Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

Galleggianti sterzanti per Cessan 182 1,5 metro Idrovolante

Galleggianti sterzanti per Cessan 182 1,5 metro Idrovolante

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
1359 g
SKU:
C-182Floats
Descrizione
prodotto
Galleggianti orientabili per 182 1,5 metro Light Aircraft / Idrovolante


* Nota: Il 182 idrovolante venduto separatamente.
Product
Specifications

Ulteriori informazioni

  • SKU:
    C-182Floats
  • Brand:
    N/A
  • Peso (g)
    1359.00
  • Lunghezza
    890.00
  • Larghezza:
    135.00
  • Altezza:
    230.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Plavky na hydropln , s z kvalitnho tvrdho EPP. Prekvapia svojou mohutnostou plus v dodavke je aj servo na ovldanie kormidla.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hele mooie drijver set, 85cm in lengte gewicht inclusief aluminium stangen 465 gram!!

Perfecte afwerking en goede montage mogelijkheden.

Ga binnenkort onder mijn Bixler 2 proberen, denk wel dat ze aan de grote kan zijn maar is het proberen waard!!



Test results later.



Great job HK!!

verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
These floats are great! Made my EdoModel and suit the EdoModel Cessna that hobbyking sell (although they dont use the brand name). Highly recommend this product, my Cessna seaplane is a whole lot of fun!!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
very large floats made out of foam whit one servo
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
VERY IMPORTANT to seal all the joints with clear tub & tile sealant or equivalent silicone adhesive! These units are NOT WATER-TIGHT as we all would expect. The two halves are loosely joined together by the manufacturer with cheap adhesive. Blowing air through the seams penetrates the floats in between gaps. Otherwise, the construction is good and the hardware is solid but rudder servo is cheap, noisy, and does not center well. I'm using these on a 55" EPO cessna 182 weighing approx. 2 lbs.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
First flight I had trouble getting off the water and when I did I could not keep the plane level. I hit the water and one float broke from the mount. The plastic that attaches them is not very strong. Anyway I discovered that one of the floats had water inside of it. This is prob why I could not keep the plane from turning. I am guessing the float has a bad seal somewhere so it filled with a little bit of water and I just couldnt keep her level. I have to figure out a way to repair these floats so I can try again now. The servo was also mounted reverse and the push rod is way to flexible. Im not very happy.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Very, very nice floats. Has a servo built into the right float with a piece of plastic glued over it to keep it dry. Also includes an extension Y-cable for plugging into your plane's rudder. The water rudder is very nice and works well and is easily mounted/removed from the float. Tried this on a souped-up Hawk Sky and had to make smaller struts to fit the HS fuse. Couldn't get it off the water, though, the HS was not powerful enough.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
The quality of the floats is nice, every detail is present in the box. I took one star off, because the metallic parts are too thick and heavy. They could be a little lighter.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Hi, can I use it for EPO Giant cessna 182? Or which floats on HK are optimal for this model? Thank you for replay.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
came well packed (double boxed) nicely finished foam includes servo and fittings but no screws or bolts???

will fit to 1.4m cessna with flaps 35 42 ..1250motor 10x6 prop...expect good results
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.