Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global

Quanum Q-3D Brushless 3-Axis Camera giunto cardanico (adatto per Nova, Scout X4, Phantom, QR X350 etc.)

Quanum Q-3D Brushless 3-Axis Camera giunto cardanico (adatto per Nova, Scout ...

QTY:

Now save risparmia 0,00 € 0,00 €

125,40 €
Stock:
Peso:
400 g
SKU:
9198000389-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrizione
prodotto

La nuova Quanum Q-3D è un giunto cardanico ad alte prestazioni, 3-Axis fotocamera brushless che è stato progettato per l'utilizzo con le GoPro Hero 3 e Quanum FPV + telecamere sui modelli multi-rotore 350 ~ 500 dimensioni (come la Quanum Nova, Scout X400 , Tali H500, QR X350 PRO e DJI Phantom).

Quando si tratta di una grande piattaforma video aeree, alcune cose sono fondamentali; disegno, dimensioni, peso e prestazioni. Il Q-3D è un disegno che è stato ottimizzato fin dall'inizio per una corretta integrazione, risparmiando sui dimensioni e il peso e il controller di pre-accordato esegue proprio come ci si aspetterebbe da Quanum.

Il Q-3D è uno dei più piccoli e leggeri sospensione cardanica brushless a 3 assi sul mercato. A soli 110 millimetri di altezza, si può eliminare la maggior parte dei pattini di atterraggio multi-rotore e pesa solo 185g, ideale per 350 ~ 500 dimensioni multi-rotori. Sia beccheggio e rollio possono essere regolati al volo da un canale R / C e ha una gamma enorme tensione di funzionamento di fino a 28 volt.

Il Q-3D è pre-regolato dalla fabbrica, che non richiede installazione, basta fissarlo alla parte inferiore della Quanum Nova, Scout X4, QR X350 PRO o DJI Phantom, installare la GoPro Hero 3 / Quanum FPV + macchina fotografica e sei pronto per riprendere video aerea professionale stabilizzato!

Caratteristiche:
• struttura in alluminio leggero ancora duable
• Dimensioni compatte
• Adattabile alla maggior parte dei modelli multi-rotore 350 ~ 500 formato (misura diretta per la Nova, Scout X4, TALI H500, QR X350 PRO e DJI Phantom)
• Ingressi Pitch e comando di rollio
• Supporto per la GoPro Hero 3 uscita video AUX
• Supporto enorme tensione di ingresso (7,4 ~ 28V)
• Tensione di alimentazione protezione d'inversione di collegamento e di compensazione della tensione
• protezione contro i cortocircuiti lato azionamento del motore
• angolo di passo iniziale
• regolazione dei parametri di sensibilità

Specifiche:
Tensione di funzionamento: DC 7.4V ~ 28V (consigliata 12V, batteria Li-Po 3S)
Corrente di funzionamento: 500mA ~ 600mA (dipende dalla tensione fornita e la potenza del motore)
Temperatura di esercizio: -15 ° C ~ 65 ° C
Sensore: 3 assi MEMS giroscopio a 3 assi e accelerometro MEMS
Precisione di controllo: 0.02 °
Gamma di controllo Angolo: -135 ° ~ 90 ° (inclinazione); -45 ° ~ 45 ° (rotolo)
Fotocamera applicabile: iLook / iLook + / serie GoPro / Tunigy ActionCam
Peso: 188g (senza fotocamera)
Dimensione: 114.3x97.5x106.6mm
Dimensioni scatola: 150x127x98mm

Product
Specifications

Ulteriori informazioni

  • SKU:
    9198000389-0
  • Brand:
    Quanum
  • Peso (g)
    400.00
  • Lunghezza
    150.00
  • Larghezza:
    100.00
  • Altezza:
    125.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
I want to be as honest as possible with this review. Overall, this gimbal was poorly designed from the start and has several issues.

It's designed to work with GoPro's and I have a Hero3. However, due to the placement of the camera, attaching a USB AV cable is difficult to say the least.

You cannot not control yaw via an RC channel, but I was aware of this when I bought it. It's a minor inconvenience for me, but a bigger problem is how if you want to control pitch via an RC channel, you must also use another channel for roll stabilization. You cannot control just pitch as the roll channel floats and then eventually drifts. That is a pain.

Third, if you plan to use a different camera or add a filter, you must change power and gain settings every time you power up. Apparently, my gimbal does not save settings after I set them. Unfortunately, you would hope there was an easy USB connector to adjust settings via your computer, but you must buy a proprietary adaptor to do so. Why do this at all?

Fourth, vibration isolation to prevent camera jello is sub-par. Decent experimentation is needed even on a fully balanced rig.

Overall, I cannot recommend this gimbal despite it's low price. It's finicky and just wasn't properly designed to "make sense".
Quality
Value
Overall
Quality
Value
Overall
TENGAN MUCHO CUIDADO CON LA POLITICA DE PRECIOS DE LA MARCA HOBBYKING
HOY TIENEN UN PRECIO Y MAÑANA OTRO , ES INDICNANTE .
TENGAN MUCHO CUIDADO CON ESTOS SEÑORES , PARA MI SON UNOS INCONPETENTES!
Quality
Value
Overall
Quality
Value
Overall
This product is purchased in order to use the camera for fpv.

There are a lot of expectations.
Quality
Value
Overall
Quality
Value
Overall
I can't give a proper rating for this, since I haven't been able to properly test it. The gimbal is by Quanum and claims to be compatible with the Quanum Nova, but neither the screws that came with the Nova, nor the screws that came with the gimbal can be used to attach the gimbal to the quad copter.
The Nova has four threaded holes for camera mount in a cross pattern. The sideways pair is M3 and the lengthwise pair appears to be M2.5. So the M3 screws that came with the gimbal don't fit and the M2.5 screws that came with the Nova are too short.
Quality
Value
Overall
Quality
Value
Overall
quality is not that great but is very cheap!
Quality
Value
Overall
Quality
Value
Overall
Great product for the money, I bought one of these after damaging an expensive zenmuse gimbal, this is easily 90pcnt just as good as a zenmuse. Easy to set up, I use with a Turnigy Action Cam HD without any issues.
Quality
Value
Overall
Quality
Value
Overall
I was a bit disappointed because you cannot control yaw from the Tx, but it works pretty well. I did have to zip tie the white balls because they caused tons of vibration during flight.
Quality
Value
Overall
Quality
Value
Overall
Very disappointed with this gear. 1) Although advertised as ideal for the Quanum Nova, it is in fact it is too tall. It will touch the ground if you don't install some extra pads to the landing gear. 2) It points some degrees to the right all the time. 3) The pitch and roll potentiometers have no effect. 4) It does not center in accordance with the transmitter knobs. 5) It is not possible to limit the yaw stabilization, so will be looking at the Nova landing gear every time you make a turn. 6) The instructions manual is an absolute disaster. HK should hire English native speakers to review their manuals before releasing the product. I do not recommend this to be installed on the Quanum Nova quadcopter.
Quality
Value
Overall
Quality
Value
Overall
Going to it's travel limits my Q-3D is starting to behave very strange but in normal working conditions it just works great!
Quality
Value
Overall
Quality
Value
Overall
to mount it in quanum nova it requires 2 M3X8 bolts that are not included. the motors seem to be little weak.
Quality
Value
Overall
View all reviews
Upload
Videos
  • Quanum Q-3D 3 Axis Gimbal

Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.