Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Supermarine Spitfire Mk IX 50cc composito 2.250 millimetri Gas (ARF)

Generating Links

Supermarine Spitfire Mk IX 50cc composito 2.250 millimetri Gas (ARF)

Prezzo:

Now save risparmia 0,00 € 0,00 €

445,10 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
SPITFIRE89IN
Spedizione gratuita? Clicca qui per saperne di più!

Di tutti i vari marchi del leggendario Spitfire, il Mk IX è considerata probabilmente la più bella overal in termini del suo equilibrio di agilità, velocità e potenza di fuoco, sviluppato come una risposta al FW190, questa versione iconico della Spitfire è stato uno dei i migliori combattenti della guerra, la Mk IX giocato un ruolo importante nella vincita superiorità aerea degli Alleati e fu così efficace, era ancora in servizio fino alla fine della WW2.

Questo superbamente rifinita Spitfire dispone di una fusoliera e balsa compositi ali, stabilizzatore orizzontale e timone. Questo modello è stato molto ben pensato, la spina 2 pc in ali e stabilizzatore orizzontale rendono il modello molto pratico, sia in termini di gruppo di trasporto e di campo. Un'altra caratteristica pulito è il baldacchino realease rapida che dispone di una cabina di pilotaggio separato, questo non solo consente un facile accesso alla fusoliera, si delinea anche il modellatore la libertà di costruire un interno completo pozzetto scala relativley facilmente. L'hardware di ottima qualità include anche i dettagli della scala, come radiatori, vesciche cannone, albero aerea, copriruota e così via. Questo modello richiede ritrae (non incluso) e abbiamo un appositamente progettato, in scala insieme completo disponibile per questa splendida Spitfire.

Questo modello ha un peso incredibilmente basso di volo a causa di buon design e qualità costruttiva, prestazioni con un motore a gas 50cc montato sarà sorprendente, grande, scala 300ft loop e così via saranno all'ordine del giorno, il Spit si presta anche una conversione pratico energia elettrica come le batterie possono essere raggiunti facilmente. Non c'è dubbio, questa bella Spit è un incredibile modello in scala gigante, infatti, con un po 'di lavoro, sarebbe super-scala / spettacolo di serie, ma a un prezzo che lo rende accessibile a molti fan warbird, la vista di questo Spitfire " battere "il vostro campo del club vi farà l'invidia di voi colleghi piloti!

Specifiche:
Apertura alare: 2.250 millimetri
Lunghezza: 1.894 millimetri
Ala Area: 86.5dm2
Peso di volo: 8000G

Richiede:
7 ~ 8 canali TX / RX
servo dimensioni 9 x MG High Torque standard
50cc motore a gas (o equivalente elettrico)
RX Batteria
121 millimetri Spinner
ruotino di coda
carrello retrattile

  • Supermarine Spitfire MK IX
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

MaximusInfidelis | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Oct 14, 2014

Love this plane, flies great, it has amazing slow flight characteristics. With 4 1/2lbs of steel in the nose to balance mine came out at 25lbs. C of G is 5.5 inches back. I posted a video, click on the video tab. Like many ARFs from China, you have to do some extra work, but it was well worth the extra effort. I've got 21 flights on mine right now and I really look forward to the weekend, gets lots of attention at the field also. I posted my build on RCU in the WARBIRDS section, just search for Hobby King Giant Spitfire. I cover all the mods that need to be done and some others I did because I wanted to. I would buy another one, love it.

systemspecialis | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jul 29, 2014

The model was assembled as per the manual, but with the additional nose weight in the cowl, I had to adapt some very robust mountings attached to the motor box. ( I got this tip from a forum, so thanks for that!)
There have been some concerns over the wing securing tabs. Remember, the wing is supported by the alloy spar tube. The tabs only have to keep the wing on the tube. I had a look around the wing internals, and didn't find anything out of order, maybe a couple of dabs of glue. some of the fittings provided are a bit 'agricultural' but do the job. I remade the wheel doors and under wing radiators in fiberglass, as they will stand up better in the long term. A 216mm spinner in ally can be obtained from Traplet Shop, for 21.00 . The carbon fibre one at 217mm looks a little bit too big. The ally one I can use with my electric starter.
Yes I'd buy another one, especially at the price!

systemspecialis | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jul 29, 2014

The HK retracts need a certain amount of re-engineering to make them work, and cure leaking cylinders etc. However, the ridiculously low price more than makes up for the extra work.
The power plant is a DM55 (sort of 'clone' of other more famous manufacturers:) ) This is a neat fit inside the cowl, with a pitts-type muffler. By twisting the engine on the motor box just a little, it all fits in nicely, with just the tip of the head & spark plug in view. You're going to have to cut some big cooling holes anyway. C/G was set at recommended position, but I also checked using a C/G calculator, which agreed almost exactly.
Maiden flight was performed today at RAF Wyton, and the model took off in a short run. a Left bank was quickly corrected, and the model climbed away. Handling is sensitive on elevator, but soft on ailerons, but yours may be different. This Spitfire is going to be a lot of fun, to shake down into a sweet flier. I have set the flaps up as per full size. I was surprised how good they were, in slowing the model down, and was undershooting, had to open up and 'go round ' again. The third try had it right on the money, for a gentle flare out. There was just enough elevator to hold down the tail, and save the prop. This is normal for a Spit.

systemspecialis | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jul 29, 2014

Having read various reports/reviews, I was beginning to wonder if this model was a bad idea. Having flown many Spitfires of varying sizes over 30 years up to and including a 9 foot quarter scale Spit. Most were built from kits. I was looking for something with enough 'presence' without being so big as to be a bit awkward to transport. I have a large trailer, but sometimes I jut want to pop a model in my MPV, and a Spitfire sized at 88 in span fits the bill.
The 17 pound 'flying weight' is a total lie. Perhaps the manufacturer would like to demonstrate that they have a prototype of this kit flying at this weight. To get the C/G correct needs at least FOUR POUNDS of lead. This was cast into a circular ingot with a centre hole large enough to clear the prop shaft, and bolted at the extreme front inside the cowl. This saves a bit of weight and produces a decent flying weight of 25 pounds. This is still a reasonable weight for a model of this size, so don't be disappointed.

vettster | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Dec 22, 2013

I am currently doing an online build on RCG under Warbirds. This is a very attractive ARF, but like many ARFs it requires many upgrades. The wing bolt attachment have been proven to fail!!! The wing tube is to short and weak. I have upgraded to a CF wing tube. The engine box needs major reinforcement. I spent hours sanding down the wing tube receivers so the wing tube would fit. There is a big gap at the trailing edge on the left wing.
In the end its a very nice model for a good price. but be prepared to do a lot of extra work. Go check my build thread for more details. The best reported CG is 5.5" from the LE.

Dave | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Nov 08, 2013

Hi all!
This Spitfire flies, lands and performs really well! It looks the part, although certainly not 100pcnt scale. It needs about 4.5 pounds of weight in the nose with a DLE 55 gas motor, to balance out at the 6 inch CG. I'd recommend reinforcing the firewall and shimming the landing gear further forward about an inch. A good buy...

Andrew | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

May 19, 2013

left a bad review of this and hobbyking have removed it !!!!!!!!!

Bad news for us all if only good reviews are allowed

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!