Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • USA

Flycolor Raptor BLHeli 30A (F390) 2-4s ESC

Flycolor Raptor BLHeli 30A (F390) 2-4s ESC

QTY:

Now save risparmia 8,67 € 8,67 €

Special Price 5,68 € 5,68 €

You save risparmia 8,67 € 8,67 €

Was  14,35 €

Rating:

Stock:
Peso:
15 g
SKU:
261000049-0

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrizione
prodotto

Flycolor continuare a sviluppare i loro regolatori di velocità elettronici e le loro Raptors appena ottenuto più veloce!

Questa è l'ultima versione del Raptor. processore F390 alimentato, è più veloce rispetto alla versione precedente F330 based e questo miglioramento nella velocità significa risposta motoria più veloce.

Questo Raptor ESC è anche un po 'più leggero da mantenere il peso verso il basso è importante soprattutto in applicazioni racing. Bassa resistenza producono poco calore e IC che significa anche una maggiore efficienza.

Pre-lampo con BLHei firmware, è aggiornabile attraverso la suite software BLHeli.

Caratteristiche:
• leggero
• Taglia piccola
• Preflashed con BLHeli Firmware
• F390 alimentato
• Elaborazione DSP
• Efficiente IC produce poco calore
• 2-4s LiPoly
• OPTO ESC

Specifiche:
Ingresso: 2-4s LiPoly
Constant: 30 Amps
Burst: 40 Ampere
BEC: No BEC, solo OPTO
Dimensioni: 27x12x1.6mm
Peso: 6.6g (con fili)

Product
Specifications

Ulteriori informazioni

  • SKU:
    261000049-0
  • Brand:
    No
  • Peso (g)
    15.00
  • Lunghezza
    135.00
  • Larghezza:
    5.00
  • Altezza:
    10.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
These are well made ESCs. In a bench test, the esc was getting hot to touch in about a minute of run @20-22amps, but it let through 35 amps (burst) without problems. Soldering the motor wires wasn't much fun as I had 6 of these.

NOW, these didn't work well on my Quad with multiwii(pwm issues i assume), I tried the firmware upgrade to BLHeli 14.6 using Arduino nano [SILABS BLHeli Bootloader(4way-if)] with adjusted settings and it worked out well. I'll try posting the settings that worked for me here on the files. Cheers!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I bought these esc's to upgrade my recent 20amp dys esc's. So i thought i was buying 30amps but in blheli suite they are showed up as 20amps so that was a bit of a Let down. But i solderd them on my zmr250 with emax 2205 2300 kv "red bottoms " and they perform really well. I left the stock settings exept for motor directions. Not much heat is produced so thats a plus. Lets see how they hold up in time.
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.