Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Quanum Venture FPV Deluxe Quadrirotore Set w / DJI Fatshark & ​​Afro Parts (PNF)

Generating Links

Quanum Venture FPV Deluxe Quadrirotore Set w / DJI Fatshark & ​​Afro Parts (PNF)

Prezzo:

Now save risparmia 0,00 € 0,00 €

383,63 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9171000501-0
Spedizione gratuita? Clicca qui per saperne di più!

Il Quanum Venture FPV Quadcopter. E 'tempo di esplorare più.

Questo pacchetto Deluxe utilizza solo i migliori componenti che includono un DJI Naza Lite con GPS, fotocamera da Fatshark 250mW di video tx e 600TVL FPV sintonizzati, MultiStar 2213 motori e abbinato 20A afro ESC di per una spina e volano esperienza FPV come nessun altro.

Il Venture FPV Quad iniziato la vita come un H-quad dando la fotocamera una vista libera in avanti del cielo avanti, oltre a permettere la separazione attrezzature ottimale per ridurre al minimo la trasmissione video interfererence & perfetto posizionamento controllore di volo per il DJI Naza. Con un layout ha deciso, una cornice modanata scopo elegante costruito stata forgiata con una trave principale in alluminio e il rafforzamento unibody. Tutte le migliori disposizioni sono state prese in considerazione, rendendo il Venture al meglio FPV croce cornice piattaforma disponibile con opzioni e disposizioni al di là di qualsiasi altra Quad nella sua classe.

Il telaio Venture ha un longherone centro a cui attribuiscono maggior parte dei componenti. La scheda di distribuzione / potenza ESC monte ha pre-montato 20A afro ESC di e filtrata linee elettriche FPV. Gestisce anche il montaggio della batteria centrale. Il supporto di posizione e il modulo di alimentazione multi-mount FC è pre-dotato di un DJI Naza Lite e il modulo / USB UBEC remoto. I bracci trasversali consentono per il cablaggio in-tubo ed i supporti del motore non solo guardare bene, ma proteggere gli inclusi 2213 motori MULTISTAR e avere opzioni skid atterraggio sostituibili / opzionali. Il braccio anteriore con attacco case un protetto cubo di montaggio centro fotocamera con un Fatshark FPV sintonizzato 600TVL fotocamera pre-installato e cablato con tamponi di isolamento dalle vibrazioni. Il guscio unibody in basso modellato attribuisce ai bracci e Spar e contiene disposizioni per la sospensione cardanica universale montaggio e pattini alti come opzione. Il guscio inferiore ha anche una rigida top roll bar croce che svolge anche il ruolo di monte GPS. Nella parte posteriore del guscio inferiore un cubo montaggio per trasmettitore video Fatshark 250mW FPV incluso. Il guscio superiore è termoformato in policarbonato per un equilibrio di peso e forza e presta bene alla personalizzazione. porte di accesso sono stati fatti per tutti i tipi di attrezzi quindi la manutenzione è un gioco da ragazzi.

Il pacchetto Deluxe si richiede solo di installare il ricevitore radio preferita e calibrare il trasmettitore, caricare la vostra batteria 3s 2200 e scivolare su gli occhiali FPV per un'esperienza elevata. Se sei nuovo di FPV o semplicemente si vuole un multi-rotore che si può tirare fuori la parte posteriore della macchina e volare FPV senza problemi, il grande design e componenti di alta qualità rendono l'edizione Quanum Venture Deluxe una piattaforma ci si può fidare .

Il Venture è una evoluzione raffinata di DNA multi-rotore, ed esemplifica l'uso croce senza compromessi.

Caratteristiche:
• divertimento Goggle pronto FPV
• pre installato e messo a punto DJI NAZA con GPS
• pre installato motori MULTISTAR e abbinati afro 20A ESC di
• pre installato fotocamera Fatshark 600TVL FPV sintonizzati e il video 250mW TX
• / ATTI / RTH / Acro modalità di volo GPS
• costruzione Unibody con disponibilità ricambi
• montaggio Quad ESC / PDB con il potere FPV filtrata
• supporti del motore eleganti protette
• il montaggio universale giunto cardanico e le opzioni di skid alti
• Disposizioni per tutti i tipi di apparecchiature preformata
• Styled guarda con vera funzionalità
• Motori pre-installati e ESC

