Quanum RunCam2 V2 Docking Station with 600mW 40ch Transmitter
Quanum RunCam2 V2 Docking Station with 600mW 40ch Transmitter
Awesome!
There can be no better way to transform your RunCam2 Action Camera into a First Person Video (FPV) camera than using this purpose built Quanum RunCam2 Docking Station.
The easy to use, built-in, 600mW 40 channel Video Transmitter provides a stable video feed to your goggles or ground station monitor. This video transmitter has all your Fatshark and Skyzone channels as well as raceband making it compatible with most goggles. Changing channels is as easy as a button press with LEDs indicating what channel and frequency you are using. There is also a connector so that you can add an OSD to the system to your display.
All components are provided to have you operational in minutes. The kit comes complete with an SMA Antenna and JST power lead. Power to the unit can be supplied via 2~4S LiPoly batteries. While the unit is powered on it is also changing your camera battery. There is a velcro strap mounting bracket for easy installation.
What an easy conversion for your RunCam2 Action Camera to provide quality FPV video feed.
Features:
• Built in BEC to power and charge the RunCam2
• Fatshark and Skyzone compatible
• 40 channels
• Not affected by 2.4GHz radios
• Strap mounting slots for quick and easy installation
• Neat one piece installation of camera and transmitter
• Wide range of input voltages (2~4S)
• 600mW RF power output
• Operating Range 1.5 kilometers (open areas)
• Connector for OSD
Specs:
Transmitting Frequency: 5.6~5.9GHz (40ch)
Modulation: Wideband frequency modulation
Operating Voltage: 7-16.8V (Recommend 2~4s LiPoly)
Supply Current: 260mA
Video Input Level: 1V ±0.2Vp-p/75 ohms
TV System: PAL/NTSC
RF Output Power: 600mW (27dBm)
Range: 1.5 kilometers
Antenna Connector: SMA female
Weight (Docking Station Only): 33g
Dimensions: 89.9 x 41.3 x 23.6 mm (excluding antenna)
Operating Temperature: -10~+85°C
Includes:
1 x Quanum RunCam2 Docking Station
1 x Antenna with SMA connector
1 x Jumper
1 x JST Power cable
NOTE: This docking station is suitable for the RunCam2 action camera only.
Registrati per caricare video, per favore accedi o registrati
Registrati per scrivere recensioni, per favore accedi o registrati
Juha | Acquirente verificato
-
Overall
-
Quality
-
Value
Good product but problem with the OSD.
Jul 05, 2017
Essential RC | Acquirente verificato
-
Overall
-
Quality
-
Value
Awesome add-on for RunCam2
Jan 29, 2017
| Bad directions | Download [137] |
Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!
