Sonico 185 EP Glider 1850mmn (PNF)

• Overall
• Quality
• Value

Customer Rated

Feb 09, 2013

Mine arrived last week. Went together well. The box that the bird came in was a Rtf box and showed a 2200 mah 3 s. way to heavy. I used a 1800mah 3 s and added 3 large washers to the base of the rudder, one fitted to a slot cut in the tail skid. The other two are just stuck to the side of the tail. On the maiden I gave it full throttle and let it go vertical, no issues reaching a good altitude. I also covered the bottom of the fuselage with "glass repair tape", that's what it's called in Bunnings. This keeps the bottom of the fuse from getting all crappy. The wing flutter is a little scary, just watch your speed and all is good. Over all I think this bird is good value.

• Overall
• Quality
• Value

Customer Rated

Oct 25, 2012

This is my first plane and due to my inexperience it has taken some serious abuse but it repairs up really well. All the servos seem to be pretty tough I did strip one by glueing the rudder wire whilst repairing a break in the tail. It works really well as a glider but is very agile an acrobatic lots of fun. I am running a smaller prop and am using a 1300 3s battery instead of the 1800 2s recommended and I find it works real well and I can glide around for ages if I want to. It also seems to balance out a lot better too.
Big thumbs up have really enjoyed this plane. Would like to have one that I haven't beat up so much though

• Overall
• Quality
• Value

Customer Rated

Feb 17, 2012

The usual good service from Sydney. Very nose heavy, even with recommended 2 cell 1800 battery . Elevator pushrod binds so servo doesnt centre well. Solution : put elevator servo in rudder with direct pushrod to elevator...easy to route the cable in the foam. Flies well on 2 cell battery with sufficient power to get up to the thermals so no need for a 3 cell. None of the reported flutter in my plane. Overall a happy camper. Looking forwards to flying it on the slope