New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Skymaster V2 Plug and Fly Aereo Trainer Balsa / Ply 1.005 millimetri (PNF)

Skymaster V2 Plug and Fly Aereo Trainer Balsa / Ply 1.005 millimetri (PNF)

Discontinued Product

Please continue searching for a similar product.
SKU:
9126000002
WANT FREE SHIPPING? Click here to find out more!

Il Dipartimento Funzione Skymaster è un tradizionale, allenatore pre-ricoperto in balsa con una differenza, essendo spina e volare, quasi tutto il duro lavoro è già stato fatto!

La Skymaster è una configurazione veloce, anche per un novizio, il motore outrunner brushless, ESC e la maggior parte di (tutti tranne servo ala) sono stati pre-installato servo, è sufficiente seguire le istruzioni incluse e sarete in volo in pochissimo tempo!

Essere di costruzione balsa tradizionale, il Skymaster è resistente e facile da riparare - dovrebbe avere un "Oops!" momento o due. Il carro è proprio filo armonico ed è così duro in grado di gestire qualsiasi cosa fino a 4 ruote "leggeri anche per il più brutto di aeroporti!

La Skymaster ha un sacco di potenza e maniglie superbamente, così bene che una volta che un nuovo pilota è riuscito a fare i conti con le nozioni di base, un semplice aumento della superficie di controllo getta e si dispone di un modello sportivo poco brillante per la masterizzazione di manovre acrobatiche di base come loop, gira, gira stallo, volo rovescio e molto altro ancora!

La Skymaster è un modello di volo fantastico con quel certo "qualcosa" che solo i modelli di balsa in grado di offrire, divertente e difficile con grandi prestazioni, questo è l'ideale per tutte le stagioni sia per la pista di atterraggio club o per parkflying!

Nota: Questa è la versione aggiornata (Skymaster V2) con grandi ruote / pneumatici per semplici ROG decolli su erba e un portello della batteria magnetico rimovibile nel naso per facilitare batteria swap senza rimuovere l'ala.

Caratteristiche:
• Tradizionale balsa di costruzione con il duro telonati fusoliera
• Costruire Fast Time
• Nuovo Large Size 3.5 "pneumatici di gomma
• Nuovo coperchio della batteria magnetico rimovibile
• Resistente Piano Wire Carro
• Eccellente movimentazione terra
• Controllo Channel Four completa
• Acrobazia Capace
• Un sacco di alimentazione dalla Pre-Equipaggiata Brushless Outrunner Motor
• Sapientemente applicato Copertura con eccellente Schema orientamento
• Plug and Fly - Basta aggiungere Ricevitore & Lipoly (non incluso) e Fly!

Specifiche:
Apertura alare: 1.005 millimetri
Lunghezza: 750 millimetri
Volare Peso: 500g
Servo: 9g x 3
Motore: 2822 Brushless Outrunner 1200KV
ESC: 30A w / BEC

include:
Tutte le periferiche, Prop Saver & Prop
istruzione
decalcomanie

Richiede:
Il proprio 4 trasmettitore e ricevitore Canale
1300mAh 3s Lipoly Batteria

  • SKU 9126000002
  • Brand -
  • Capacità ( mAh ) -
  • Peso 1627.0000
  • Lunghezza 780.00
  • Packaging Width 150.00
  • Altezza 190.00
  • Skymaster V2 Plug and Fly Trainer Airplane Balsa/Ply 1005mm
  • HK SkyMaster V2
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I am at the building stage and will update once completed. Price is very reasonable but quality isn't up to my usual hobby king expected standard. there are random debris lodged (almost like rough basla shavings/chips) under some of the covering between the structural rib and cover. You can visually see it immediately and its rough to the touch. Also the ailerons are hastily glued and you can see some excess between aileron and wing. Also the Rods that come out of the wing that control ailerons (Both sides) can only force the ailerons to go down. Can't go up. It is as if they created that channel for the rods to move only from center to one direction only. As in I had to carve out extra room for the rods to move in the opposite direction so the ailerons could move in both up and down direction. Also the motor... I haven't diagnosed it yet or powered it but it makes a very bizarre ringing/bell sound when i manually rotate it. Almost as if something is loose inside. Also the stabilizer is VERY weak and same goes for rudder. I'm wondering if i should fortify it before gluing them on. It is not perfect or without faults but is isn't anything you can fix so it only increases build time a little and a slight annoyance.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am at the building stage and will update once completed. Price is very reasonable but quality isn't up to my usual hobby king expected standard. there are random debris lodged (almost like rough basla shavings/chips) under some of the covering between the structural rib and cover. You can visually see it immediately and its rough to the touch. Also the ailerons are hastily glued and you can see some excess between aileron and wing. Also the Rods that come out of the wing that control ailerons (Both sides) can only force the ailerons to go down. Can't go up. It is as if they created that channel for the rods to move only from center to one direction only. As in I had to carve out extra room for the rods to move in the opposite direction so the ailerons could move in both up and down direction. Also the motor... I haven't diagnosed it yet or powered it but it makes a very bizarre ringing/bell sound when i manually rotate it. Almost as if something is loose inside. Also the stabilizer is VERY weak and same goes for rudder. I'm wondering if i should fortify it before gluing them on. It is not perfect or without faults but is isn't anything you can fix so it only increases build time a little and a slight annoyance.

