SCRATCH/DENT - Sonic FX EPO 1000mm Flying Wing (PNF) E1142 (UK Warehouse)

This little wing was found to have a damaged canopy hatch when checked over so has found it's way here.
In all honesty this isn't anything that can't be repaired in a couple of minutes, but being keen to uphold Hobbyking's reputation for quality, we couldn't sell it as-is.
Grab yourself a bargain now! 

The Sonic FX is an impressive 1000mm flying wing made from ultra-tough EPO foam. The FX offers you all of the performance of its bigger siblings in the Sonic range in an easy to transport size and being Plug and Fly, the Sonic FX will have you in the air in no time.

Practicality was the keynote when designing this airframe and this can be seen right through the model. From the one-piece design to the molded hatch catch for positive locking, the ample cooling vents, pre-fitted XT60 connector and molded hand-hold for launching, the Sonic FX is designed to make life easy!

The state-of-the-art airframe with its low profile twin fins and leading edge strakes not only performs like a pedigree, but looks the part too in its striking hi-viz color scheme.

A pre-installed 2212 2280kv brushless outrunner gives plenty of power for any maneuvers you care to think of with this 3 channel model while letting you push the flight envelope to the limits of high and low speed flight. The glide won't disappoint you either.

All in, the Sonic FX is a fantastic all round fun model with a performance only limited by your imagination (did somebody mention FPV?)

Features:
• Ultra-tough EPO foam construction
• Large cooling holes for the battery compartment
• Pre-installed brushless power system and servos
• Fast, agile and aerobatic
• High-viz color scheme

Specs:
Wingspan: 1000mm
Length: 532mm
Propeller: 6 x 4
Motor: 2212 - 2280kv Brushless outrunner
ESC: 40A w/BEC & XT60 connector
Battery: 3S 11.1V 2000~2500mAh LiPoly
Servos: 9g x 2
Flying Weight: 530~550g

Included:
Sonic FX EPO 1000mm Flying Wing
Hardware (installed)
Manual

Required:
4 Channel TX/RX with elevon mixing
Adhesive
2000~2500mAh 3S (11.1V) LiPoly battery

Warranty:
No warranty available for this item.
Item used as a display item only.
Please do not ask questions as the item will be sold out within 24hrs.
No backorders allowed.

Scratch & Dent items are sold as-is. What you see in the photo is what you will get.
Because HobbyKing loses money on each Scratch/Dent item sold we cannot offer warranty or answer questions on these products.

Item will be deactivated once a 0 stock level is reached.

For full details please see PRODUCT ID: 9095000118-0