Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

TowerPro Brushless Outrunner 2410-09 13A / 104W

Generating Links

TowerPro Brushless Outrunner 2410-09 13A / 104W

Prezzo:

Now save risparmia 0,00 € 0,00 €

6,14 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
TP2410-09
Spedizione gratuita? Clicca qui per saperne di più!
TP2410-09
Dimensioni: 31 x 62 millimetri
Peso: 64.5g
Tensione: 10V (lipo 2 ~ 3 celle)
Idle corrente: .5A
Kv: 840RPM / V
Albero: 3mm (può usare tre millimetri prop saver se lo si desidera)
Max Efficienza: 8.4A
Carico massimo: 13,5A
Potenza massima: 104W
Suggerita Prop: 9 * 4.7 / Fly lenta 1047
Nota: Il supporto di plastica in dotazione deve essere forato per adattarsi al motore. Questo supporto è stato inserito con i motori outrunner TowerPro per più di 6 anni ed è sempre stato così.
  • Kv ( rpm / v ) 840.00
  • Correnti Max (A) 13.50
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 11.00
  • Potenza ( W ) 104.00
  • Albero A ( mm ) 3.00
  • Lunghezza B ( mm ) 35.00
  • Diametro C ( mm ) 31.00
  • Can Lunghezza D ( mm ) 11.00
  • Lunghezza totale E ( mm ) 62.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

woodbpilot | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 18, 2012

Great motor for GWS Slowstick. I have purchased about 20 of these motors for my slow(stick) friends and all come back for more (too lazy to buy their own). The motor mount works and now comes drilled on the last ones that I ordered. this mount also works: <http://www.hobbyking.com/hobbyking/store/__3613__TowerPro_Alloy_Stick_Mount_for_24_Motors.html>

trialbrasil | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 14, 2011

EU SEMPRE USO ESTE MOTOR EM MEUS AEROS, SEM DVIDA SO O MELHOR CUSTO BENEFICIO. EU USO COM SPEED 20A E LIPO 3S X 1300 MAH, HELICE 10 X 4,7. PERFEITO.

Lubis | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 05, 2011

A good and strong motor perfect for my tricopter

davovinch | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 01, 2011

I got one of these from HK and it had a bad bearing. I didn't get to the motor until many weeks after ordering. The discovery is grim and I don't think it cost effective to ship it back. I know HK's prices are great but I am a little soured by this experience.

Atoniollo | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 31, 2011

bom motor para eros de pequena escala..

pizzaschnitzer | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 20, 2011

little less good on the mount. needed it to fix my tricopter

Romushock | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 05, 2011

I've buy 4 of this for my first quadricopter. One was too tight to volve and I've replace his ball bearings. All four had need to be balanced. However quad is fly now, motor can be recommended.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 23, 2011

Fantastic value for your buck...!!!

Use a prop saver, and cut the shaft off. Ensure the grub screws are tight on the shaft. The firewall mount (3 hole flange) can be removed simply by undoing the other two grub screws and then hold the shaft and firmly pull the flange off. I put a photo in the files to show how and where to mount the motor on the plastic mount.

Bob-Texas | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 14, 2011

Interesting comments about the mount. I had the same problem unitl I placed the shaft of the motor on to the location where the original shaft of the mount would be. The mount holes then line up perfectly and all you have to deal with is those tiny little screws and nuts. This also places the propeller in the same location as the original geared motor. I just had to rebalance and go fly. It screams with power !!!

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 28, 2011

boght this one as combo with BEC. Works great in my MPX TwinStar II.
Performance and amps are just perfect for this plane.
How ever, the quality of the motor mount could be better.
I lost one motor in the midle of the flight. So pay special attention to the screw that holds the shaft on the mount.
Will by some more a spare parts.

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. 6
File dei clienti
Please look closely at the picture below Download [82]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!