Arrived with a broken fuselage, I returned the model and received a full refund apart from the return shipping fees which I thought was a bit unfair considering the damage was not my fault. Nearly 20 out of pocket as I live outside of the U.K.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Arrived with a broken fuselage, I returned the model and received a full refund apart from the return shipping fees which I thought was a bit unfair considering the damage was not my fault. Nearly 20 out of pocket as I live outside of the U.K.

Fantastic model. Fun to build and an excellent flyer. will perform most aerobatics and very stable. just add 25g of weight to the nose and a 3S 1300 and its good to go

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fantastic model. Fun to build and an excellent flyer. will perform most aerobatics and very stable. just add 25g of weight to the nose and a 3S 1300 and its good to go

Nice plane! Just got mine a couple days ago and the coat is perfect. Everything goes together real well and I haven't noticed anything amiss as far as how it was built. The directions are HORRIBLE!! In particular, be careful assembling the tail feathers as there is a sequence to it that is not addressed in the manual. Control horns, tail wheel and the control surfaces all need to be sorted before you apply glue. Read through the directions and then throw them away. That said, I love it. Ive moved to bigger and bigger planes over the years and am happy to be excited about a small one again!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice plane! Just got mine a couple days ago and the coat is perfect. Everything goes together real well and I haven't noticed anything amiss as far as how it was built. The directions are HORRIBLE!! In particular, be careful assembling the tail feathers as there is a sequence to it that is not addressed in the manual. Control horns, tail wheel and the control surfaces all need to be sorted before you apply glue. Read through the directions and then throw them away. That said, I love it. Ive moved to bigger and bigger planes over the years and am happy to be excited about a small one again!

Awesome little plane all around! I like it so much I ordered a second just to keep around. I decided to drop in a different power system and servos (HK SCM9-5v servos and NTM 2826 1000kv motor) Balances perfect with a 2200mah 3s and draws ~7 amps at cruise throttle with an 8x6 APC prop. I also added an orange 3 axis stabiliser which lets me fly in 5-7 kts of wind. Definitely not a windy day flyer without a stabiliser though. Makes an awesome FPV plane and has plenty of lift for more weight. Watch the wing joint, aileron throws and landing gear mounts. Wing joint needed some minor work to line up properly and one aileron wouldnt travel as far up as the other, both were easy to fix though. Landing gear mount blocks are not very well set and need to be epoxied to hold up more than a weekend or two, once again an easy fix. control surfaces only need about 8mm of total throw for a pretty responsive model.
4 crowns on quality because of the weak landing gear job.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Awesome little plane all around! I like it so much I ordered a second just to keep around. I decided to drop in a different power system and servos (HK SCM9-5v servos and NTM 2826 1000kv motor) Balances perfect with a 2200mah 3s and draws ~7 amps at cruise throttle with an 8x6 APC prop. I also added an orange 3 axis stabiliser which lets me fly in 5-7 kts of wind. Definitely not a windy day flyer without a stabiliser though. Makes an awesome FPV plane and has plenty of lift for more weight. Watch the wing joint, aileron throws and landing gear mounts. Wing joint needed some minor work to line up properly and one aileron wouldnt travel as far up as the other, both were easy to fix though. Landing gear mount blocks are not very well set and need to be epoxied to hold up more than a weekend or two, once again an easy fix. control surfaces only need about 8mm of total throw for a pretty responsive model.
4 crowns on quality because of the weak landing gear job.

THIS PLANE IS AWSOME IT CAME WITH REAL RUBBER TIRES ITS THE BEST PLANE IF YOU LIKE TO PRACTICE YOUR NEW MANUVERS WITH BEFOR YOU USE YOU $2000.00 PLANE IM BUYING MORE BEFORE THERE ALL GONE THANKYOU HOBBY KING 11111

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

THIS PLANE IS AWSOME IT CAME WITH REAL RUBBER TIRES ITS THE BEST PLANE IF YOU LIKE TO PRACTICE YOUR NEW MANUVERS WITH BEFOR YOU USE YOU $2000.00 PLANE IM BUYING MORE BEFORE THERE ALL GONE THANKYOU HOBBY KING 11111

great little kit for every day flying, needs some extra work on the ailerons as the wood blocks a bit the movement but after that you have a great value for money!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great little kit for every day flying, needs some extra work on the ailerons as the wood blocks a bit the movement but after that you have a great value for money!

