Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Spacewalker 1580mm Laser Cut Balsa for Electric/IC Power (Kit)

Generating Links

Spacewalker 1580mm Laser Cut Balsa for Electric/IC Power (Kit)

Prezzo:

Now save risparmia 0,00 € 0,00 €

108,23 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9099000083-0
Spedizione gratuita? Clicca qui per saperne di più!

Designed by Jesse Anglin of Hendersonville, North Carolina, the single-seat Spacewalker captures the classic lines of what many consider to be aviation's 'Golden Age' - the 1930's. With its modern construction and powered by a 65 hp Continental flat-four engine the aircraft first flew in 1986.
The Spacewalker, with its fabric covered wooden wings, welded steel tube fuselage and wire braced tail unit the Spacewalker continues to appeal to home-builders everywhere.


Our Spacewalker is 1580mm span, making it approximately 1:5 scale and is a laser cut balsa kit for modellers that enjoy crafting their models the traditional way, savouring the time taken to build a model from a kit, but with the bonus of having had all of the balsa and plywood parts intricately laser cut for you.

 

A few modern touches have been incorporated into this kit to make life easier and make a stronger model, such as a fiberglass cowl and wheel pants to give maximum strength and durability as well as allowing you to get the model into the air quickly.
A comprehensive hardware pack is included, as is a welded wire undercarriage, scale sized wheels, sprung tail wheel and aluminum control horns.

 

The interlocking nature of the kit parts dispense with the need for a plan and require only a flat building board to produce a straight and true airframe.
Basic, 4 channel radio is all that is required to fly the Spacewalker which, like its full-sized counterpart is a pure pleasure to fly.

 

Power requirements for the model are quite modest, a 3548 900kv outrunner turning a 10" propeller will be more than adequate on a 3 ~ 4 cell LiPoly pack. Alternatively, the model can be built for IC power using a 0.40 ~ 0.50 (6.5 ~ 8cc) class nitro engine glow or gas engine mounted within the cowling.

 

Why not give building-your-own a try with this hassle-free quick building kit that captures the spirit of 'Golden Era' aviation with the simplicity of modern design?

 


Features:
• Accurate scale design
• Laser-cut parts
• Welded steel undercarriage
• Fiberglass cowl & wheel pants
• Scale dummy engine moldings
• Full accessory pack
• Comprehensive manual

 

Specs:
Wingspan: 1580mm
Length: 1050mm
Wing area: 43dm2 (645sq in)
Flying weight: approx. 2kg
Wing loading: 46g/dm2 (14~17 Oz/ft2)

 

Suggested equipment:
Motor: 3548 900kv
ESC: 50A~80A
Servo: 4 ~ 5 x standard servos
Prop: 10inch
Battery: 3 ~ 4S 2200mAh-4000mAh
Radio: 4Ch

 

 

Required to complete:
Adhesives
Covering material
Pilot figure
10" prop

  • Apertura alare ( mm ) 1580.00
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

sparhy | Acquirente verificato

  • Overall
  • Quality
  • Value

not for beginer

Jan 25, 2021

parts missing, parts not clearly marked need to make some parts,

Ace | Acquirente verificato

  • Overall
  • Quality
  • Value

Spacewaker

Jan 18, 2021

Could have a little more instruction.

jan | Acquirente verificato

  • Overall
  • Quality
  • Value

it went where it belongs

Jan 12, 2021

yes it went where it belongs.... in the trash bin.
horribke to build, nothing fits well, i am building for over 25 years so i know whats going on... folks, dont buy this!

jan | Acquirente verificato

  • Overall
  • Quality
  • Value

very bad, dont buy this

Jan 12, 2021

no 100% drawing, bad manual very cheap quality, dont buy this.... very dissapointed in this product

Graham | Acquirente verificato

  • Overall
  • Quality
  • Value

Better than expected

Nov 30, 2020

Laser cutting is good and all parts were present,even some you never find a place for!
So I am used to Building on a plan this being a first for 3D jigsaws.
BEWARE the fuselage has built in right thrust so the left and right hand side are different but have the same part numbers . Now DON'T build two left hand wings build one then concentrate is it left or right ?
The ailerons are too complicated so I manufactured my own from sheet balsa.
The flying weight will be,and this is electric 2.6KG
For power I fitted a 5045 720KV on 4 cells with a 14x7 prop giving 600W and 2.4kg of static thrust .
Finally it was nose heavy! perhaps a 4255 would be lighter? and that's with with no lead, moving the battery back helped but tail weight was needed I went for C of G on the spar so a little conservative so moving C of G further back as recommended would need even more tail weight or battery moving back more than space allows .How does it fly NO IDEA just completed so everything crossed!

Klaus | Acquirente verificato

  • Overall
  • Quality
  • Value

Schöner Baukasten und Modell

Jan 29, 2020

Leider fehlten 3 Balsambretter.
Für Modellbauanfänger ist das Modell jedoch nicht geeignet.
Die Anleitung könnte ausführlicher sein.

Russ | Acquirente verificato

  • Overall
  • Quality
  • Value

Great Kit, not so great instructions, kit was missing some parts

Jan 15, 2020

I mistakenly built two right wings with my first kit that I have had for a while, so i purchased a second kit to complete the project. Unfortunately it was missing some parts., so I bought a third kit figuring I would return the second . It too was missing the same parts. So I returned one kit and made the missing parts my self from sheet balsa.
Missing parts aside the kit is high quality but the instructions are not very thorough, parts are miss labeled in the instructions and when you are done there are many parts that go unused adding to the confusion.
My first plane is done and it came out great. Since i have two kits I am about to start the second one. I have purchase several other kits from HobbyKing and they all are vry high quality.

Henryk | Acquirente verificato

  • Overall
  • Quality
  • Value

Pretty good model if you don't require directions, accurate plans and missing parts.

Jan 04, 2020

Second review, HK didn't post my first one.
Not recommended for a beginner as this model is challenging
I'm in the process of building this model and as others have stated;
1. Instructions are minimal and inaccurate as parts are mislabeled so be careful before you glue.
2. Quality of the wood is good as is the laser cutting (with minor exceptions)
3. Purchase 2.5mm (1/16) balsa sheets as I have at least 20 missing parts, be prepared to make your own. Very frustrating!
4. Left over parts that aren't referenced or seem to go with this model add to confusion.
Read others posts referencing build logs on "flitetest.com", was of great help.

kmurch | Acquirente verificato

  • Overall
  • Quality
  • Value

Challenging

Dec 29, 2019

Some miss-match between parts and instructions makes construction challenging. Noted that some pairs of parts don't match exactly. Better suited to electric than ic motor.

Milan | Acquirente verificato

  • Overall
  • Quality
  • Value

missing parts

Dec 16, 2019

more than 10 missing parts

  1. 1
  2. 2
  3. 3
File dei clienti
Manual Download [2]
IMG_8985_1.jpg Download [1]
P9170022.jpg Download [3]
spacewalker leidbeiningar.pdf Download [1]
My version of Spacewalker from this kit Download [3]
C:\Users\trost\Pictures\Space Wa;ker Download [248]
Spacewalker LG.jpg Download [203]
Space Walker.jpg Download [248]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Related Tags

Accessori