-
Descrizione
prodotto -
Il SBD4 S.BUS decoder consente di utilizzare qualsiasi mezzo analogico standard o servi digitali con il ricevitore compatibile S.BUS. Questo elimina la necessità di utilizzare i servi specifici costoso S.Bus che consente di utilizzare i vostri modelli servi esistenti.
Dotato di 4 uscite di canale programmabili, è possibile assegnare in modo indipendente ogni servo a un canale di vostra scelta mentre solo il dover collegare un ingresso cavo dal ricevitore. Questo rende il cablaggio molto più ordinata e permette una facile creazione del vostro servo, senza la necessità di esecuzione di più prolunghe.
Questo è un grande dispositivo da utilizzare in combinazione con i nostri ricevitori compatibili arancione 7CH e 9CH S.Bus!
include:
SBD4 S.BUS Decoder
Specifiche:
Uscite Canale: 4 programmabili
Canale Ouput Piombo Lunghezza: 120mm
Lunghezza totale: 255 millimetri
* Nota: carta di programmazione necessario (venduto separatamente) per modificare l'assegnazione delle uscite di canale. -
Product
Specifications -
Ulteriori informazioni
-
SKU:
029000002
-
Brand:
N/A
-
Capacità ( mAh )
N/A
-
Peso (g)
23.00
-
Lunghezza:
100.00
-
Larghezza:
13.00
-
Altezza
65.00
-
SKU:
-
Community
Discussions -
-
Rate&
Review -
These work well with Futaba 8FG, programming card is a must to re-assign channels,
I mainly use these for wings, only 1 JR plug and then bolt on the wing. The wires are of good size and silicone coated for power transmission.Point to note use 6 volts and don't use thin extension leads or these have there own mini brown outs.
Excellent product - Takes Sbus signal and turns it into analog signal so you can use cheap/normal servos on the Sbus systemThis S.Bus decoder works perfectly with non S.Bus Servos and it is very easy to use with the progamming card.
4 kanalen per kabel, onbeperkt uit te breidenThis works perfectly with the Futaba R7008SB. You don't have to plug it into the rx to program it, just a 4.8v battery in the slot marked for the Sbus rx and then press the buttons. It actually gives the ability to program DG1 and DG2 channels plus the normal 16 which makes it better than the Futaba original!! Very impressed all round and the soldering is of a high standard so should be reliable.great item, with T8fg Futaba and R6208SB you can setup it as you want. mooore cheap than original futaba decoder! thank yoi hk!The S-Bus decoders work fantastic!
I did just built a Lunak 1:2.5 in full RFG with 5.8 m wingspan. The Lunak has 5 Servos in each wing (14 servos in total) The S-Bus decoders were programmed and then installed in each wing. So I have only one cable coming out of each wing!!!!
And yes, the decoders also work with the Futaba RX's e.g the new R6308SBT for FASST telemetry.
So five stars for these decoders!
Juergen -
Upload
Videos -
Upload
Files