Quanum Aquaholic Brushless a V profondo barca di corsa 740 millimetri (ARR)

• Overall
• Quality
• Value

Customer Rated

Sep 03, 2014

Great boat for the price all you have to do is buy a controller/receiver and a couple of 2200mah 3s lipo batteries and your set. Takes 10mins to set up, the abs plastic is rigid enough, it has a good finish with the decals under the clear coat. Goes 25-30mph as said,which is fast enough for all ages. Overall I like the boat and would recommend it

• Overall
• Quality
• Value

Customer Rated

May 10, 2014

Awesome RC boat, for the money especially. It's fast and turns on a dime but it has a few flaws. The stock water intake is too long and ends over the prop nut where it gets no water flow. Take it out and shorten it a quarter inch to where it is half way up the prob blade and you'll get much better water flow, but be careful when tightening the set screw or the plastic will snap off. Before you run it for the first time, take out the drive shaft and coat it in sort of oil (motor oil works well) and do that after every 5-10 batteries (one of the set screws on the drive shaft stripped, not my fault but bad quality). I run a Turnigy 2200 25-35C battery and I recommend getting a 45 C because this battery is pretty hot after a full run. It definitely goes over 30mph and I get 5-8 minutes of run time. Great boat and I would definitely buy another.

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 04, 2014

The only maintenance is required is to grease the flex shaft with marine grease and make sure you also put grease on the bearing . When i do this i wipe off old grease off the flex shaft before putting new grease on . do this after 4 or 5 runs .and wipe out any water on the inside the hull after your done . drain any water out between every battery packs . Tape the the top deck with any kind or tape to keep water out of hull the best...

• Overall
• Quality
• Value

Customer Rated

Mar 24, 2014

Great little boat for the money.
It handles extremly well, and te hardware is good.
The water cooling system works perfect, and the motor and ESC are cool after a run.
I havea also tried a 4s battery, and it takes it no problem at all.
The hatch seals the inside of the hull completly, and does not need sticky tape like other models out there. Speed is sufficiant for this size of model not uncontrolable fast, :-)

• Overall
• Quality
• Value

Customer Rated

Mar 09, 2014

It is my first electic boat. It easy to handle. With 2200mAh 3s Lipo 4-5 min runtime.

Good things:
- the price
- very good balanced boat => easy to handle
- nice finished
- the inside component quality is good for this price
- light weight
- for me good speed

Bad things:
- bad mounting quality (in my boat the glue between the main tube and the body was not good mounted, and lot of water laked into the boat. I had te remove the original glue, and use silicon glue)
- plastic prop (and no info about the prop upgade possibility)
- the runtime could be longer
- it is not a precise boat
- not everyting on the boat is well tought out

I would by it again :)

Peter

• Overall
• Quality
• Value

Customer Rated

Jan 29, 2014

It is a great boat. Easy to assemble. Using it with 3s has good performance. I added carbon stabilizers and really has an excellent virage!
For all the fun you want, this boat is the best!

• Overall
• Quality
• Value

Customer Rated

Jan 17, 2014

Great little boat, plenty fast for me on the 10 dollar 2200 3 cell zippy lipo. The cooling system needed a little work to be better, I shortened the hose routing and moved the outlet closer to the motor and it works like a champ on the stock pickup. All and all it's great, specially for the price.

• Overall
• Quality
• Value

Customer Rated

Dec 10, 2013

Hi guys
Brushless motor are BL2815 Outrunner brushless motor. Im wonder what is the motor Kv that comes with this boat.

• Overall
• Quality
• Value

Customer Rated

Oct 10, 2013

ottima imbarcazione e ottimo il rapporto qualit prezzo, mi si spaccata la carena nello specchio di poppa a causa di un urto riparata con resina epossidica e tessuto di fibra di vetro

• Overall
• Quality
• Value

Customer Rated

Oct 10, 2013

Ottimo scafo veloce e abbastanza stabile, ho avuto un incidente spaccandolo e ho risolto con resina epossidica bicomponente e tessuto di fibra di vetro ed tornato come nuovo. consigliato