Registrati

Product Finder

Impostazioni

Useful links

 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global

Red Swan Laser Cut Balsa KIT 1250 millimetri (Kit)

Red Swan Laser Cut Balsa KIT 1250 millimetri (Kit)

QTY:

Now save risparmia 0,00 € 0,00 €

26,48 €
Stock:
Peso:
935 g
SKU:
099000032

Suggestion Box

Please let us know if you found any issues with this product listing.
We take our customer comments very seriously and in many cases our website modifications and product updates are a result of your comments!

Price War

If you've seen a product elsewhere for a better price, please let us know! HobbyKing pride themselves on offering the best price, so if there if you see something cheaper elsewhere, let us know!

Descrizione
prodotto

Ecco un altro grande corredo di balsa poco conveniente per la tradizionale R C hobbysta / e costruttore che gode la costruzione di modelli dalla forma kit.

La Swan Red è un tutto costruito, 4 canali, elettrico alimentato parco volare la vela. È dotato di taglienti accurati pezzi tagliati a laser che è sufficiente inserire insieme con poca confusione e l'ala sembra fantastico quando sono coperte con rivestimento trasparente per mostrare della costruzione.

Il sistema di alimentazione può essere un semplice piccola batteria outrunner e 2s, usando micro servi per mantenere la sua piacevole e leggero.

Il modello risultante è un piccolo grande parco mosca aliante elettrico che si comporta bene, ha alettoni / elevatore / direzionale / di controllo del motore, ma è abbastanza duro per gestire la strana 'oops!' momento da volantini alle prime armi e abbastanza compatto da poter essere trasportati facilmente.

Specifiche:
Span: 1250m
Lunghezza: 810 millimetri

Richiede:
4 sistema radio Channel e 4 x micro servi
1550kv 15amp Outrunner
15Amp Esc
Batteria 2 o 3 secondi 1300mAh Lipo
Elica (8 x 4)
colla CA
coprendo pellicola
Strumenti di base per hobby (coltello, carta vetrata, ecc)

Costruire manuale elencati sotto la scheda 'File' in basso

Product
Specifications

Ulteriori informazioni

  • SKU:
    099000032
  • Brand:
    No
  • Peso (g)
    935.00
  • Lunghezza
    800.00
  • Larghezza:
    70.00
  • Altezza:
    140.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

Quality
Value
Overall
Nice little kit for the money. need a bit of experience to build it. instructions a little bare to say the least!
Quality
Value
Overall
Quality
Value
Overall
fantastico, ne ho presi 2 a magazzino e uno sempre con me, 1400k lipo 1500-1600 prop 9*4
Quality
Value
Overall
Quality
Value
Overall
This kit is THE kit for those who love the old school balsa kit..
Wood is good in general and laser-cut parts saves valuable time.

That said, this is not for beginners, the building notes are nonexistent and it is necessary to go on the net to find build logs, fortunately quite numerous.

I just have two disappointments, after assembling and flying with the Red Swan:
First, it is quite heavy. Ready to fly weighed approx 700gr.
For a wingspan of 1224mm he had to fly fast enough to generate the necessary lift.

Then, the weak point is the horizontal stabilizer. It is very close to the ground and the landing must be perfectly horizontal on a very flat surface. The slightest clod of dirt or grass can easily pull the horizontal stabilizer off.
This happened to me twice. The first time the tail has been torn, I rebuilt the entire tail section in plain balsa, much stronger.
Alas, he clung to a clump of grass and the section of the fuselage near the tail (with holes for pushrods) broke ... :(

That said, it's a nice old school kit for a handyman with experience and a good flat ground for landing.

I posted 3 pictures of my Red Swan ( The under files section Cardinal ) just before the maiden flight
Quality
Value
Overall
Quality
Value
Overall
NIcely cut kit. A lot of fun to build, and they look great when complete. I wish hobbyking would stock more laser cut kits.
Quality
Value
Overall
Quality
Value
Overall
Fine construction, precise laser-cut parts, but wrong building instructions:
First, the 2 fuselage sides must be prepared with strengthening sticks first, then glued together with bulkhead parts, servo tray and motor mount in one step to avoid distortion!
Second, the order of wing ribs is wrong in the picture as well as in text part 2.02. Correct is 6 pc. B3 in the middle, then on each side one pc. B4, 5 pc. B5, each parted by a pair of B7 glued at both sides of the balsa spars, finished by one pc. B6. The construction should be done on a board using needles to fix the parts, thus obtaining a straight wing.
Quality
Value
Overall
Quality
Value
Overall
Fine parts, fitting well, but:

Wrong instruction manual!

