Questo piccolo BAE Hawk è incredibile, EPO schiuma, combinata con le sue statistiche piuma significa che sarà molto indulgente del dispari atterraggio inferiore al 100%. 35mm Fan Unità & ESC sono preinstallati come lo sono i servi degli alettoni ed elevatore, il modello è disponibile in 2 pezzi in modo tutto quello che dovete fare quando arriva è collegare lo stabilizzatore verticale, collegare l'apparecchiatura RC a un ricevitore che utilizza Micro Molex 3 conectors Pin, come ad esempio il ricevitore Dipartimento Funzione OrangeRX 4 Micro Channel e si è pronti ad andare ...... dove eravamo rimasti? Ah, sì, l'esecuzione di quei famosi Red Arrows acrobazia nel parco locale, campo da basket, in realtà abbastanza bene da nessuna parte, questi modelli sono uno spasso assoluto quando volato con gli amici, infatti ottenere abbastanza di voi insieme e vedere se si può tirare fuori un po 'di quelli mozzafiato formazione chiusura di routine, le frecce rosse sono famosi per!
La casella del modello arriva in è molto utile non solo per il trasporto il modello per evitare gancio eruzioni cutanee, ma le tasche di ricambio in schiuma di imballaggio sono ideali per trasportare Lipolys pezzi e si avrà così tanto divertimento con questo, vorrei portare alcuni! Questo Hawk è così carino, anche la vostra moglie vi piacerà!
Apertura alare: 363 millimetri
Lunghezza: 431 millimetri
Peso di volo: 95g
Ala Area: 2.35dm2
Carico alare: 40.4g / dm2
EDF: 35 mm con 9000kv Brushless Outrunner Motor
ESC: 6A w / BEC
Servo: 3 x 2 g
3 blade Fan Rotor
Libretto di istruzioni
Tuo 4 canali TX / compatibile con 1,25 mm Molex a 3 pin Connettori)
7.4v 450mAh 2s Lipoly Batteria
Very nice looking Hawk but needed a few modifications. I run this on 3S 450 gensace lips and a H-King 10a esc. Very nice power but didn't try it on 2s. The Aileron control horns needed some glue and tightening and the cockpit is missing the pilots (lol). It's fun to fly but needs a big hard throw to get it movingVery cool micro edf. Hand launching takes a bit of practice but a nice firm toss about 45 degrees gets it up ok. Running stock setup and flys well and straight. Orientation is a bit hard at a distance as it's all red. Max throws for elevator as it is very small and set minimum throws on ailerons as it is very responsive and can be very twitchy at full throttle.
Overall a fun, small and great sounding little edf.Wow I like this T45. I have the red Bae Hawk version, not the white Gosh Hawk scheme. Mine came out of box lovely but had to do sum surgery to get it sweet. I noticed that one of the aelieron servos didn't have tape on it like the elev and other aelieron servo, on closer inspection it is different so I ashume it should be the elev servo and was put in the wrong spot on assembly line. No matter I swapped the right one into aelieron spot and used a turnigy digital 4g servo for elevator after freeing up the rods and running in the epo hinges, much freeier action. I also made little plastic washers for the control rod links to the horns to take out the freeplay. Shortened all the wires and removed some plugs too, but still with a nano tech 2s 350mah my auw (all up weight) is 120g. It shore makes good thrust testing so maiden shortly, then might go 3s setup and try getting auw down a bit more. Too happy can't wait, I have the twin A10 35mm too, it was heavy but flys excellently like a bigger plane.Very powerfull jet. It's my first one, and I'm in love with it. I fly with my nanotech 300mah or 450 2s lipo.Very beautiful jet to fly!!!!this little red arrow looks very nice and even has 2 little pilots in it,sadly flight wise it is very under powered on the 2 cell set up and barley has enough thrust to stay airborne,will do rolls but forget loops,also it does not like wind at all and get thrown around but this maybe to do with the lack of power again,3 cell is the only way to go with this if you want it to lastok otimo produto estou no aguardo me recomendaroA cute little model. Mine arrived with slightly warped tailplane halves. Easily straightened and strengthened by cutting slots in the underside and inserting some flat carbon strip. Did the same on the wing to prevent flex. Hoping that the extra stiffness will make the model groove better. Fitted a dsm-x 6 CH. Rx and 2s 460 turnigy battery. Had to remove foam in the battery bay to get everything in. Cg was spot on with this set upJust received my Hawk from UK Warehouse. Please note that it now has NORMAL SIZE type servo plugs and not the Micro Molex type as described above. It also has servo wire extenders, not good in such a small space. The elevator works through snake/wires and the servo does not have enough power to overcome the friction, so I have installed a slightly larger servo. Having got a RX that is compatible with the micro plugs specifically for this model the size of the plugs and extension wires is a major spoiler. The receiver was ordered and included at the same time, no comment from HK, sad really that they make this type of error.Mine also arrived this morning with standard servo connectors. Lovely looking plane. But don't tell the wife coz I'm not supposed to see it till Christmas :). Could someone tell me if there is supposed to be something under the nose of this plane as mine has a small square slot?