New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Trackstar 150A GenII 1 / 8th scala Sensored Brushless auto ESC - (PC programmabile)

Trackstar 150A GenII 1 / 8th scala Sensored Brushless auto ESC - (PC programmabile)

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

75,14 €
Stato:
Disponibile
SKU:
9052000047
WANT FREE SHIPPING? Click here to find out more!

Non tutti i regolatori di velocità sono creati uguali. Il Trackstar 150A GenII 1 / 8th Sensored ESC è una evoluzione su disegni precedenti e un vero purosangue nella stalla Trackstar. Progettati e testati in condizioni di gara il 150A GenII 1 / 8th ESC è pronta a resistere alle elevate esigenze di piloti competitivi. Gli ingegneri Trackstar progettato il 150A GenII 1 / 8th ESC con un obiettivo in mente, la creazione di un Comitato che avrebbe offerto prestazioni, affidabilità e durata quando posto sotto pressione.

Il Trackstar 150A GenII 1 / 8th Sensored ESC offre una serie di opzioni di programmabilità che la maggior parte piloti si aspettano e dipendono. La programmazione può essere fatto lato pista con la scatola di programmazione multi funzione o tramite PC con il software Trackstar USB Link.


Per una combinazione vincente utilizzare il Trackstar 150A GenII 1 / 8th Sensored ESC con la nostra comprovata Trackstar dimensioni 1/8 "può rosse" motori per un pacchetto che lascia la concorrenza nella polvere sulle prestazioni e il valore!



Caratteristiche:
• 150A Corrente continua / 950A Burst
• Sensored / sensorless Funzionamento
• 2 ~ 6S LiPo Capace
• 10 profili predefiniti utente programmabili
• ESC surriscaldamento Protezione
• surriscaldamento del motore di protezione
• Curve programmabili freno e acceleratore
• Boost regolabile e Turbo Timing
• freno regolabile e trascinare Brake
• programmabile PC



* Nota: sopra c'è una lista di alcune delle principali opzioni di programmazione. Sono disponibili molte più opzioni se utilizzate con la Smart Program Box multifunzione e / o programmabilità PC TrackStar opzionale. Si prega di comprendere che se si aggiorna il firmware ESC, è possibile calibrare solo il throttle e che la Program Box e la programmabilità del PC non funzioneranno più o saranno compatibili. Non sarai in grado di resettare l'ESC ai protocolli o alle impostazioni di fabbrica.

 


Specifiche:
Costante / Burst corrente: 150A / 950A
Compatibilità Motore: Brushless sensored e sensori
Compatibilità Auto: 1/8 su strada, off road crawler e 1/8
Limiti motore:
2 ~ 4S LiPo: KV <3000, 2 ~ 6 poli
2 ~ 6S LiPo: KV <2400, 2 ~ 4 poli
Resistenza: 0.0002ohm
Conteggio delle cellule di batteria: 6 ~ 18S NiMH o 2 ~ 6S LiPo
BEC uscita: 6V @ 5A
Dimensioni: 58x41x38mm
Peso: 95g (senza fili)

* Nota: sopra c'è una lista di alcune delle principali opzioni di programmazione. Sono disponibili molte più opzioni se utilizzate con la Smart Program Box multifunzione e / o programmabilità PC TrackStar opzionale. Si prega di comprendere che se si aggiorna il firmware ESC, è possibile calibrare solo il throttle e che la Program Box e la programmabilità del PC non funzioneranno più o saranno compatibili. Non sarai in grado di resettare l'ESC ai protocolli o alle impostazioni di fabbrica.

 

  • SKU 9052000047
  • Brand TrackStar
  • Capacità ( mAh ) -
  • Peso 225.0000
  • Lunghezza 160.00
  • Packaging Width 45.00
  • Altezza 110.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

is very nice quality, work fine with castle 2200kv and blx 2050kv. 2h non stop race mega jump no problem.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

is very nice quality, work fine with castle 2200kv and blx 2050kv. 2h non stop race mega jump no problem.

My Trackstar 150A GenII ESC just died (stopped working and I can´t turn it on anymore) - It did´nt even last 30min. of overall use. It made squeaky noises which I thought was normal (getting back into the hobby again after 7 years).