Specifiche:
Passo: 430 millimetri
Peso: 440g (AUW 1050g w / batteria)
Max prop: 8 ~ 10inch
Montaggio FC: GPS Naza Lite preinstallato
Distribuzione di energia: 4 Afro 20A ESC pre-installato con cavo di alimentazione XT60
Motori: 2213 935KV Multistar Motors pre-installato
Fotocamera FPV: Fatshark 600TVL FPV sintonizzato CMOS
FPV TX: Fatshark 250mW 8 canali video TX preinstallato
Montaggio del giunto cardanico: quadrato di 45mm e 40 millimetri di mezzeria

Per le specifiche e le informazioni sui singoli componenti si prega di visitare la pagina associata sotto le voci relative

Incluso:
cornice Quanum Venture FPV
DJI Naza Lite con GPS
fotocamera Fatshark 600TVL FPV Tuned CMOS
Fatshark 250mW FPV video di TX
4 x Afro 20A ESC pre-installato
4 x 2213 motori Multistar 935kv pre-installato
4 x Eliche 8x4.5
set Chiave
Hardware
istruzione

Parti da non perdere:
5CH Radio
batteria 2200 ~ 4000 3s

Nota: libera offerta di trasporto è disponibile solo per questo prodotto. L'offerta non è disponibile quando gli altri elementi sono nel carrello.

  • Quanum Venture FPV Deluxe Quad Copter Set w/ DJI FatShark & Afro Parts
  • Quanum Venture Low and High altitudes
  • Tight spot landing no problem for the Venture
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Eduard | Acquirente verificato

  • Overall
  • Quality
  • Value

Don't crash, no spares from HK

Dec 26, 2017

Had a hard(ish) crash due ti signal disappearing for no known reason and the motor mounts busted. Found out that HK carries no spares and says its because the manufacturer does not supply them? then why sell the drone?
Mixed feeling about it when it flew, but now a complete waste of money and time.
Do not buy this drone untill they carry spares or you will be the same as me.
highly disappointed

SC | Acquirente verificato

  • Overall
  • Quality
  • Value

Bought at discount, value good but not a good combination

Nov 20, 2017

Interesting this is my first time writing review in HobbyKing, even after over 10 plus orders during last year. I must say this is a controversial purchase. I bought this PNF at discount price, and it is truely dollar to dollar value. Considering the 4 motors, 4 ESCs, 1 camera, 1 VTX and 1 set of Naza lite plus a frame is absolutely out value compare to the price you paid individually. Qaulity-wise, when I revceived the product, you felt immediate that it has been in stock for quite some time, and I am ok with that because it doesn't hinder the function. My initial purchase to this quad was simply felt the value for money.
This is not my first quad though, I had built APM, Naze, SP3. But I never tried Naza so I thought this will be interesting too. But I must say that the performance of this quad is quite unpredicatable, maybe due to the fact that it is using Naza and a heavy quad. First, the power is not good, I tried 4S 8045 prop, 3S 1045 and 4S 1045, 4S will get motor a bit hot on 1045. but still you feel heavy, and no 'punch' feel, I mean in manaul mode. Secondly, the Naza in Manual mode seems to aid the yaw, I tried high Yaw gain over 170% to down to 80%, still when turn you get that a bit extra turn even after you release the yaw stick way before. I am pretty sure that the Naza is using the mangetometer to adjust yaw EVEN IN MANAUL mode unless mine is faulty. Although I cannot confirm that but if so that is crazy and cost me crashed my quad yesterday. When the quad is heavy and no 'punch' like power, unexpected yaw will leave you no room to save/correct the quad. By the way, I have upgraded the Naza lite to V2 too, and it doesn't help in that control perspective.
In GPS mode, you are ok to fly and hover, as long as not windy and turn (yaw slowly). But if you want to fly this FPV, you need to add the OSD since you wont know the battery level, speed etc. I extract the box GPS signal and linked to a micro Minmosd to add the OSD. However, because the signal line is so long from head camera to tail Vtx, even with separate power source, you will still see the motor noise (horizontal) on the screen. That I can't fix, maybe due to the venture is relatively long and the signal line in the quad acts like antenna picking up noise.
Another issue that you cannot set the Altitude gain too high, otherwise it will be very unstable in high wind situation, stay at 110% level. I had experienced that in GPS mode, it suddenly wobble and dropped over 20 m quickly and I had to switch to manual mode and made a softer landing.
One last thing, since I have destroyed one motor mount yesterday, and I found that there are no parts. I am considering to try 3D print, a person 'flyingman' has posted a motor mount 3D print file since 2015. That I might try, not sure if PLA will hard enough to sustain the tension required. I am a bit doubt with the weight and I am a bit worried that if it break in mid air, I might end up lose everything. If all not work, I might dismantle the component and move to a carbon fibre frame with Betaflight or iNav instead. And I will not use the Naza again.... But rest parts can be reused.
So interesting thing, is that, if you don't count the Naza lite set, you might be able to buy the rest with a carbon fibre frame at that price, but adding a F3 board and a GPS might be closed to the money you paying. However, that require more work.
For me, fiddling around all the tuning, trying something never tried and finally can reuse over 50% of component cost is a good value. So thats all my bits and pieces that I found out with this discount Qaud.

