New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

RotorBits Servo Mount Set w / Gear (verde)

RotorBits Servo Mount Set w / Gear (verde)

Shipped From:
  • Global
QTY:

Now save risparmia 3,85 € 3,85 €

Special Price 1,94 € 1,94 €

You save risparmia 3,85 € 3,85 €

Was  5,79 €

Stato:
Disponibile
SKU:
171000395-0
WANT FREE SHIPPING? Click here to find out more!

Solo perché si può avere superato i vostri set di Lego e Erector non significa che il divertimento deve finire. L'introduzione RotorBits, la costruzione insieme modulare di infinite possibilità. Sulla base del concetto di connessioni e dimensioni standardizzate, l'unico limite a ciò che può essere costruito è la vostra immaginazione.

RotorBits possono essere riciclati e riutilizzati in altre creazioni, mix e la congruenza diversi bit per fare un Y6 o bi-rotore! Come la tua collezione di bit cresce e concetti si evolvono con plug & play facile, che sa quello che si può trovare? Avere competizioni per club per le idee creative o razze per la scatola più veloce per l'aria costruisce. RotorBits è una idea che non può mai essere superata solo riconfigurato.

RotorBits Servo Mount Set w / Gear (verde)

Specifiche:
Dimensioni (LxPxA): 84 x 30 x 18 millimetri
Tubo Foro di montaggio: 10 x 10mm
Piastra Servo (LxP): 24 x 23,5 millimetri
Servo Apator: 21 Teeth
Motore Foro di montaggio: 17mm (Foro al foro)
Peso: 39.1g
Colore: Nero

  • SKU 171000395-0
  • Brand RotorBits
  • Capacità ( mAh ) -
  • Peso 48.0000
  • Lunghezza 60.00
  • Larghezza 20.00
  • Altezza 50.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Lot of play added to the servo play it's pretty difficult to get the tricopter holding the tail directtion more than 10 seconds.

Beaucoup de jeu dans le mécanisme, si on rajoute le jeu du servo ça devient difficile de garder le cap pendant plus de 10 secondes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Lot of play added to the servo play it's pretty difficult to get the tricopter holding the tail directtion more than 10 seconds.

Beaucoup de jeu dans le mécanisme, si on rajoute le jeu du servo ça devient difficile de garder le cap pendant plus de 10 secondes.

Works great is strong but there is a small amount of slop however. But if you fix and tweet it enough you can fix that

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Works great is strong but there is a small amount of slop however. But if you fix and tweet it enough you can fix that

Nice Servo Mount for building the Tricoter

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice Servo Mount for building the Tricoter

fitting for motor mount / axle is bad, have to be glued in. Screws are poor quuality. fitting for servo gear could be more universal - using the HK-15178B Digital MG Servo its fine, but the servo mount dont fit. Will taper the axle for using ball bearing, for softer working.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

fitting for motor mount / axle is bad, have to be glued in. Screws are poor quuality. fitting for servo gear could be more universal - using the HK-15178B Digital MG Servo its fine, but the servo mount dont fit. Will taper the axle for using ball bearing, for softer working.

Just revceived my rotor bits and can say they are of good quality and I am
very pleased.Took a bit of time to get the servo to sit just right but at the price I certainly can not complain.Thanks hobbyking another good product
at a great price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just revceived my rotor bits and can say they are of good quality and I am
very pleased.Took a bit of time to get the servo to sit just right but at the price I certainly can not complain.Thanks hobbyking another good product
at a great price.

All of these are to small, try building a hex or octo and you will see what I mean. 10mm x 10mm inside hole measurement is just way to small. You Rotorbits people need to make these with 12.5mm holes and 15mm hole to make larger applications stronger. If these Rororbit parts had larger inside holes to fit the booms and arms we fliers use these would sell more. The Tri Copter yaw mechanism is a great idea but just to small to use on anything else but Rotorbits arms and most of us will not use arms and booms with that small of a diameter....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

All of these are to small, try building a hex or octo and you will see what I mean. 10mm x 10mm inside hole measurement is just way to small. You Rotorbits people need to make these with 12.5mm holes and 15mm hole to make larger applications stronger. If these Rororbit parts had larger inside holes to fit the booms and arms we fliers use these would sell more. The Tri Copter yaw mechanism is a great idea but just to small to use on anything else but Rotorbits arms and most of us will not use arms and booms with that small of a diameter....

I like these Rotor Bits.

Very high quality of the pieces I have so far used.

Fast can your innermost multirotor dreams be realized.

The only small downside so far is that the yaw mechanism need some glue between the plastic and outer shaft.

If you don't have access to a complete mechanic workshop these things are awesome.:)

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I like these Rotor Bits.

Very high quality of the pieces I have so far used.

Fast can your innermost multirotor dreams be realized.

The only small downside so far is that the yaw mechanism need some glue between the plastic and outer shaft.

If you don't have access to a complete mechanic workshop these things are awesome.:)

Customer files
exploded view of rotorbits servo mount Download [234]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save