Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Racer Cat 60 Balsa 1.600 millimetri Glow (arancione) (ARF)

Generating Links

Racer Cat 60 Balsa 1.600 millimetri Glow (arancione) (ARF)

Prezzo:

Now save risparmia 0,00 € 0,00 €

156,46 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
RacerCat-WO
Spedizione gratuita? Clicca qui per saperne di più!

Guardando come si sta facendo 100 mph ancora in piedi, il gatto Racer è un tutto a tutti modello di piloti che vi darà ore di divertimento. Il gatto Racer è di buone dimensioni e la combinazione di colori interessante è grande per l'orientamento. Quanto più si guarda a questo ARF, tanto più impressiona di qualità, superbamente applicate copre Oracover, l'hardware è di prim'ordine, il cappuccio e ghette hanno una finitura laccata profonda e la cellula è incredibilmente ben costruito, forte ma leggero.

Progettato sia per un 0.60 a due tempi o motore a corsa 0,90 a quattro, il modello richiede solo servo standard piuttosto essenziali di e così offre un buon mercato, a montaggio rapido. L'ala è impostato 1pc rimovibile in modo il gatto Racer è facile da trasportare e il design dell'ala è impressionante, sezione sottile con un carico alare luce, il tailpane è anche profilo non lamiera piana.

Questo modello offre al pilota RC tanto, capace di velocità o dolce lento volo, modi impeccabili ancora completamente acrobatico, di bell'aspetto ma resistente, il Racer Cat 60 vi farà sorridere e sorridere per gli anni a venire!

Specifiche:
Apertura alare: 1.600 millimetri
Lunghezza: 1.450 millimetri
Ala Area: 45.8dm2
Peso di volo: 3000g
4 canali

include:
Serbatoio carburante e valvolame
Supporto del motore
istruzione
Hardware
decalcomanie

Richiede:
Tuo 4 canali TX / RX
0.60 due tempi o 0.90 a quattro tempi Motore di incandescenza
5 x Servo standard
Receiver batteria (+ UBEC per 2s Lipoly RX batteria)
50 millimetri ~ 55 millimetri Spinner

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Fritz | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 28, 2015

Um dos melhores kits que adquiri at hoje!!!
muito bem construido super rpido estou usando um motor glow 61a servos aerostar de 9,33kg 0.13 de resposta que so perfeitos , muito preciso excelente planeio sem contar que muito rapido minha helice 11x7 bateria de life nanotech de 1700mah nao uso bec mais uma vez hobby king surpreende!!!!

Bruce | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 28, 2015

This is a great model. The quality is very high and the build was very easy and quick. Saito 91 4 stoke gives the model extremely good performance. Maiden flight was simple and easy with no unexpected issues. Landing is easy and straight forward and the glide is very good indeed. This is as good as my H9 Pulse (at a fraction of the cost) which fly's extremely well with a 91 4 stroke. Well done HobbyKing for a very good model. IT ALSO LOOKS GREAT TO
Down side is the fuel tank is too small and the control surface horns are not to my liking and the push rods are the wrong size (too thick) for the outer tube. Therefore only a 4 for overall rating. Build quality of the model is excellent.

fabio983 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 23, 2014

Come gi detto, la ricopertura ottima, il modello molto leggero, sicuramente non ama essere strapazzato troppo, per ora nelle acro di basa non ho avuto problemi.
Tutto l'hardware di buona qualit, il mio motorizzato asp 61 2t, in buona sostanza il classico modello neutro (tutto calettato a 0 gradi), preciso e stabile, anche in atterraggio.
L'unica pecca sono i tubi dei bowden un po' troppo piccoli, quando ci si infila le astine fanno fatica a scorrere....

R | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 24, 2014

Well I have one of these and I am impressed with it flight performance, it flys very smoothly and no bad habbits, have the c of g as instructions say. I have a saio 91 in it.
Built quality is as any artf from known main stream ( good).
Ony two things about it the fuel tank is a bit small for some, and the controll rods supplied for the elevator and rudder are two stiff so you defently have to change those for more flexable rods (no big deal)

Respit | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 03, 2014

Tengo cerca de 30 aviones de Hobbyking, y este es el que viene mejor terminado de todos.

Hoy lo he volado con un ASP .61 y va de lujo. Es rpido, y muy estable en vuelo, como pesa muy poco, es muy fcil de volar.

punzus | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 05, 2013

arrivato ilo modello dall'olanda in 3 giorni, e sono rimasto veramente sorpreso per la fattura, la copertura eccellente, al pari di marche ben pi blasonate e il modello in generale fatto veramente bene, leggero, ma ben costruito. rapporto qualit prezzo eccezionale.

Old Man | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 03, 2012

many months later this plane turned to bug splat when i was flying it like a pylon racer, i have had a lot of high speed fun but the tail plane / elevator
assy parted when i was pulling up and the plane went down. god rest its soul if your your a god botherer ( im not )

DollarDave | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 26, 2012

Electric Conversion



Setup

Rimfire 60

Castle Ice 75

13 x 8 prop

Turnigy 40-50c, 3000mah, 6 cell lipo

Hitec 422 & 645 mg servos

1560 watts peak, 65 amps

All up weight, 6.1 lbs

250 watts per lb max burst

220 average



pretty dang fast for such a heavy plane



Modifications

Reinforce firewall with 3/16 ply doubler

2 dowels in each wing, in addition to HK joiner

Large HK motor mount, cut to allow for cowl

Sliding batter tray, to get battery completely forward

Servos mounted in rear of fuselage for tail surfaces

4/40 ball links and rods on all control surfaces

Upgraded sullivan tail gear, and 4.5 inch foam main wheels

Muffler indention cut out to allow for ventilation, rear exit made from old

wheel pant mounted on bottom of fuselage.



Plane went together beautifully. It's very well designed, great arf. Buy it, it looks great in the air, on the ground or hanging in my man-cave..you won't be disappointed. Flys straight and true, 2 click adjustment on maiden. Crappy video my wife shot is uploaded.

Vincent | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 16, 2012

VERY impressed with the quality. The covering is excellent. Not one wrinkle out of the box. Appears built very well with sufficient glue visible at critical joints. All the hardware looks useable and of good quality. I have over 50 planes and this is better than most of whats available from H9 or GP. Very unique looking plane. I'm sure it will build quickly and easily. I plan on installing a Saito 91 four stroke. Will update on the building and flying ASAP. Good job HK. Price is great for what I received!

JZwerk | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 08, 2012

Hello All,

Just got two of these for my son and me. At this point I am in the middle of assembling them. Overall this is a very nice plane. The covering was wrinkle free when they arrived. The parts are fitting together perfectly. The construction is very good compared to some other Arf's I've had from other companies. The wood is of good quality, much better than most. I think these planes will be a real blast to fly this summer. I did notice two things that could be improved. The fuel proofing on the firewall leaves a bit to be desired. This is easily taken care of with a coat of dope or polyester resin. I usually give most of the arf's another coat anyway. The pushrods are the main area of concern. The metal rods barely go through the guides and are very stiff. They are not satisfactory, but then again, the plane is value priced. Other than the pushrods I really have no complaints. I still think that they will be great planes to fly. Thanks Hobby King.

  1. 1
  2. 2
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori