Become a Dealer Blog
Registrati

Prezzo totale

0,00 US$

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy Quad 4x6S Caricatore ai Polimeri di Litio 400W solo CC

Generating Links

Turnigy Quad 4x6S Caricatore ai Polimeri di Litio 400W solo CC

Prezzo:

Now save risparmia 9,70 US$ 9,70 US$

Special Price 87,29 US$ 87,29 US$

You save risparmia 9,70 US$ 9,70 US$

Was  96,99 US$

Quantità:
Spedito da:
  • USA
  • Global
Già acquistato
Stato:
disponibile
SKU:
9070000060-0
Spedizione gratuita? Clicca qui per saperne di più!

Accessori

Il Turnigy Quad 4x6S può caricare quattro pacchi batteria contemporaneamente! Le confezioni possono essere di vari tipi, come Lilo, LiPo, LiFe, LIHV, NiMH, NiCd e Pb. Un caricabatterie dal design di qualità con un bilanciamento accurato e un sistema di menu familiare e intuitivo.


Il Turnigy Quad 4x6 è dotato di 4 microprocessori ad alta precisione per caricare ciascuna batteria singolarmente. Il suo efficiente sistema di raffreddamento garantisce un funzionamento sicuro durante tutto il ciclo di carica. Tutte le porte funzionano indipendentemente l'una dall'altra per offrirti un'enorme versatilità. C'è la possibilità di bilanciare la carica di un pacco LiPo su Port-1 mentre si carica in serie una batteria LiFePo4 o NiMH su Port-2 o molte più combinazioni.


Non c'è motivo di acquistare quattro addebiti individuali. Il Turnigy Quad ti farà risparmiare tempo caricando quattro batterie alla volta.


Specifiche:
Intervallo di tensione di funzionamento: 10.0~18.0V CC
Cambia Potenza: Max 100 Watt per ogni presa (10A 100W x 4)
Potenza di scarica: Max 5 Watt per ogni presa (2A 5W x 4)
Intervallo di corrente di carica: 0.1 ~ 10.0A per ciascuna presa
Alimentazione: 12V CC (batteria per auto) / alimentazione di rete CA (> 200 Watt)
Conteggio delle cellule: 1-15 Ni-xx / 1-6 Li-xx / 1-10 celle al piombo (2~20V)
Assorbimento di corrente per bilanciamento li-xx: 300mA
Ventola di scarico del dissipatore di calore ad alta velocità.


Incluso:
1 x caricatore Turnigy
1 x adattatore JST XH
1 x adattatore TP/FP
1 x spina a banana con maschio XT60
1 x spina a banana con maschio XT90
1 x spina a banana con maschio JST
1 x spina a banana con clip a coccodrillo
1 x spina a banana con 18 AWG senza connettore
1 paio di clip a coccodrillo


Nota: alimentatore non incluso. Tutti gli accessori mostrati nell'immagine sono inclusi.

  • Turnigy Quad 4x6S Lithium Polymer Charger - HobbyKing Daily
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

. | Acquirente verificato

  • Overall
  • Quality
  • Value

Excellent product

Jun 24, 2024

An excellent product, easy to navigate & a workhorse for multiple charging.

Ivanov C. | Acquirente verificato

  • Overall
  • Quality
  • Value

A good charger with ups and downs

Jan 24, 2023

I bought the charger together with the parallel charging boards and after using the parallel boards I realized that I didn't need such a charger. Anyway, it is a good charger at the hobbyist's house and at the airfield.
Some observations about this charger:
1. You have to buy separately 3 JST XH adapters plus banana plugs to be able to connect 4 lipos on each port. The kit contains only 1 jstxh adapter
2. It has a cooling fan that works all the time and makes noise, so it is not good to use the charger in the bedroom at night if you want to sleep. After the warranty period has passed, I will install a switch to stop the fan when the charger is not full loaded
3. I used a 240w main psu unit and first the power source must be turned on and then the charger must be connected so that the low voltage error does not appear
4. The discharge rate is quite low, 5W on each port. Discharging a 2200mA lipo from the fully charged level to the storage level will take approximately 3 hours. ((will discharge this battery with a maximum rate of 0.3A even if you select a higher rate this will be the maximum for this battery)). It's ok if you're not in a hurry.
5. There is no manual charging option for nicd and nimh batteries, even though the manual says that there is a manual option, also at the end of the process, you can NOT see charged or discharged electric capacities of the battery at each cyclic
process.
HK mentioned after a discussion that these options were on an older version of the charger and that on the new version they were removed this options for security reasons. Another buyer specifies on the forum that it is not possible to return to the old software version to benefit from this options. Anyway, you can live without these options
6. IR test meter. I measured a lipo battery on each port and each time I got different results with big differences.
I don't know if it's ok like that
7. The buttons are a bit hard and cramped and located a little lower than the case and if you have thicker fingers they are a bit uncomfortable to use
8.The software has some glitchs. When you will use you will notice certain inconsistencies, like pressing enter and you notice decreasing the amperage and others which are difficult to explain. But they can be overlooked
9. I charged some older lipo batteries and the charging process had to be stopped manually, because the charger did not stop automatically. Although the batteries did not absorb current, the charging process did not end automatically.
This did not happen with the new batteries. Finally, the old ones returned after a few charge and discharge cycles

Charger | Acquirente verificato

  • Overall
  • Quality
  • Value

Turnigy charger

Nov 24, 2022

Great charger easy to use. One slight down fall is the charging ports do not line up with the displays. After some use this is a non issue.

serge | Acquirente verificato

  • Overall
  • Quality
  • Value

trés bien

Nov 11, 2022

parfait

Untanux | Acquirente verificato

  • Overall
  • Quality
  • Value

Good budget 4in1 charger

Jul 08, 2022

Good simple charger, weak-point is cooling fan, its noisy and doesn't last very long.

Wayne | Acquirente verificato

  • Overall
  • Quality
  • Value

Good product and great price

May 27, 2022

Very good product and a great price

Juanjo | Acquirente verificato

  • Overall
  • Quality
  • Value

Cargador

Apr 06, 2022

Es el mejor que tengo, carga rápido

Perce | Acquirente verificato

  • Overall
  • Quality
  • Value

I though it was 240v not having to connect to a battery

Mar 25, 2022

I have waisted my pension money

DP | Acquirente verificato

  • Overall
  • Quality
  • Value

Turnigy charger

Feb 14, 2022

Excellent product, does the job but arrived in inadequate, damaged packaging.

Bruce | Acquirente verificato

  • Overall
  • Quality
  • Value

Garbage

Jan 11, 2022

This charger is garbage. I used a 10amp 12V PSU and get "Input Voltage Error" on every port, just trying to balance charge a 3S 2200mah battery that is mostly full. Tried another PSU with the same result. Returning it. Took Hobby King 22 days to give this to the courier and another 43 days to ship this from Australia to NZ !!! Don't buy from this crowd unless you are in no hurry to receive the product.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 8
File dei clienti
Turnigy Quad 4x6S Charger 400W Manual Download [6]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!