Wow, what a great plane! I bought this as my first plane, and I am amazed by the quality! You guys did a really good job of putting this plane together at a reasonable price. Everything works as advertised, and the plane flies really well. The big wheels enable me to take off almost anywhere! This is a great feature, since not everyone has access to a nicely mowed flying field. I was considering cutting into the wing and adding another servo to enable flaperons, but the big wheels provide enough drag to slow the plane down for a safe landing. The only reason I might not recommend this plane to a beginner is because it is a balsa plane. I nosed it in after trying some stunts, and it took at least 15 hours of my time to fix (fuselage needed gluing, wings needed some major work), as well as having to buy new covering film and an iron. A foamy would have taken very little time at all to fix. Considering the repair cost and time, I would recommend this plane to a more experienced flyer looking for a slower more docile plane to fly. Now that I have purchased and flown some more challenging planes, I will be using this plane to teach my friends how to fly. I highly recommend this plane. Even if you are a beginner, if you have the know-how and resources to fix a nosed in plane, this is a great plane to learn on.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Wow, what a great plane! I bought this as my first plane, and I am amazed by the quality! You guys did a really good job of putting this plane together at a reasonable price. Everything works as advertised, and the plane flies really well. The big wheels enable me to take off almost anywhere! This is a great feature, since not everyone has access to a nicely mowed flying field. I was considering cutting into the wing and adding another servo to enable flaperons, but the big wheels provide enough drag to slow the plane down for a safe landing. The only reason I might not recommend this plane to a beginner is because it is a balsa plane. I nosed it in after trying some stunts, and it took at least 15 hours of my time to fix (fuselage needed gluing, wings needed some major work), as well as having to buy new covering film and an iron. A foamy would have taken very little time at all to fix. Considering the repair cost and time, I would recommend this plane to a more experienced flyer looking for a slower more docile plane to fly. Now that I have purchased and flown some more challenging planes, I will be using this plane to teach my friends how to fly. I highly recommend this plane. Even if you are a beginner, if you have the know-how and resources to fix a nosed in plane, this is a great plane to learn on.

Its a very good airplane for someone who doesn't want to spend allot of money to get into the sport. Things that I would recommend doing before you fly are reinforce the landing gear gussets inside the fuselage they tend to break on a less then perfect landing. Also remove the small Allen head screws that hold the motor into the mount and secure them with loctite. Mine vibrated loose and I almost lost the motor. Also the hatch that covers the battery compartment will not stay in place with just the magnets that are there. I simply wrap a rubber band around the front end and its fine. I suppose you could install some kind of a latch system if you want it to look OK. Buy yourself an extra battery or two the flight time is about 6-7 minutes per battery. By all means have someone with expierience with you the first few times. This plane is very quick to respond to pilot input and you need to practice. A simulator will pay big dividends in the form of less crashes.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Its a very good airplane for someone who doesn't want to spend allot of money to get into the sport. Things that I would recommend doing before you fly are reinforce the landing gear gussets inside the fuselage they tend to break on a less then perfect landing. Also remove the small Allen head screws that hold the motor into the mount and secure them with loctite. Mine vibrated loose and I almost lost the motor. Also the hatch that covers the battery compartment will not stay in place with just the magnets that are there. I simply wrap a rubber band around the front end and its fine. I suppose you could install some kind of a latch system if you want it to look OK. Buy yourself an extra battery or two the flight time is about 6-7 minutes per battery. By all means have someone with expierience with you the first few times. This plane is very quick to respond to pilot input and you need to practice. A simulator will pay big dividends in the form of less crashes.

This is my first balsa model and fly's like a dream. Had to use a file on some parts as they would not fit,other than that it is a simple build and fun to fly..

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This is my first balsa model and fly's like a dream. Had to use a file on some parts as they would not fit,other than that it is a simple build and fun to fly..

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
CG etc Download [22]
CG etc Download [22]
CG etc Download [22]
No File Name Download [57]
335300078X93607X25.JPG Download [56]
335300078X93607X43.JPG Download [71]
335300078X93607X56.JPG Download [77]
335300078X93607X11.JPG Download [58]
335300078X93607X26.JPG Download [116]
No File Name Download [202]
  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save