Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

ROKAF T-50 70 millimetri EDF Jet (KIT)

Generating Links

ROKAF T-50 70 millimetri EDF Jet (KIT)

Prezzo:

Now save risparmia 0,00 € 0,00 €

96,06 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
T-50 KIT Gold
Spedizione gratuita? Clicca qui per saperne di più!

Alla ricerca di qualcosa di diverso in un foamie EDF? Poi 70mm Jet ROKAF T-50 è per voi! Finito nella combinazione di colori Repubblica di Corea Air force con grande attenzione ai dettagli la ROKAF T-50 ha qualche asso è a maniche. Il dettaglio cabina Scala è motorizzato e può essere aperta o chiusa utilizzando un canale di riserva sul vostro trasmettitore! Il sistema di ritrazione incluso dispone anche di porte funzionali che chiudono completamente una volta che le ritrae sono stivati. Tutti i circuiti di controllo e l'hardware sono inclusi per il baldacchino e si ritrae con questo kit.

L'unità di 70 millimetri FES incluso richiede un FES motore 28 Dimensioni intorno 2650kv ed è consigliato un 2200mAh Lipo 4S. Una selezione di armamenti sono inclusi anche nel kit che consentono di personalizzare l'aspetto del tuo jet. Si richiederà anche cinque 9gram servi un 45Amp o superiore ESC e il proprio trasmettitore 6 canali e ricevitore (Tx / Rx)

Specifica:
Apertura alare: 820 millimetri
Lunghezza: 1.050 millimetri
Peso: 1200g
Motore: 28 Dimensioni FES Brushless 2650kv (Obbligatorio)
Unità di EDF: 70mm
ESC: 45A (obbligatorio)
Batteria: 14.8V 2200mAh 4s Lipo (Obbligatorio)
Vano batterie: 120 x 33 x32mm (MAX)
Servo: 5 x 9g (Obbligatorio)

richiesto:
ESC: 45A
Servo: 5 x 9g
Il tuo TX e RX (6 canali minima)
batteria lipo 14.8V 2200mAh 4s Lipoh

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Thomas | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 29, 2011

You vil need a, servo revers for one of the elevator servos.

And the motor in the combo recomendation(Turnegi 2226) does not fit the fan as it is 29mm and the fan is for 28mm!!

The plane it self looks nice, but seems a bit on the havy side for this fan!

pejay | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 03, 2011

Tested the fan unit. I use the recommended HK2839EDF Outrunner 2800 kV and 4 cell 2.200 mAh Turnigy 20-30C. I held the fan in my hand which is not ideal since when pressing the fan housing it becomes oval and the fan blades touch the wall. But anyhow, balance on fan blade unit was better than most plastic fans I have and power is fantastic. Could hardly hold it at 400 Watt which was not max speed. So I am sure this fan set up is more than sufficient and will rocket the plane. The fan is fitted to the 4 mm motor shaft with a collet chuck and it fits very well.

pejay | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 03, 2011

Just received the plane and it is truly fantastic. Very beautiful. Manual of course stinks so it took some time to figure out how to activate the servos so you can open up the canopy. There is an external battery connector at the underside of the body. You need to connect this and then plug in the servo leads to a servo tester. Channel 6 is for the retracts and channel 5 is for the canopy. The retracts and canopy servos are great - only these items are woth the price of the whole plane. A really fantastic low price. Can't wait to put it together and do the maiden flight. And by the way, fan seems to be of good quality but haven't tested it yet. Hope the blade has OK balance. But this plane can also fit the EPF fan sold here. I may use this instead. Will let you know.

ernie69_2000 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 21, 2011

I purchased this item from a company here is Oz. This one will come from the same manufacturer and I have to say it's fantastic. The guy complaining about the wing loading is wrong. At 1/4 throttle it just floats. I have the Black / Gold version which I'm sure they will bring out soon. The F-35 pilots are the perfect size. Worm gear retracts work perfect. Also, the canopy opens and closes so you can put the battery in it. C of G is recommended at 74-76mm from the start of the leading edge of the wing. When the Black one arrives I'll buy one from here just for spares. The price is great too. They cost around $300-350 Oz. Definately something a bit different to have at your field

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori