Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati

TGY AerodriveXp SK Serie 63-74 170Kv / 3250W

TGY AerodriveXp SK Serie 63-74 170Kv / 3250W

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
870 g
SKU:
SK-6374-170
Descrizione
prodotto
TURNIGY AerodriveXp Serie SK
I motori AerodriveXP SK serie sono progettate per chi vuole il meglio della tecnologia per la loro outrunner / C aereo R. Tipicamente un miglioramento dell'efficienza di circa il 8-10% può essere visto sopra motori classificato simili. Questo è in parte dovuto al seguente;
Statore laminazioni: .2mm
Tipo di magnete: N45SH
Cuscinetti: doppio oversize (Singapore)
Albero: 10mm temprato
Modello: 170 SK63-74
Kv: 170rpm / v
Attiva: 9
Resistenza: 50 Ohm
Idle corrente: 1.9A
Albero: 10mm
Peso: 840g
Potenza nominale: 3250W
ESC: 100A +
conteggio delle cellule: 6-10
Suggerita Prop: 22x10 26x10 ~
Potenza equivalente: 30% warbirds scala o piani 3D fino a 100inch e tutto ciò che richiede un motore di 26 ~ 45cc del gas.

* Comprende il Monte e accessori adattatori prop (non mostrato)
Product
Specifications

Ulteriori informazioni

  • SKU:
    SK-6374-170
  • Brand:
    N/A
  • Peso (g)
    870.00
  • Lunghezza
    0.00
  • Larghezza:
    0.00
  • Altezza:
    0.00
  • Kv ( rpm / v )
    170.00
  • Unit Weight (g)
    840
  • Correnti Max (A):
    0.00
  • Resistenza ( mh ):
    50.00
  • Max Tensione (V )
    37.00
  • Potenza ( W )
    3250.00
  • Albero A ( mm ):
    10.00
  • Lunghezza B ( mm ):
    75.00
  • Diametro C ( mm )
    63.00
  • Can Lunghezza D ( mm )
    55.00
  • Lunghezza totale E ( mm ):
    101.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Beide Motoren sind nach 2 Wochen Benutzung durchgebrandt.
Die Wiklungen sind nicht wirklich sauber.

Aber eine gute Grundlage fr einen Eigenwikelmotor, mit 1,5 mm CU Dracht in der Verschaltung AacCBbaACcbB ne warer Kraftprotz.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
What happend?

I bought 6374 and K-Force HV

But My Motor has about 230kv |o|



omitted 2 turns?



20x8 prop should be MAX @12S.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Habe den Motor in einer 2.2 Meter Robin von Graupner,Standschubmessung hat er nicht berlebt,Glocke hat sich vom Flansch gelst,dadurch Motor blockiert und auf der andern Seite angefressen,Lager habe ich vorsichtshalber gegen neue SKF getauscht.Wicklung mit Klarlack gesichert,waren lose.Kabelausgang beim Gehuse mit Silikonkleber gesichert.
Motor nicht zu empfehlen ohne Nacharbeit
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Type your review here.
Try to include as much data as possible
Used this motor in Glo to Elec conversionUsed turnigy 120 amp
speed controlUsed 9S-2P A-123 batt pk with 26-15 APC prop
cut to 24 in dia for ground clearence.Prop drew 1700 watts.
model weighs 17 lbs.Very satified.
Willie McMath
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I put this motor in a scratch built Ex 300 es that was converted form a glo powered St 3250

Used 11s2p A123 batt pk -24d-15p apc.get 8-9 min flgt.So far very satified with motor.

Willie McMath
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Glued the magnets before the first use and +250 flights. It keeps going, thx HC.

10 s rhino's 4900 mah on an ef extra 78" exp, unbelievable power with apc 20 x 10. Pull's 75 amps
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Moteur trs performant, Il tourne sur un Pilatur Poter de 2.64m en 12S1P 5000mah.

Je tourne actuellement avec une hlice Fiala 21*13E et il dlivre la puissance annonce.

Seul petit bmol, il faut vrifier le serrage de toute la visserie ...

Yves
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
Just purchased motor.. (june 2010) My motor has many minor dents and scratches. I wonder if this was a new motor or a rebeult!!!!??? also a wire on the stator was almost touching the magnets so I had to take it apart to move it to a safe place before trying to test motor.Guess what! there are only 3 bearings total! 2 in back and one in front! now let's see if it is balanced...
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I received the last items needed for my 30cc gas replacement project, tested the power system with the following results: 2-5S 5800 mAh batteries in series with a 22x12 prop, 100A Sentilon ESC, results are 40.5V, 56A, 2200W, and 5400 Rpm for 21 lbs (9526g) of static thrust. The only surprise was the big arc when connecting up the battery. I hadn't heard anyone else mention that fact. You will be pleased with this setup.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
I have two of these motors and have added glue to the magnets due to them coming loose. No bearing problems. This motor is still an outstanding deal. I fly a 21lb P47 on 12S with a 21X13 prop with over 40 flights. Great power, speed, can not beat for the price. More power than the 35CC Evolution gas motor it replaced. Very happy.
verified_user Quality
trending_up Value
playlist_add_check Overall
View all reviews
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.