New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Prop Saver w / Banda 3 millimetri

Prop Saver w / Banda 3 millimetri

Discontinued Product

Please continue searching for a similar product.
SKU:
OR019-005013_
WANT FREE SHIPPING? Click here to find out more!

Lega Prop Saver w / Banda
Peso: 2.5g

Seleziona qui di seguito per il vostro formato;
Disponibile: 3mm

  • SKU OR019-005013_
  • Brand -
  • Capacità ( mAh ) -
  • Peso 3.0000
  • Lunghezza 0.00
  • Packaging Width 0.00
  • Altezza 0.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Perfect choice for the money to safe propeller

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Perfect choice for the money to safe propeller

Screw head is to small. Very hard to tightened on shaft

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Screw head is to small. Very hard to tightened on shaft

petit, lger, pas cher, trs pratique, je recommande!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

petit, lger, pas cher, trs pratique, je recommande!!

Great product. Way better than breaking your prop.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great product. Way better than breaking your prop.

I use to make my own prop savers. But when you add up the cost of the aluminum, the screws, the o-rings, and the time it takes to make them...it makes these a VERY good buy!



I usually add some of these to every order that still has a few grams left in my shipping bracket. They only weigh 3g!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use to make my own prop savers. But when you add up the cost of the aluminum, the screws, the o-rings, and the time it takes to make them...it makes these a VERY good buy!



I usually add some of these to every order that still has a few grams left in my shipping bracket. They only weigh 3g!

Light, cheap propsaver. With some mods. fit ok to GWS DD props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Light, cheap propsaver. With some mods. fit ok to GWS DD props.

. / - . )

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

. / - . )

I have had two of those. Also problems with the screws. The head get stripped. The screws will get loose on moisture conditions and if water will get inside the prop saver.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have had two of those. Also problems with the screws. The head get stripped. The screws will get loose on moisture conditions and if water will get inside the prop saver.

Also... file your prop hub edges! I used an 8x3 -E APC prop with this and the sharp edges on the prop hub cut right through the black ring after several days! However, you can use cheap rubber bands looped back & forth around the screw heads, hey... it WORKS!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Also... file your prop hub edges! I used an 8x3 -E APC prop with this and the sharp edges on the prop hub cut right through the black ring after several days! However, you can use cheap rubber bands looped back & forth around the screw heads, hey... it WORKS!

The first 2 reviews are totally accurate! Plus is that it saved an 8x3 E APC prop about 8x now! Negative is that the screw stripped the threaded hole in the hub. The fix would be to run a 10-40 tap in there with cutting oil and replace screw.



As stated above: Trim your motor shaft, mount this right against the bell housing and file a flat in the shaft for the setscrews to settle into.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The first 2 reviews are totally accurate! Plus is that it saved an 8x3 E APC prop about 8x now! Negative is that the screw stripped the threaded hole in the hub. The fix would be to run a 10-40 tap in there with cutting oil and replace screw.



As stated above: Trim your motor shaft, mount this right against the bell housing and file a flat in the shaft for the setscrews to settle into.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!