SCRATCH/DENT - KINGKONG HEX 300 FPV (PnP) (Red)

No Fuss Return. As new condition.

Warranty:
No warranty available for this item.
Please do not ask questions as the item will be sold out within 24hrs.
No backorders allowed.

Scratch & Dent items are sold as-is. What you see in the photo is what you will get.
Because HobbyKing loses money on each Scratch/Dent item sold we cannot offer warranty or answer questions on these products.

Item will be deactivated once a 0 stock level is reached.

Please see product KINGKONG HEX 300 FPV Plug and Play (Red) for more details.

The KINGKONG team have done it again. Using their sharp and distinctive looking Hex 300 frame they have added a great package of gear to make an excellent Plug and Play package complete with FPV camera and Video TX.

The kit has everything you need from a pre tuned mini CC3D flight controller to down to the Spironet Antenna. 

The motors are KINGKONG 1806-2280KV (CW and CCW) powered by KINGKONG 12A OPTO BLHeli ESC’s. With a UBEC (5v 3A) power to the PDB. 5040 Propellers will give you that unique HEX sound.

There is a preinstalled FPV camera and video TX so just tune in the channel and get flying. The FPV camera is angled so you see where you are going when the race is on.

Just to ensure that your competitors know where you are there is super bright LED strip at the rear as this will be the only part they will see. 

This exciting packing not only looks the part but will give you hours of racing enjoyment at the right price.

Features:
• Fully molded unibody glass fiber reinforced chassis
• KINGKONG 1806-2280KV Motors (CW and CCW)
• KINGKONG 12A 2-4S OPTO BLHeli ESC’s
• KINGKONG 5V-3A UBEC
• Power and Video distribution board with XT60
• Mini CC3D Flight Controller
• 5040 Propellers (CW and CCW)
• FPV Camera 1000TVL CMOS
• 200mW 5.8GHz Audio/Video Transmitter
• 5.8GHz Circular Polarized Spironet Antenna
• Action camera mount
• Super bright LED module (Make sure your competition knows it's you over taking them!)

Frame Specs:
Wheelbase: 300mm
Weight: 179g (bare frame)
Material: Nylon+Fiber

Motor Specs:
KV(RPM/V): 2280KV
Voltage: 7.4-14.8V (2-4S LiPoly)
Max Thrust: 290g
Number of Poles: 12N/14P
Propeller: 5”

ESC Specs:
Input Voltage: 7.4-14.8V (2-4S LiPoly)
Constant: 12 Amps
Burst: 20 Amps (5sec max.)
BEC: No BEC, OPTO only

UBEC Specs:
Input Voltage: 6V~28V/DC (2-4S LiPoly)
Output Voltage: 5V
Ripple: Constant: 3 Amps
Camera Specs:

Format: PAL
TVL: 1000
Sensor: CMOS
Lens Type: F2.0/2.8mm (IR-CUT)
Input Voltage: 5 ~ 12V DC
View Angle: 120deg

Video TX Specs:
Modulate: Wideband FM Modulate
Video Format: NTSC/PAL
Output Impedance: 50 Ohm
Output Power: 23~24dBm
Channel: 32CH
Operating Voltage: 7V~24V
Supply Current: 190mA
Operating Temperature: -10~85 
Video Band Width : 0~8.0 MHz
Audio Carrier Frequency: 6.5MHz
Video Input Level: 0.8~1.2 Vp-p
Video Input Impedance: 75 Ohm
Audio Input Level: 0.5~2.0 Vp-p
Audio Input Impedance: 10K Ohm
Connector: RP-SMA
Dimension: 40mm x 23mm x 8mm
Weight: 10g (without antenna)

Required:
5-6 Channel RX/TX
1300-2200mah 11.1V ;1000-1800mah 14.8V