Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Px4Pilot 32Bit di controllo autopilota Flight

Generating Links

Px4Pilot 32Bit di controllo autopilota Flight

Prezzo:

Now save risparmia 0,00 € 0,00 €

61,69 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
571000093-0
Spedizione gratuita? Clicca qui per saperne di più!

Il PX4Pilot è uno dei sistemi autopilota più avanzati disponibili oggi sul mercato. È un sistema di livello autopilota professionale utilizzati da ricercatori e altri dove autonomo e / o fuori linea di operazioni vista è richiesto.

Disponibile con il supporto per quasi qualsiasi tipo di veicolo, aereo o nave, il progetto open-hardware PX4 è supportato da una serie di comunità di sviluppo rendendo questa una delle piattaforme più flessibili e affidabili per il controllo a distanza del veicolo / autonomo nel mondo.

Caratteristiche principali
• 168 MHz / 252 MIPS Cortex-M4F
• Uscite 14 PWM / Servo (8 con fail-safe e comando manuale, 6 ausiliario, ad alta potenza compatibile)
• opzioni di connettività abbondante per periferiche aggiuntive (UART, I2C, CAN)
• sistema di backup integrato per il recupero in volo e comando manuale con processore dedicato e alimentazione stand-alone (uso ad ala fissa)
• Sistema di backup integra miscelazione, fornendo pilota costante e modalità di miscelazione di comando manuale (uso ala fissa)
• ingressi di alimentazione ridondanti e failover automatico (sistema di backup)
• interruttore di sicurezza esterno
• LED multicolore principale indicatore visivo
• ad alta potenza, indicatore piezo audio multi-tono
• per schede microSD per la registrazione ad alta velocità per periodi di tempo prolungati

Specifiche:
Processore

- STM32F427 Rev nucleo 32bit 3.0 Cortex M4 con FPU
- 168 MHz
- 256 KB di RAM
- 2 MB Flash
- 32 bit STM32F103 fail-safe coprocessore

sensori
- ST Micro L3GD20H 16 bit giroscopio
- ST Micro LSM303D 14 bit accelerometro / magnetometro
- Invensense MPU 6000 a 3 assi accelerometro / giroscopio
- MEAS barometro MS5611

interfacce
5x UART (porte seriali), uno ad alta potenza in grado, 2x con controllo di flusso HW
2x CAN (uno con transceiver 3.3V interna, uno sul connettore di espansione)
ingresso compatibile Spektrum DSM / DSM2 / DSM-X® satellitare
Futaba S.BUS® di ingresso e di uscita compatibile
Ingresso segnale di somma PPM
RSSI (PWM o tensione) di ingresso
I2C
SPI
3,3 e 6,6 V ingressi ADC
porta micro USB interna ed estensione porta USB esterna micro

Incluso:
PX4Pilot Autopilota
Cicalino
tasto di interruttore di sicurezza
SD card e l'adattatore
schiuma di montaggio
Cavo servo 3 fili

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Ben | Acquirente verificato

  • Overall
  • Quality
  • Value

Perfect!

Sep 02, 2018

This thing worked perfectly, used autotune with Arducopter. It was bang on in poshold with only a gps. Can't go wrong with this one!

Doug | Acquirente verificato

  • Overall
  • Quality
  • Value

PX4Pilot is an excellent product.

Jul 29, 2018

I have 3 of these now and no problems with any of them. They have done over 100 fully autonomous missions flawlessly. Very easy to program in QGround Control or Mission Planner if you desire. Forget those F3 and F4 boards if you want to be serious. 3 of my buddies are also very impressed and have bought several each as well. No problems encountered with any of them. Make sure you buy add-ons specifically designed for these PX4Pilots (Pixhawks) and you won't have any problems.

Aaron | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 21, 2016

Had a few issues with bad accelerometer error with this board during its pre-flight checks but id reboot it and it would be fine. Been getting IMU Mismatch = FAIL - Check vibration or accelerometer calibration. (Mismatch: 5.63, WARN: 0.75, FAIL: 1.50) error while flying and quad would then pitch violently forward almost a second later. Check for motor, ESC, and vibration issues and all checkout fine. Put in my trusty APM 2.7 and flies great. Put this FC back on and issue happened again this time was not able to save the quad. I strongly suspect and intermittently faulty accelerometer.
No comments. Reply..

Aaron | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 21, 2016

Had a few issues with bad accelerometer error with this board during its pre-flight checks but id reboot it and it would be fine. Been getting IMU Mismatch = FAIL - Check vibration or accelerometer calibration. (Mismatch: 5.63, WARN: 0.75, FAIL: 1.50) error while flying and quad would then pitch violently forward almost a second later. Check for motor, ESC, and vibration issues and all checkout fine. Put in my trusty APM 2.7 and flies great. Put this FC back on and issue happened again this time was not able to save the quad. I strongly suspect and intermittently faulty accelerometer.

drotschopf | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 07, 2016

Top Product, best flightcontroller for that price

heiko | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 14, 2016

Seems to work, tomorrow I will start installing it in my Zeta Sky Observer.

There had been some problems with updating to ArduPlane with my Ubuntu 14.0 LTS Machine. The FW was erased but not uploaded later. I tried alot but nothing worked. APMplanner2 was not able to bring the FW up.

Than I used a Windows 7 machine with Mission Planner the FW could be updated, so lets see why this happend. The device is recognized as Pixhawk, PX4 something.

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!