New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Trackstar 1/18 ° del sistema di alimentazione Scala 12T Brushless (5050kv)

Trackstar 1/18 ° del sistema di alimentazione Scala 12T Brushless (5050kv)

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

32,48 €
Stato:
Disponibile
SKU:
9052000006
WANT FREE SHIPPING? Click here to find out more!

prestazioni Trackstar ora disponibile in facile selezionare il pacchetto Combo!

Utilizzando un veloce Silicon Labs MCU e di alta qualità on-Semiconductor MOSFET il Trackstar 18A ESC stabilisce un nuovo standard in alta qualità ancora CES auto a prezzi accessibili. Con la logica intelligente MCU CES serie Trackstar permettono estremamente preciso avviare il controllo e avanzamento di posizionamento indietro dal motore. In combinazione con il motore di qualità a 4 poli questo si traduce per iniziare molto liscia e l'accelerazione e coppia.

Il Turnigy Trackstar 18A ESC vanta anche una serie di opzioni di programmazione di solito non si trovano in un CES di queste dimensioni e può essere programmato con facilità tramite la scheda di programmazione Turnigy Trackstar (venduto separatamente)

ESC Specification:
Cont. Corrente: 18A
Burst corrente: 25A
Auto Dimensione: 1/18
Batteria: 2-3 cellulare Lipo / 4-9 cellulare Ni-XX
L-BEC: 5V / 1A uscita
Tipo motore: Brushless Sensorless
Dimensioni: 30 x 26.1 x 13,8 millimetri
Peso: 26g (Compreso fili)
Spine Motore: Tipo di 3,5 millimetri proiettile
Batteria Spina: Richiesto
On / Off:
Reverse:

Specifiche del motore:
Attiva: 12T
Valore KV: 5050KV
Poli: 4
Diametro: 21,5 millimetri
Lunghezza del motore: 37mm
Estendere diametro albero: 2mm
Lunghezza di estendere dell'albero: 11 ± 0,5 millimetri
Peso: 60g
Nessun carico @ 7.2V: 2.2A
Corrente max: 34A
Resistenza (Ω): 0.027Ω
Gamma della batteria: 2 ~ 3s 7.4v ~ 11.1v
Temperatura di funzionamento: 80 °
Temperatura massima di 130 °
Scala auto adatto: 1/18
Adatto ESC: 25A
Spessore di laminazione: 0.2X20mm

  • SKU 9052000006
  • Brand TrackStar
  • Peso 145.0000
  • Lunghezza 130.00
  • Packaging Width 35.00
  • Altezza 110.00
  • Kv ( rpm / v ) 5050.00
  • Correnti Max (A) 34.00
  • Resistenza ( mh ) 0.12
  • Max Tensione (V ) 8.00
  • Potenza ( W ) 220.00
  • Albero A ( mm ) 2.00
  • Lunghezza B ( mm ) 38.00
  • Diametro C ( mm ) 22.00
  • Can Lunghezza D ( mm ) 36.00
  • Lunghezza totale E ( mm ) 49.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Slapped one of these into a Team Associated RC18T and a Team Losi Mini T. Great power and coupled with the programming card this makes a great setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Slapped one of these into a Team Associated RC18T and a Team Losi Mini T. Great power and coupled with the programming card this makes a great setup.

Installed this onto a HPI rs4 with some slight mods to chassis, absolutely weapon of a vehicle and very impressed overall!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Installed this onto a HPI rs4 with some slight mods to chassis, absolutely weapon of a vehicle and very impressed overall!

Great power system I use in my micro rs4 it's very fast you will need to get 2.5mm bolts for mounting motor and drill the motor mount holes out cause stock bolts are 2mm

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great power system I use in my micro rs4 it's very fast you will need to get 2.5mm bolts for mounting motor and drill the motor mount holes out cause stock bolts are 2mm

I put this in a LaTrax SST 1/18 truck. Unbelievable performance for the money. Suuuuuper fast on a 14t pinion, but gets hot - on a 80F day, motor measured 160F and ESC measured 130F after a 10 minute run. 13t pinion would be better for bashing and not worrying about temps. (or get the lower KV version of the motor) Not quite drop in - you need to provide your own motor mounting screws, and some dremeling is required on the aluminum motor mount (holes on the LaTrax motor mount are a little too far apart and there's a ridge you need to grind down) Don't bother with the programming card, mine runs perfect on stock settings. I'm running a 2000mah 2s receiver pack - PRODUCT ID: 9210000043 - and with a minor dremel mod to the battery tray it's a PERFECT fit. After a 10 minute run each cell still has 4.0 volts. Top notch!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I put this in a LaTrax SST 1/18 truck. Unbelievable performance for the money. Suuuuuper fast on a 14t pinion, but gets hot - on a 80F day, motor measured 160F and ESC measured 130F after a 10 minute run. 13t pinion would be better for bashing and not worrying about temps. (or get the lower KV version of the motor) Not quite drop in - you need to provide your own motor mounting screws, and some dremeling is required on the aluminum motor mount (holes on the LaTrax motor mount are a little too far apart and there's a ridge you need to grind down) Don't bother with the programming card, mine runs perfect on stock settings. I'm running a 2000mah 2s receiver pack - PRODUCT ID: 9210000043 - and with a minor dremel mod to the battery tray it's a PERFECT fit. After a 10 minute run each cell still has 4.0 volts. Top notch!!

excellent combo ,I installed it on my xray m18, and it fits very well and runs excellent

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

excellent combo ,I installed it on my xray m18, and it fits very well and runs excellent

Parfait pour mon CR 1/16

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Parfait pour mon CR 1/16

This esc and motor combo is the exact same as the toro with a different brand name. this motor works great with the Dromida Rc cars by Revell. it is a direct drop in and it is plenty fast. i have yet to experience any issues with it.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This esc and motor combo is the exact same as the toro with a different brand name. this motor works great with the Dromida Rc cars by Revell. it is a direct drop in and it is plenty fast. i have yet to experience any issues with it.

I chose this middle power version (TrackStar 1/18th Scale 12T Brushless power System 5050kv) for my RC18T2 build and I would have taken the lower kv one, but it was out of stock. Quality seems great and price is very resonable. Only time will tell how it handles all the torture I'm gonna put it through.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I chose this middle power version (TrackStar 1/18th Scale 12T Brushless power System 5050kv) for my RC18T2 build and I would have taken the lower kv one, but it was out of stock. Quality seems great and price is very resonable. Only time will tell how it handles all the torture I'm gonna put it through.

Took two weeks to get it from Hong Kong to the US, but worth the price and wait. My RC18B2 is way faster and smoother than the factory brushed motor setup.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Took two weeks to get it from Hong Kong to the US, but worth the price and wait. My RC18B2 is way faster and smoother than the factory brushed motor setup.

This combo is perfect for 2s lipo on ftx colt and ripmax jackal 1/18, standard gearing,nice temps, good speeds, easy to install just need to solder your chosen battery connecter, motor runs a little too hot on 3s after a while, would need some kind of heatsink and fan,to be honest the speed from the 3s is too insane, flips from a stand still!good for a few speed runs just moniter temps.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This combo is perfect for 2s lipo on ftx colt and ripmax jackal 1/18, standard gearing,nice temps, good speeds, easy to install just need to solder your chosen battery connecter, motor runs a little too hot on 3s after a while, would need some kind of heatsink and fan,to be honest the speed from the 3s is too insane, flips from a stand still!good for a few speed runs just moniter temps.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Related Tags

Combine Essential Items and Save