Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

RX3S OrangeRX 3-Axis Volo Stabilizzatore

Generating Links

RX3S OrangeRX 3-Axis Volo Stabilizzatore

Prezzo:

Now save risparmia 0,00 € 0,00 €

14,54 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9171000102
Spedizione gratuita? Clicca qui per saperne di più!

Utilizzando un singolo ad alta precisione a 3 assi MEMS giroscopio, il OrangeRX 3-Axis Volo stabilizzatore è in grado di stabilizzare il volo su quasi tutti i velivoli ad ala fissa! Esso fornisce una maggiore stabilità correggendo automaticamente i canali alettoni, elevatore e direzionale in volo. Questo compensa le modifiche indesiderate di atteggiamento del velivolo a causa del vento e altri fattori. In breve, rende il vostro aereo molto più stabile in volo!

Il OrangeRX 3-Axis Volo stabilizzatore è grande per coloro che tendono a volare in condizioni di vento, in quanto compenserà raffiche di vento che normalmente spingere il modello attorno. E 'anche un ideale add-on per il vostro modello preferito FPV per tenerlo sulla retta di livello durante il volo.

Questa unità è molto semplice da installare e utilizzare. Le impostazioni del guadagno regolabili sono pre-impostati al 50% offrendo stabilizzazione mite. Si può facilmente regolare il guadagno per ogni canale, se lo desideri per aumentare o diminuire il compenso per il rispettivo canale (AIL, ELE, RUD).

Perché noi progettiamo, prova e realizziamo queste unità completamente in-house (da 3D / 2D di disegno per i materiali di sourcing, assemblaggio finale, ecc), siamo in grado di controllare completamente la produzione e garantire la coerenza del prodotto, dalla progettazione fino alla spedizione del prodotto a voi. Inoltre, la rimozione di intermediari ha fatto sì che possiamo guidare un miglior rapporto al mercato e al minuto queste unità in fabbrica (i nostri) prezzi!

Caratteristiche:
In grado di stabilizzare il volo su quasi tutti i velivoli ad ala fissa
Supporta il volo 3D senza compromettere la stabilità
regolazione del guadagno del giroscopio indipendente per alettoni, elevatore e timone
giroscopio di facile accesso inversione interruttori sul frontale dell'unità
Design compatto e leggero

Specifiche:
Dimensioni: 51x32x14mm
Peso: 14g
IC: Atmega168PA
Gyro: 3-Axis MEMS
Tensione in ingresso: 4.8-6.0V
Interfaccia AVR: standard a 6 ​​pin
Segnale dal ricevitore: 1520us
Segnale di Servo: 1520us

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Foxyy | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 17, 2013

Great gyro, cheaper than buying 3 individual gyros and works better. I haven't had any flutter with it unlike some other gyros. It is very easy to set up using the pots. I mounted it on a gyro pad to reduce vibrations.

WayToo | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 06, 2013

This is the only Hobby King product I have ever given a 5 crown rating. I bought three of these because the price was good but i was very surprised at how well they worked. I put the first one in a Bixler for experimental purposes and found that once you get it set up correctly the airplane becomes almost unconditionally stable in any wind. It does take a little time and effort to adjust the gain settings and they are not the same. I have more gain on the rudder than the ailerons and a bit more still on the elevator but when I put the Bixler in level flight it will maintain level flight. These are not an auto pilot but they actually work and are very good if you fly in wind the way I do. Thumbs up.

Bill | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 05, 2013

Excellent value, have 6 of these, some I am useing the 5v bec in the speed controllers and 2 i am using them coupled direct to a zippy Life 1100ma 6.6v rx batt, i do not know the voltage tolerances but presumed they would expect you could run them in conjunction with their own range of receivers, have had over 20 fiights on this set up and it has performed faultlessly, certainly makes you look a better pilot than what you actually are, one thing i know is when most have packed up because of windy conditions i am able to keep flying and i am only a very average pilot, only time will tell if i am running too high a voltage with the 6.6 volt but until then i am having alot of fun

Emmanuel | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 27, 2012

I never imagined flying in strong winds but my friend encouraged me to try. Not a pleasant experience. I bought this stabilizer to aid my flights. Initially i almost crashed had no clue how it worked. Now i have a good understanding and fly in very strong winds with hands off the radio. Cross wind landings are fun, crabbed all the way with hands off the radio and even touch down crabbed...lol

Just change the attitudes and it holds. I mostly use rudder and elevator and the plane flies fine.

Only thing bothering me was during no wind days had to manually disconnect the stabilizer else not fun. But with the V2 this is also resolved, already ordered the day it came in stock. Just waiting for it to come.

Dan | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 14, 2012

I bought 2 and I'm impressed by the design. One of the dip switches didn't work on the rudder, so I put that one in my little beater jet, the other one works fine. I need a few more and see there is a V2 for 3 dollars more, I think I will try the new one and a megapirate flight controller for my FPV. I have also use head lock gyro's with real time gain but you need 3 to do the same job....you do the math, lol.

Yaroslav07b | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 13, 2012

This is a great product i highly recomend this for your plane

s.l.oliver | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 09, 2012

The stabilizer is quite easy to install and logical to use. However, i am Not Super happy with the single aileron channel. There are ways to use it - but I do not like it !

Emmanuel | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 06, 2012

I tried it on my supercub LP with park 480 in winds 20-25 knots. It was fun. Initially took a while to get the hang of it but after that its been fun fun fun... I do not use aileron option and use only rudder (90pcnt gain) & elevator (75pcnt). Just set your attitude and the plane stays there. I do my approach in strong winds without even touching the controls. Its so much fun. Now i have ordered the newer model with remote option to switch it off.

Ben | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 01, 2012

While I wish there was more on HK's website about the technical aspects of this flight stabilizer, I have to admit that it is great in the wind. I was able to float my Bixler in 40 mph winds and thanks to this stabilizer, I had to do very little inputs on my transmitter.

Does a good job for aerial photography, the main reason I bought it. Would be 5 crowns if more documentation was available.

vargasesteban | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 29, 2012

Very nice product , be careful with the gain it is very sensitive and dont forget to order the extentions from fre receiver to this Gyro
they are MALE TO MALE http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idproduct=21758

File dei clienti
ATmega168AP Download [608]
ITG3205 Download [1126]
No File Name Download [1447]
weight of board alone Download [741]
weight of case alone Download [649]
complete unit weight Download [782]
back of the board Download [769]
Orange Rx Manual R3 by MyCoolRC Download [145]
Larger Pic Download [127]
Larger Pic Download [109]
  1. 1
  2. 2
  3. 3
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!