TR 35-36A 1450kv Brushless Outrunner (Eq: 2814

• Overall
• Quality
• Value

Customer Rated

Feb 25, 2012

Installation in SkyWalker.
3S LiPo, 9x6 APC prop.
Great price for a motor with accessory pack.
Did not use the accessory pack though.
Pulled shaft out and reversed.
Running prop-adapter directly on shaft.
Will also use the 9.5x5 folder on this.
Numbers to follow.

• Overall
• Quality
• Value

Customer Rated

Jan 30, 2012

ESTE MOTOR TIRA COMO UN COHETE , ESTAS SON MIS MEDICIONES.
HELICES 9*6 - BATERIAS TURNIGY 2200 mAh. 3S 25C - PICO DE WATIOS 467 W - CONSUMO 44A. LO TENGO MONTADO EN UN BLIZZARD DE MPX Y VA DE LUJO

• Overall
• Quality
• Value

Customer Rated

Jun 20, 2011

I have this motor installed in my Multiplex Gemini. The recomended 9x6 prop is to much for this motor. I'm using the apc style 8x6, flightmax 2200mah 3s1p. My hobbyking wattmeter indicates about 58 amps and over 600 watts at full throttle. Vertical performance is insane. I hand launch this plane from my left hand, throttle up with my mouth at wich time this monster rips from my fingers and I control the climbout I would not keep at full throttle for more then 10-15 seconds. I have six flights on this motor, average eight minutes flight time. Will report back after 30. Have my doubts about it lifespan with the 8x6.

• Overall
• Quality
• Value

Customer Rated

Jun 19, 2011

This motor is a beast. I run it way past specs with a 3s battery, 60 amps ESC, and 9x6 prop on a T28 which draws 52 amps right at 600 watts. I, also run it on a 4s battery but haven't taken a reading as I don't want to get near the prop. On 3s it's very fast on 4s it's insane. Very short bursts only. I notice this motor isnt't even rated for a 4s battery.. Who would of thought!

• Overall
• Quality
• Value

Customer Rated

Apr 16, 2011

Yo compr ya 2 motores, y funcionan muy bien. COn el primero me estrell de frente, el motor se aboll, pero no ha dejado de funcionar, a pesar incluso de que se pelaron los cables por el choque, solo los volv a cubrir con cinta, y sigue funcionando correctamente.
Muy buen motor !! Very well motor, it works fine !!

• Overall
• Quality
• Value

Customer Rated

Mar 28, 2011

great motor. I have 6 of these now and love them.. I have 3 of them in eflight mini sticks. mine and my sons has turnigy 60amp plush esc,tgs 8x7e prop, I use 2 turnigy 1450mah 2s 30c batteries in parallel for 2900mah 2s and turnigy 2100mah 35c 3s. my freinds (I take care of) has thunderbird 54 esc, tgs 8x7e prop, 2 turnigy 1800mah 30c 2s in parallel. one 2 meter glider converted to electric (no slopes here) with a turnigy 40amp plush esc. tgs 8x7e prop, 2 turnigy 1800mah 30c 2s in parallel. and a ninja glider with a turnity 40amp esc, apc 8x7e prop, 2s 3600mah. and one spare that has not been used yet. on 2s they pull 30-32amps, and on 3s they pull almost 50amps. you can only run at full throttle on 3s for short amounts of time but at full throttle it gose to fast for plane in level flight and will go straight up as far as you want, so no problems. 2 have well over 100 flights on 2s. 2 have close 100 flights, with one of them getting some flights on 3s. last one only has a few flights.

• Overall
• Quality
• Value

Customer Rated

Mar 03, 2011

Using this motor on a Parkzone T28 with an aluminum motor mount.

50 amp ESC

APC 9x6e Prop

Turnigy 2200 30C lipo

With 2 ounces added weight in the back by the rudder servo.

48 amps 530 watts peak.

The plane just goes straight up forever.

• Overall
• Quality
• Value

Customer Rated

Feb 18, 2011

Hello, I just measured the resistance of this motor
The resistance of 3 windings is 82, 60 and 77 mohm.
73 mohm is average.

• Overall
• Quality
• Value

Certified Buyer Rated

Feb 06, 2011

I bought 2 Motors,one ist good, one runns very loud with vibration!

• Overall
• Quality
• Value

Customer Rated

Jan 20, 2011

Este motor para mi blizzard de mpx va sobrado de potencia y ademas le rebajamos alguno gramos de peso , con una helice 9*6 va como un tiro y no hace falta poner lastre en el velero . Aconsejable 100