet with the 4 blade prop .There's no nasties, no tippy stalls, she just float around really sweet.
landing is trainer stuff....line her up keep the prop spinning and just float in (no flaps) slow her down and touch down nice and gentle ... ah!!!! ..right hand LG gave way as she stopped. So Playtime over.
So,yes the LG is pretty poor ,after a stripping down the a-fending retract , its would seems that one of the two very tiny micro switches ( 2mm x 3mm) that regulate the travel had popped off it mounting.The problem is , it

ratherbeflyin | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 11, 2013

purchased this plane recentlt.very happy with the fit and finish,however my motor is defective ,when running at slow speeds the motor magnets are rubbing because the can is out of round.....with keeping the stock 4 blade prop on and keeping the same esc,WHAT WOULD A GOOD QUALITY MOTOR REPLACEMENT BE RUNNING A 4S 4000MAH BATTERY?OF COURSE I WOULD WANT TO FIT IT IN WITH NO ALTERING PLANE OR MOUNT?HAS ANYONE DONE THIS?APPARENTLY THIS IS A 400 KV MOTOR,TO GET A LITTLE BETTER PERFORMANCE SHOULD I BE GETTING A 450 KV?ANYONE .......????

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 10, 2013

this is one sweet mustang,for the money, i havent had any problems with the retracts,however,i re-did the plywood mount with a thicker wider piece of ply,re-screwed back in,and gorrilla glued...noe good,package came perfectly packed,your an ace hobby king!

homeboy46 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 12, 2013

I love this plane but ther are some parts that you will need to fix, like the horns for the flaps ant Togo and the vertical stabiliser need better instructions too, but still a good buy,

DNS-NL | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 28, 2012

Beautifull EPO plane !

Looks like any other balsa plane, good quality EPO.

The only point of critisism is the weak fastening of the landing .
It is attached to the EPO. There is on youtube a good tutorial on how to strengten the gear, do this and you have lot's of fun with this warbird !


http://www.youtube.com/watch?v=xS7Im3RESEw&feature=youtube_gdata_player

Eloute | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 13, 2012

Its a nice plane but there are issues with the retracts. The retracts only successfully cycled once the one burnt out. The only retract still working is the tail wheel now. I havent flown the plane yet as it didnt come with any bolts to hold the wing down. Hobbyking was no help so I made my own hold down bolts from M4 threadded rod.

papamarnix | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 01, 2012

Have received mine a while ago and i`m very pleased with it. Just 2 things that need a little attention. for 1 the landing gear is weak an flumsy as you can read in all the other reviews. second, the plating on witch the engine is mounted is thin and weak. you might also test the servo`s as they are not the best quality. I Replaced all these weak spots and now its a real stunning plane. flies easy and predictable jet quite fast. easy to take off and land. And even if you replace all servo`s and gear still it`s a bargain.

  1. 1
  2. 2
  3. 3
File dei clienti
No File Name Download [26]
No File Name Download [2418]
No File Name Download [2418]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!