Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global

Prop & Back-Plate maschere trapano per DA100 e 150 \ DLE111 \ 3W50-170 \ TMM53-106

Prop & Back-Plate maschere trapano per DA100 e 150 \ DLE111 \ 3W50-170 \ ...

QTY:

Now save risparmia 0,00 € 0,00 €

12,26 €
Stock:
Peso:
253 g
SKU:
DJ-111-100

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrizione
prodotto
Prop & Back-Plate maschere trapano per DA100 e 150 \ DLE111 \ 3W50-170 \ TMM53-106

Assicura foratura dritto di lastre elica e posteriori filatrice.
Zigrinato OD che rende più facile per il fissaggio rimovibile.
Si prega di scegliere la taglia giusta di trapano prima di fissare la dima alla vostra elica.

trapano 5 millimetri è usato per elica perforazione del seguente DA100 e 150 \ DLE111 \ 3W50-170 \ TMM53-106

* Nota *: E 'meglio praticare l'elica dalla faccia posteriore. Indietro fuori forare più volte, come si va a cancellare il legno dal bit al fine di garantire una superficie liscia, buco accurata. Non forzare il bit attraverso l'elica. Posizionare il bullone nel primo foro dopo la foratura di aiutare con allineamento quando foratura altri fori. Si prega di orientare sempre l'elica con estremità delle pale a 9 e 03:00 od orizzontale a terra con la corsa di compressione prima di trapano. In caso di atterraggi bastone morti questo può salvare il puntello e la vostra struttura del velivolo.
Product
Specifications

Ulteriori informazioni

  • SKU:
    DJ-111-100
  • Brand:
    N/A
  • Peso (g)
    253.00
  • Lunghezza
    105.00
  • Larghezza:
    27.00
  • Altezza:
    100.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Zapfen 10mm, Bohrer und Lcher 5mm.

For Centerhole 10mm, drill 5mm.

Perfect little tool to drill propellers like DLE 120 (and the listed in the header)
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I cant see how you can do without this if you run the bigger petrol/gas motors
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Much better to use in your prop.For Da 100&150 / DLE111
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
ideal pour per les hlice en bois ou carbonne DLA112
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
this is a brilliant tool, cheap and very accurate,,used it today for the first time,ya just cant really go wrong with this as your guide,, have used on CF props,, works fine,, get it soon,, for your next prop you wont be sorry
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Thanks HK for this price and for this product. You must be apply thin oil on it when you not use
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great product, nice an heavy.

It can also be used for MT57 engines. However, the holes in the jig are 5mm and MT uses 4mm, but center of the holes are aligned. I recommend that you drill 5mm holes in the prop and cut pieces of a brass tube (5mm ext/4mm int), and put in the holes. You can also put the tubes in the jig and drill with a 4mm bit, but you will probably destroy the tubes. Use a wooden base for the prop to rest on when drilling.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Great product, nice an heavy.

It can also be used for MT57 engines. However, the holes in the jig is 5mm and MT uses 4mm, but center of the holes are aligned. I recommend that you drill 5mm holes in the prop and cut pieces of a brass tube (5mm ext/4mm int), and put in the holes. You can also put the tubes in the jig and drill with a 4mm bit, but you will probably destroy the tubes.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Excelente ferramenta para furao de helice para quem tem motores a gasolina de grande cilindrada, bom acabamento.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
This has worked great for me! I'd recommend it. Good stuff.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.