New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Kit TriCopter RotorBits Con Sistema modulare di montaggio (KIT)

Kit TriCopter RotorBits Con Sistema modulare di montaggio (KIT)

Now save risparmia 25,51 € 25,51 €

Special Price 4,40 € 4,40 €

You save risparmia 25,51 € 25,51 €

Was  29,91 €

Stato:
Non disponibile!
SKU:
171000412-0
WANT FREE SHIPPING? Click here to find out more!

Solo perché si può avere superato i vostri set di Lego e Erector non significa che il divertimento deve finire. L'introduzione RotorBits, la costruzione insieme modulare di infinite possibilità. Sulla base del concetto di connessioni e dimensioni standardizzate, l'unico limite a ciò che può essere costruito è la vostra immaginazione.

I RotorBits Tri-Copter è un adattamento ingegnoso delle parti modulari RotorBits, per creare un introito semplicistico unico sul tanto amato e grande volano tri-elicottero. Uno dei bit uniche utilizzate nel Tri-elicottero, è il meccanismo di inclinazione reti a maglie. Il meccanismo di inclinazione prende il gruppo di inclinazione del motore precedentemente complesso e semplifica il basso per solo due ingranaggi e un servo. L'unità di inclinazione modulare può solo scivolare su qualsiasi albero RotorBits 10 mm. La piastra centrale TRI dai colori vivaci ha 45x45mm integrato perni di montaggio per il controllore di volo e varie disposizioni per adattare altri accessori e pezzi. I pattini di atterraggio hanno un design fuga fascetta e la luna lander piedi tazza arrotondati per terra divertimento scrematura. L'idea semplice modulare rende il montaggio un gioco da ragazzi, portando divertimento di nuovo ad un a volte su un'idea complessa.

RotorBits componenti possono essere scambiati tra più progetti, che consente di mixare e abbinare al contenuto del vostro cuore! Come la tua collezione di bit cresce e concetti si evolvono, troverete che le possibilità sono infinite. Chissà cosa si arriva con il prossimo! RotorBits è un'idea che non può mai essere superata, solo riconfigurato.

Caratteristiche:
• modulare scivolare insieme di costruzione
• nylon e carbonio parte in vetro riempita durevole
• Peso leggero
• parti RotorBits adattabili e riutilizzabili
• rotore basculante ingranaggio condotto

Specifiche:
Altezza: 155 millimetri
Peso: 258g
Passo o dimensione: 555 millimetri

RotorBits inclusi:
3 x longheroni in carbonio
3 x piedi Landing
3 gambe x Landing
1 x Tri centro di montaggio
2 supporti del motore x DST
1 x montaggio servomotore Tilt
1 x Borsa di elementi di fissaggio di montaggio e fascette

richiesto:
3 x DST-1200KV o motore comparabili
3 x 20A CES multi-rotore
1 x servo 9g
3 x 10inch puntelli 2 CW 1 ccw
Il controllore di volo 1 x
1 x 1500 ~ 2200mAh batteria 3s LiPoly 11.1V
1 x 5CH sistema radio

  • SKU 171000412-0
  • Brand RotorBits
  • Capacità ( mAh ) -
  • Peso 630.0000
  • Lunghezza 330.00
  • Larghezza 120.00
  • Altezza 180.00
  • RotorBits TriCopter Kit With Modular Assembly System
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

cumple con mi expectativas. se ve fabricado con muy buena calidad y muy ligero.
deberia llevar los taladros del carbono hechos.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

cumple con mi expectativas. se ve fabricado con muy buena calidad y muy ligero.
deberia llevar los taladros del carbono hechos.

Surprisingly heavy and there is a lot of slop in the servo connection. Most of the slop can be removed by gluing the components together though. Quite enjoying it so far.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Surprisingly heavy and there is a lot of slop in the servo connection. Most of the slop can be removed by gluing the components together though. Quite enjoying it so far.

The RotorBits Tricopter is simple yet elegant and easy to put together! It's like Lego for big kids and can easily be assembled with little knowledge in the area. I love the colour scheme and it is easily orientated in the air. The landing gear is sturdy and the zip-ties hold together really well. My only criticism (and the reason I gave the quality one less star) is because I had do some rectification the servo-tilt section and the gears. The servo they recommended/showed in the picture did not fit in the servo bay and the nylon gear was far too small for the gear teeth and it was hard to fix. I ended up super-gluing it and it managed. HobbyKing perhaps release a new version? Other than that I love it. And it is great value for money!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

The RotorBits Tricopter is simple yet elegant and easy to put together! It's like Lego for big kids and can easily be assembled with little knowledge in the area. I love the colour scheme and it is easily orientated in the air. The landing gear is sturdy and the zip-ties hold together really well. My only criticism (and the reason I gave the quality one less star) is because I had do some rectification the servo-tilt section and the gears. The servo they recommended/showed in the picture did not fit in the servo bay and the nylon gear was far too small for the gear teeth and it was hard to fix. I ended up super-gluing it and it managed. HobbyKing perhaps release a new version? Other than that I love it. And it is great value for money!