Gary | Acquirente verificato

  • Overall
  • Quality
  • Value

Great

Nov 06, 2017

I have two of these and you cannot get better value for money.

Gary | Acquirente verificato

  • Overall
  • Quality
  • Value

Great

Nov 06, 2017

I have two of these and you cannot get better value for money.

Gary | Acquirente verificato

  • Overall
  • Quality
  • Value

Great

Nov 06, 2017

I have two of these and you cannot get better value for money.

Steve | Acquirente verificato

  • Overall
  • Quality
  • Value

Good value

Aug 18, 2017

Given the price there is nothing to complain about. Takes some sorting out. Great value and really fun.

Alex | Acquirente verificato

  • Overall
  • Quality
  • Value

First time into quads, very pleased

Jun 19, 2017

I am NOT into FPV and have no Goggles, just intended to fly is as I would fly normally my other RC planes. Managed to finally get the setup right and managed a few minutes of hover and back to me.
I want to be able to record the flight video and play it after the flight, hope someone here can help me with what item I need to buy for that. Some on board video recorder, what?

Cheers

Kevin | Acquirente verificato

  • Overall
  • Quality
  • Value

Great For The Price

Apr 12, 2017

Have fitted it with T Motor 9545 props and squeezed a 5200mah battery and i'm getting 21mins flight time with all up weight of around 1300 gms

D-MONEY | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 03, 2016

ISSUE 1 - The fact that there was no shipping paid on an international shipment made customs hold my package 3 extra days then just had the post office charge me $70 in import taxes.
ISSUE 2 - The amount of calibration for this thing right out of the box was a little excessive, and it still doesn't fly that well. I mean it "flies" but it sucks all the fun out of FPV when you don't trust it. It sinks when you turn and drifts like crazy. I'm used to my 260 which is insane in the air. This thing is slow and unstable, but I'm not giving up the fine tuning. I've spent hours trying to find solutions online but I'm starting to think mine might have FC problems.
ISSUE 3 - The props it comes with are too small. 9's help a lot, I'm getting some 10's next.
ISSUE 4 - Obviously the price. It's way too high for what you get. Make it RTF for the current price. Sure it looks cool, but its a tank in the air. No agility... I mean NONE. The perfect reviews must not know the joy of race class quads ;)

William | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 02, 2016

Holy crap what a value! I picked up this FatShark/Multistar equipped combo for $170, or half off. The included flight controller alone is worth that much! Factor in the normally expensive FatShark cam and VTx, MultiStar and Afro power setup, not to mention this great frame, and you wonder why you haven't already bought one!

I've been flying with the included 8" props, NanoTech 3S 3300mah 65C, in stock form. 10 minutes leaves 11.4V on the battery, or 3.8V per cell. Wow.

The frame and FC combination needs yaw gain added out of the box, to compensate for the added surface of the canopy compared to most quads of its size. Setting switch positions in the DJI GUI with my Taranis/D4R-II combination was maddening, involving end-point adjustments and curves, (Nerds: different modes are selected at different PW, in a weird bandwidth of the normal 1000-2000ms spectrum). But once that was done, (thank you YouTube), it was easy to get the thing up in the air.

Menacing. Holy crap. This thing looks mean in the air. I wish the bottom tray embraced the style of the canopy, though, because it's a boring piece of grey ABS, not flat black and edgy. The included power system has more than enough room for adding on, so far I've hoisted a Mobius gimbal with no issue, LEDs are next!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
File dei clienti
No File Name Download [2028]
No File Name Download [2894]
NAZA FILE LITE Download [0]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!