The two sides of the fuselage must be built symmetrically without yet glueing the bulkhead parts, the motor mount and the servo base. Only when finished, both sides and the mentioned parts must be fitted together in one glueing step.

Otherwise the fuselage will turn out rather distorted!



Second mistake: the denotation of the wing ribs in the picture of the middle wing part and in textpassage 2.02 is wrong. As there are only 2 ribs B4, but 12 pc. B5 and 4 pc. B6, the correct order must be:

6 (or 8? There are 8 pc.!) ribs B3 in the middle, then, spaced by B7, one rib B4, followed by 5 pc. B5 on each side, each spaced by one B7 part, and one B6 rib to strengthen the edges.

The other two B6 should strengthen the edges of the outer wing parts.
Quality
Value
Overall
Quality
Value
Overall
Soft package, no cover film, no plans.
Quality
Value
Overall
Quality
Value
Overall
I missed drawing, so I draw him, I upload to files.
Servos will use HXT500.
Motor temporarily 24 grams hexTronik Brushless Outrunner 1300kv.
Quality
Value
Overall
Quality
Value
Overall
First flight today with a 2822/17 3s and 8*4 prop. Good 3 axes glider slow rolls, loops, inverted flight. Can be used by a beginner (but foamies will be much more crash rsistant...). The manual is really not here to help and 9 gr servos are too big for the ailerons. I have also replace the supplied leading ege of the wing by a carbon fiber tube 3mm. Despite the inexisting and wrong manual, we had good time with my son building this kit and at the end.... Good surprise....great flying capacities!
Quality
Value
Overall
Quality
Value
Overall
So much potential ruined by horrible plans. I'm about 2/3 done and am looking forward to flying it. Search for my build thread on RC Groups . Com for build information. It's been a fun build so far (other than the lack of instructions). Wood quality is decent but heavy, packing is good, and fit of the laser cut parts is ok.
Quality
Value
Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

file di clienti
REDSWAN Pepa drawing PDF ALL Scaricare ora [41kb]
REDSWAN Pepa drawing DXF Scaricare ora [39kb]
REDSWAN Pepa drawing DWG Scaricare ora [43kb]
REDSWAN Pepa drawing PDF 5x6 Scaricare ora [79kb]
REDSWAN Pepa drawing DXF Scaricare ora [39kb]
REDSWAN Pepa drawing DWG Scaricare ora [43kb]
REDSWAN Pepa drawing PDF ALL Scaricare ora [41kb]
Construccion RedSwan Mexico3 Terminado Scaricare ora [442kb]
Construccion RedSwan Mexico Scaricare ora [521kb]
Construccion RedSwan Mexico 2 Scaricare ora [502kb]
Photo Scaricare ora [310kb]
Red Swan Build Manual Scaricare ora [1921kb]
Red Swan with cox engine Scaricare ora [160kb]
Red Swan with cox engine Scaricare ora [205kb]
Red Swan Manual Scaricare ora [1921kb]
From Trentino Scaricare ora [1662kb]
From Trentino Scaricare ora [1662kb]
My Swan Laser from Trentino Scaricare ora [1662kb]
My Swan Laser from Trentino Scaricare ora [1662kb]
plain laser cut black swan Scaricare ora [500kb]
No File Name Scaricare ora [406kb]
Red Swan in TG-3A colors Scaricare ora [787kb]
Red Swan 1- India Scaricare ora [67kb]
Red Swan - Sanjay, India Scaricare ora [1330kb]
No File Name Scaricare ora [67kb]
RED SWAN PAKISTAN Scaricare ora [568kb]
PAKISTAN Scaricare ora [677kb]
RED SWAN MFG PAK Scaricare ora [615kb]
RedSwan_Custom_Design Scaricare ora [89kb]
construction Red Swan 2 axes France Scaricare ora [543kb]
Red Swan modified Scaricare ora [1120kb]
No File Name Scaricare ora [1145kb]
No File Name Scaricare ora [813kb]
My red swan named CARDINAL 1/3 Scaricare ora [183kb]
My red swan named CARDINAL 2/3 Scaricare ora [177kb]
My red swan named CARDINAL 3/3 Scaricare ora [166kb]
Redswan Scaricare ora [1145kb]
With ap 0.061 nitro engine Scaricare ora [6188kb]
my first one Scaricare ora [66kb]

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.