New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Obiettivo Drone v1.5 vetroresina FPV dell'aeroplano 1.520 millimetri (ARF)

Obiettivo Drone v1.5 vetroresina FPV dell'aeroplano 1.520 millimetri (ARF)

Shipped From:
  • Global
Discontinued Product

Please continue searching for a similar product.
SKU:
411000001
WANT FREE SHIPPING? Click here to find out more!

Il target Drone è un grande aereo di FPV che è stato specificamente progettato per il lavoro e non solo è il kit a buon mercato per comprare, questo piccolo grande modello è anche a buon mercato per ottenere in aria.

* La nuova versione 1.5 di destinazione Drone ora include una cupola macchina fotografica chiara rimovibile per la parte anteriore della fusoliera. Questo baldacchino magnetica consente l'accesso rapido e facile la vostra macchina fotografica mentre assicura la protezione dagli agenti atmosferici e una vista senza ostacoli!

Il target Drone presenta una fusoliera in fibra di vetro che è aperta frontalmente per montaggio telecamera, c'è anche un costruito in copertura antiriflesso. Il modello è progettato per un motore di spinta come ci si aspetterebbe e dispone anche di un mezzo-montato, grande portello per la batteria e l'accesso attrezzature. L'ampio e aperto zona fusoliera non solo ha abbondanza di spazio per la vostra attrezzatura FPV e LiPoly, fornisce anche un sacco di batteria e raffreddamento ESC dalla fusoliera anteriore aperta. Il sotto vettura è robusto, con vite a gambe in lega nella parte posteriore e una ruota anteriore sterzante davanti.

Il target Drone è un piuttosto veloce accumulo, servo prolunghe sono pre-installato nell'ala balsa, che è montato su un'asta CF e incollato con resina epossidica in posizione. L'hardware in dotazione è completa e le parti complessivi conta bassa, che significa che si sono verificate FPV nel doppio del tempo. Il target Drone, con la sua tailess, spazzato ala è uno dei modelli EP FPV più insoliti e interessanti della sua classe ancora ed è sicuro di ottenere l'attenzione della gente, ovunque si vola!

Caratteristiche:
• * Nuovo Cancella telecamera Dome rimovibile Incluso
• robusta fibra di vetro fusoliera
• Aprire Monte anteriore fotocamera con Anti Glare-Cover
• Ampio Mid-Mounted accesso Hatch
• balsa Costruito Wing & Winglets
• Robusto Sotto Carriage
• orientabile naso-Wheel
Count • parti basse
• Tutto hardware incluso
• Configurazione Pusher

Specifiche:
Apertura alare: 1.520 millimetri
Lunghezza: 500mm
Volare Peso: 500g ~ 700g
Ala Area: 17.2dm2
Carico alare: 29g / dm2 ~ 40.6g / dm2

Richiede:

Tuo 4 ~ 6 canali TX / RX con Elevon miscelazione
28-36 Brushless Outrunner Motor 1800 kv
3 x 9g Servo
30A ESC w / BEC
1300mAh ~ 2200mAh 3s Lipoly Batteria
Attrezzature FPV

  • SKU 411000001
  • Brand -
  • Capacità ( mAh ) -
  • Peso 1715.0000
  • Lunghezza 870.00
  • Packaging Width 160.00
  • Altezza 200.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Good fiberglass plane. But do not forget to glue front wheel mount, if you wish to start not from sling or hands. Have myself one and now i am preparing a sling for take-offs. Plastic camera dome is very thin and will break at first problematic landing. So, have in mind to make another one or have camera with landing protection.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good fiberglass plane. But do not forget to glue front wheel mount, if you wish to start not from sling or hands. Have myself one and now i am preparing a sling for take-offs. Plastic camera dome is very thin and will break at first problematic landing. So, have in mind to make another one or have camera with landing protection.

For $100 shipped, it's not all bad. After reading many forum threads and reviews, I thought it would make a nice FPV plane with a few mods.
Forget the landing gear. I'm mounting a belly pan and wing skids for grass landings. I'll use my JetaPult for launching.
As far as the power system, I'm installing an Electrifly .10 Rimfire motor with a CF folding prop on the back. Don't care if the outrunner motor is on the outside.
The plastic used for the camera pod is useless. Hazy and distorted view looking through it. Better to paint it grey and put the camera on top, or at least cut a hole for the camera to see through the hazy bubble nose. I'll also put some extra CF bracing on the wing joints, to help keep the wing from folding, under stress. I'm also thinking of adding two small v-tail like fins on the back, to add more stability.

Overall, it's built pretty good, with the exception of the camera bubble and landing gear.
If you don't mind making some mods, this CAN be a very good plane.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

For $100 shipped, it's not all bad. After reading many forum threads and reviews, I thought it would make a nice FPV plane with a few mods.
Forget the landing gear. I'm mounting a belly pan and wing skids for grass landings. I'll use my JetaPult for launching.
As far as the power system, I'm installing an Electrifly .10 Rimfire motor with a CF folding prop on the back. Don't care if the outrunner motor is on the outside.
The plastic used for the camera pod is useless. Hazy and distorted view looking through it. Better to paint it grey and put the camera on top, or at least cut a hole for the camera to see through the hazy bubble nose. I'll also put some extra CF bracing on the wing joints, to help keep the wing from folding, under stress. I'm also thinking of adding two small v-tail like fins on the back, to add more stability.

Overall, it's built pretty good, with the exception of the camera bubble and landing gear.
If you don't mind making some mods, this CAN be a very good plane.

Over use of resin makes it nearly impossible to mount the motor internally. Significant modifications are required if you intend to do this. I cut out the firewall and rebuilt it to mount the motor inside for the clean look. Nice finish but my nose was "tweeked" and slightly twisted. Shouldn't be a problem but for $70 ive seen worse...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Over use of resin makes it nearly impossible to mount the motor internally. Significant modifications are required if you intend to do this. I cut out the firewall and rebuilt it to mount the motor inside for the clean look. Nice finish but my nose was "tweeked" and slightly twisted. Shouldn't be a problem but for $70 ive seen worse...

Customer files
No File Name Download [4025]
No File Name Download [4025]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save