I had it running on a 6SLiPo pack with a Turnigy SK3 280KV motor. So, I´m a bit confused since the specs says suggest that it can work with a 6S LiPo and a motor under 2400 KV. I was well within the ESC´s capabilities (or so I thought). Did I confuse anything or was my ESC just crap?

Anyway - at this point I´m just very much disappointed. I touched the ESC to see if it was overheated but the heatsink was rather cool so I´m not sure what went wrong. Either way, I can´t recommend this ESC. It´s a shame because I liked the programming capability via PC.

Move on and look for another ESC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My Trackstar 150A GenII ESC just died (stopped working and I can´t turn it on anymore) - It did´nt even last 30min. of overall use. It made squeaky noises which I thought was normal (getting back into the hobby again after 7 years).

I had it running on a 6SLiPo pack with a Turnigy SK3 280KV motor. So, I´m a bit confused since the specs says suggest that it can work with a 6S LiPo and a motor under 2400 KV. I was well within the ESC´s capabilities (or so I thought). Did I confuse anything or was my ESC just crap?

Anyway - at this point I´m just very much disappointed. I touched the ESC to see if it was overheated but the heatsink was rather cool so I´m not sure what went wrong. Either way, I can´t recommend this ESC. It´s a shame because I liked the programming capability via PC.

Move on and look for another ESC.

WELL, FINALLY AFTER 2 MONTHS I GET MY ARRMA TYPHON UP & RUNNING AGAIN, THE STOCK SERVO & SPEED CONTROLLER JUST STOPPED WORKING. SO I PURCHASED THIS (TrackStar 150A GenII) AFTER HEARING GOOD THINGS ABOUT IT.
I TOOK IT TO THE PARK TO TEST IT OUT AND IT STARTED OUT GREAT, I MEAN SPEED, POWER, TIMING, AND EVEN THE TURBO WERE ALL PRECISE, JUST AS I HAD SET THEM WITH MY PROGRAM CARD. THEN I TOOK IT FOR A JUMP TO TEST MY SUSPENSION AND THAT WAS IT. IT LANDED AND NEVER TOOK OFF AGAIN. I ASSUMED SOMETHING WAS DISCONNECTED BUT I COULD STILL HEAR THE FAN RUNNING AND THE LED WAS STILL ON. WHAT THE HELL IS GOING ON? AFTER ALL THIS TIME THAT'S IT? NOT EVEN 10 MINUTES RUN TIME. WHEN I DISCONNECTED AND REMOVED IT FROM THE CHASSIS, I COULD HEAR SOMETHING OR SOME THINGS RATTLING AROUND INSIDE. DON'T KNOW WHAT IT IS SHAKING AROUND INSIDE BUT THE THING STILL SMELLS BRAND SPANKIN NEW. I'M NOT HERE TO BASH TRACKSTAR OR HOBBYKING BUT AS FAR AS I CAN SEE I DID NOTHING WRONG TO THIS UNIT AND FEEL LIKE I DESERVE AN EXCHANGE FOR THIS ITEM.
I WASN'T DOING ANY HARDCORE BASHING I WAS TESTING IT OUT. ONLY WEN'T ABOUT 3 FT. HIGH AT ABOUT 20 - 22 MILES P/HOUR AND LANDED UPRIGHT. THIS JUST DOESN'T MAKE SENSE TO ME. I WAS ON MY WAY TO BECOMING A PLATINUM CUSTOMER. IF ANY ONE AT HOBBYKING READS THIS, IS IT POSSIBLE FOR ME TO EXCHANGE THIS FOR ANOTHER ONE?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WELL, FINALLY AFTER 2 MONTHS I GET MY ARRMA TYPHON UP & RUNNING AGAIN, THE STOCK SERVO & SPEED CONTROLLER JUST STOPPED WORKING. SO I PURCHASED THIS (TrackStar 150A GenII) AFTER HEARING GOOD THINGS ABOUT IT.
I TOOK IT TO THE PARK TO TEST IT OUT AND IT STARTED OUT GREAT, I MEAN SPEED, POWER, TIMING, AND EVEN THE TURBO WERE ALL PRECISE, JUST AS I HAD SET THEM WITH MY PROGRAM CARD. THEN I TOOK IT FOR A JUMP TO TEST MY SUSPENSION AND THAT WAS IT. IT LANDED AND NEVER TOOK OFF AGAIN. I ASSUMED SOMETHING WAS DISCONNECTED BUT I COULD STILL HEAR THE FAN RUNNING AND THE LED WAS STILL ON. WHAT THE HELL IS GOING ON? AFTER ALL THIS TIME THAT'S IT? NOT EVEN 10 MINUTES RUN TIME. WHEN I DISCONNECTED AND REMOVED IT FROM THE CHASSIS, I COULD HEAR SOMETHING OR SOME THINGS RATTLING AROUND INSIDE. DON'T KNOW WHAT IT IS SHAKING AROUND INSIDE BUT THE THING STILL SMELLS BRAND SPANKIN NEW. I'M NOT HERE TO BASH TRACKSTAR OR HOBBYKING BUT AS FAR AS I CAN SEE I DID NOTHING WRONG TO THIS UNIT AND FEEL LIKE I DESERVE AN EXCHANGE FOR THIS ITEM.
I WASN'T DOING ANY HARDCORE BASHING I WAS TESTING IT OUT. ONLY WEN'T ABOUT 3 FT. HIGH AT ABOUT 20 - 22 MILES P/HOUR AND LANDED UPRIGHT. THIS JUST DOESN'T MAKE SENSE TO ME. I WAS ON MY WAY TO BECOMING A PLATINUM CUSTOMER. IF ANY ONE AT HOBBYKING READS THIS, IS IT POSSIBLE FOR ME TO EXCHANGE THIS FOR ANOTHER ONE?