Brilliant bit of kit. Got me started and in the air nicely. very please. servo mount is a bit rubbish. but works extreeeemly well for the price.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Brilliant bit of kit. Got me started and in the air nicely. very please. servo mount is a bit rubbish. but works extreeeemly well for the price.

Got one of these in the mail today... Very robust and well designed kit.
Decided to order another one to build for night flying with some led light strips.
Pretty easy to put together.. I used the KK2.1 control board and setting it up was a breeze..
I assigned the autolevel to my landing gear switch so I could easily switch back and forth for acrobatic modes.
I used plush 18 amp esc.. DT 700 kv bell motors and an orange spektrum compatible receiver with satellite Corna 929 metal gear 9 gram servo for the yaw.
10x4.5 slowfly props (2 CW and 1 CCW) and get an easy ten minutes with 2200 mah Turnigy batteries.
I give it a hearty two thumbs up.. (ps.. I didn't use the screws and bolts per directions
I simply drilled a pilot hole and tapped it for the screws on one side.
Built a battery tray with 1.5 glass plate cut 1.25 x 7" and suspended it from the bottom with wire ties.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Got one of these in the mail today... Very robust and well designed kit.
Decided to order another one to build for night flying with some led light strips.
Pretty easy to put together.. I used the KK2.1 control board and setting it up was a breeze..
I assigned the autolevel to my landing gear switch so I could easily switch back and forth for acrobatic modes.
I used plush 18 amp esc.. DT 700 kv bell motors and an orange spektrum compatible receiver with satellite Corna 929 metal gear 9 gram servo for the yaw.
10x4.5 slowfly props (2 CW and 1 CCW) and get an easy ten minutes with 2200 mah Turnigy batteries.
I give it a hearty two thumbs up.. (ps.. I didn't use the screws and bolts per directions
I simply drilled a pilot hole and tapped it for the screws on one side.
Built a battery tray with 1.5 glass plate cut 1.25 x 7" and suspended it from the bottom with wire ties.

I have two rotorbits tricopters and they are excellent very tough. I would highly recommend them
great for general fun flying and they fly great with the KK2 and recommended motors. Thanks Hobbyling for a great bargain.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I have two rotorbits tricopters and they are excellent very tough. I would highly recommend them
great for general fun flying and they fly great with the KK2 and recommended motors. Thanks Hobbyling for a great bargain.

Please do not overlook this frame kit !! I have built and crashed more multirotor kits then I care to admit to. This is the best kit I ever built. The first time that everything fit to a perfect match and ended up being one of the strongest one I have. Very Perice fitting of all components . May be a bit heavy . I love it !!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Please do not overlook this frame kit !! I have built and crashed more multirotor kits then I care to admit to. This is the best kit I ever built. The first time that everything fit to a perfect match and ended up being one of the strongest one I have. Very Perice fitting of all components . May be a bit heavy . I love it !!!!

Received my kit today. A bit disappointed as the carbon fiber rods that come with it don't have holes , so you have to either buy the jig set for it or drill the holes very carefull.

The kit is very neat and nice .It Seems to be strong enough to handle some crashes. But this I will find out soon.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Received my kit today. A bit disappointed as the carbon fiber rods that come with it don't have holes , so you have to either buy the jig set for it or drill the holes very carefull.

The kit is very neat and nice .It Seems to be strong enough to handle some crashes. But this I will find out soon.

Awesome kit. My first multirotor and I was impressed with its quality. My only gripe was the servo mechanism. The recommend led servos do not fit without alot of fiddling around. Otherwise im happy with it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome kit. My first multirotor and I was impressed with its quality. My only gripe was the servo mechanism. The recommend led servos do not fit without alot of fiddling around. Otherwise im happy with it.

This was my first multi-rotor kit so i can't compare it to anything but i will say this i am happy with this kit. It was simple to put together and using the recommended electronics except for using my own servo it flies great . Very stable using the KK 2.1HC. The reason for 4 stars are because it did require some modification to the servo mounting area for my servo to fit properly as well as having play in the back area where the rear motor is mounted on. This was fixed using super glue :) Great product!!! Thanks Hobbyking!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This was my first multi-rotor kit so i can't compare it to anything but i will say this i am happy with this kit. It was simple to put together and using the recommended electronics except for using my own servo it flies great . Very stable using the KK 2.1HC. The reason for 4 stars are because it did require some modification to the servo mounting area for my servo to fit properly as well as having play in the back area where the rear motor is mounted on. This was fixed using super glue :) Great product!!! Thanks Hobbyking!!!

  1. 1
  2. 2
Customer files
No File Name Download [4430]
Theunsie'sTri copter Download [4430]
Total weight 829G,RobbotheDrifter Download [1396]
Y6 LAYOUT Download [99]
Y6 I Download [1007]
Servo Saver Download [176]
Fishing Line Download [120]
Manual Download [499]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save