New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Spedix in fibra di carbonio S250AQ CC3D PPB del motore ESC Eliche (ARF)

Spedix in fibra di carbonio S250AQ CC3D PPB del motore ESC Eliche (ARF)

Discontinued Product

Please continue searching for a similar product.
SKU:
647000010-0
WANT FREE SHIPPING? Click here to find out more!

Spedix in fibra di carbonio S250AQ CC3D PPB del motore ESC Eliche (ARF)

Sei feed-up con la costruzione e alla ricerca di un grande valore di 250 quadcopter che non ha bisogno edificio? Poi il Spedix S250AQ è la quadcopter per voi. Esso viene fornito con tutte le grandi caratteristiche, tra cui i motori già installati Sunnsky, regolatori di velocità Spedix, controllore di volo CC3D e Spedix PPB tutto su un telaio Spedix di alta qualità.

Il controller CC3D Flight fornisce una sensazione di incisività quando si fa volo estremo. I Spedix ESC'S sono balenò con il programma SimonK per una risposta rapida, della valvola a farfalla liscia, bassa temperatura di esercizio. Sono inoltre dotate di un LED rosso o verde brillante di per rendere più facile per determinare l'orientamento del Multirotor. I motori Sunnsky vi darà una grande svolta della velocità.

La fibra di puro carbonio di alta qualità e la costruzione ad alta resistenza ABS telaio in resina migliora sia la maneggevolezza e resistenza agli urti. Il peso leggero aiuta con la gestione alzarsi e andare e agile.

Il Spedix S250AQ viene fornito completo di un set completo di oggetti di scena, adattatori dell'elica e tutte le rifiniture di pregio.

Caratteristiche:
• Potenti motori 2300KV Sunnysky 2204
• Sistema di controllo di volo CC3D pre-tuned
• CES programma rotonda 12A SimonK
• Scheda di distribuzione dell'alimentazione (con connettore XT60)
• Balenato con il programma SimonK, risposta rapida, della valvola a farfalla liscia
• Ha un luci luminose del LED per indicare l'orientamento di una Multirotor
• fibra di carbonio puro e ad alta resistenza costruzione in resina ABS

Spec kit telaio:
Materiali: fibra di carbonio e resina ABS ad alta resistenza
Passo: 280 millimetri
Dimensioni: 260x210x90mm
Peso telaio: 143g

Specifiche motore:
Nome dell'articolo: Sunnysky motore brushless 2204 2300KV
Altezza: 28mm (in cima dell'albero)
Larghezza: 27mm
Peso: 21g
Batteria: 2-3S Lipoly
RPM: 2300KV

Di distribuzione SPECIFICHE TAVOLA:
Ingresso: 3-4s Lipoly
Uscita: 5V @ 3A e 12V @ 3A
Dimensioni: 50x50x5.5mm
Peso: 22,5 g (includere piastra di alluminio)

Volo Spec controllore:
Tipo: CC3D
Tensione in ingresso: 4.8-6.0V
Dimensioni: 39x39x12mm
Peso: 14g

ESC Specifiche:
Nome dell'articolo: Rotondo 12A ESC
Tensione in ingresso: 2-4S batteria LiPoly
Corrente continua: 12A (max 18A @ 10S)
Dimensioni: Φ23x5.5mm (escludere condensatore)
Peso: 13.5g
Firmware: SimonK

Incluso:
kit telaio 1 x S250AQ
1 x controllore di volo CC3D
motore brushless 4 x 2204 2300kv
2 x rotonda 12A SimonK programma ESC con LED rosso
2 x rotonda 12A SimonK programma ESC con LED verde
1 x Scheda di distribuzione dell'alimentazione (con connettore XT60)
2 x 5045 elica cw
elica 2 x 5045 ccw
1 x Standoff Set per la scheda di controllo e distribuzione di energia
Cinghia 1 x Batteria

richiesto:
batteria 1300-2200mah 3S LiPoly
5-6 canali TX / RX

  • SKU 647000010-0
  • Brand Spedix
  • Capacità ( mAh ) -
  • Peso 600.0000
  • Lunghezza 240.00
  • Packaging Width 55.00
  • Altezza 164.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

As other reviews have addressed, the screws are horrible. I could only use about half of them as the other half were stripped out straight out of the box(the supposed 1.5mm head). Luckily I had some from another spedix I could use to complete the build. While setting up the quad in openpilot, one motor or esc is bad(again straight out of the box). Three spin nicely while one just clicks. I have spares but cannot check because I cant get screws off now(due to being stripped). I am stuck with a $100 paper weight right now. I cannot recommend Hobby King due to their zero quality control...there's a reason they're cheaper.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

As other reviews have addressed, the screws are horrible. I could only use about half of them as the other half were stripped out straight out of the box(the supposed 1.5mm head). Luckily I had some from another spedix I could use to complete the build. While setting up the quad in openpilot, one motor or esc is bad(again straight out of the box). Three spin nicely while one just clicks. I have spares but cannot check because I cant get screws off now(due to being stripped). I am stuck with a $100 paper weight right now. I cannot recommend Hobby King due to their zero quality control...there's a reason they're cheaper.

Great quad, easy to build, setup and fly. I had to replace some of the hardware due to the sloppy tolerances. CC3D is a custom version and has dedicated SBUS port (nice). Use Librepilot (new supported project), not Openpilot (not supported anymore). Replacement parts are inexpensive. Quad flies with enough power on 3S for sport flying, have not tried 4S yet. My only complaint is the somewhat cramped area for mounting battery, video Tx and vid antenna, compared to other FPV 250 quads. Overall a great quad for the money.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great quad, easy to build, setup and fly. I had to replace some of the hardware due to the sloppy tolerances. CC3D is a custom version and has dedicated SBUS port (nice). Use Librepilot (new supported project), not Openpilot (not supported anymore). Replacement parts are inexpensive. Quad flies with enough power on 3S for sport flying, have not tried 4S yet. My only complaint is the somewhat cramped area for mounting battery, video Tx and vid antenna, compared to other FPV 250 quads. Overall a great quad for the money.

Ok, So this quad seemed like a good deal, and I still think it was. It has more performance than I expected (this is my first 250 size), and it shocked me a bit on first flight (4s). I would not suggest it as a first quad, but i would suggest it as a step up for someone.

As for quality and design, the hidden esc's and wiring are nice and works, the frame plate seem tough. The fixing hardware(screws) are not the best, the hex heads can round/wear easily if tightened much, I replaced them all. The arms while plastic seem strong(I've hit some....trees, ground, my car......), and the spare parts are cheap. The included pdb is nice if a little heavy, but it makes assembly very easy.

The included cc3d works well, even If I'm a total noob with it....The esc's seem to be good, motors and esc are not really even warm after a few 2200mah packs, flying in 35c to 38c temps too.

Overall I like this quad.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ok, So this quad seemed like a good deal, and I still think it was. It has more performance than I expected (this is my first 250 size), and it shocked me a bit on first flight (4s). I would not suggest it as a first quad, but i would suggest it as a step up for someone.

As for quality and design, the hidden esc's and wiring are nice and works, the frame plate seem tough. The fixing hardware(screws) are not the best, the hex heads can round/wear easily if tightened much, I replaced them all. The arms while plastic seem strong(I've hit some....trees, ground, my car......), and the spare parts are cheap. The included pdb is nice if a little heavy, but it makes assembly very easy.

The included cc3d works well, even If I'm a total noob with it....The esc's seem to be good, motors and esc are not really even warm after a few 2200mah packs, flying in 35c to 38c temps too.

Overall I like this quad.

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save