WELL, FINALLY AFTER 2 MONTHS I GET MY ARRMA TYPHON UP & RUNNING AGAIN, THE STOCK SERVO & SPEED CONTROLLER JUST STOPPED WORKING. SO I PURCHASED THIS (TrackStar 150A GenII) AFTER HEARING GOOD THINGS ABOUT IT.
I TOOK IT TO THE PARK TO TEST IT OUT AND IT STARTED OUT GREAT, I MEAN SPEED, POWER, TIMING, AND EVEN THE TURBO WERE ALL PRECISE, JUST AS I HAD SET THEM WITH MY PROGRAM CARD. THEN I TOOK IT FOR A JUMP TO TEST MY SUSPENSION AND THAT WAS IT. IT LANDED AND NEVER TOOK OFF AGAIN. I ASSUMED SOMETHING WAS DISCONNECTED BUT I COULD STILL HEAR THE FAN RUNNING AND THE LED WAS STILL ON. WHAT THE HELL IS GOING ON? AFTER ALL THIS TIME THAT'S IT? NOT EVEN 10 MINUTES RUN TIME. WHEN I DISCONNECTED AND REMOVED IT FROM THE CHASSIS, I COULD HEAR SOMETHING OR SOME THINGS RATTLING AROUND INSIDE. DON'T KNOW WHAT IT IS SHAKING AROUND INSIDE BUT THE THING STILL SMELLS BRAND SPANKIN NEW. I'M NOT HERE TO BASH TRACKSTAR OR HOBBYKING BUT AS FAR AS I CAN SEE I DID NOTHING WRONG TO THIS UNIT AND FEEL LIKE I DESERVE AN EXCHANGE FOR THIS ITEM.
I WASN'T DOING ANY HARDCORE BASHING I WAS TESTING IT OUT. ONLY WEN'T ABOUT 3 FT. HIGH AT ABOUT 20 - 22 MILES P/HOUR AND LANDED UPRIGHT. THIS JUST DOESN'T MAKE SENSE TO ME. I WAS ON MY WAY TO BECOMING A PLATINUM CUSTOMER. IF ANY ONE AT HOBBYKING READS THIS, IS IT POSSIBLE FOR ME TO EXCHANGE THIS FOR ANOTHER ONE?

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

WELL, FINALLY AFTER 2 MONTHS I GET MY ARRMA TYPHON UP & RUNNING AGAIN, THE STOCK SERVO & SPEED CONTROLLER JUST STOPPED WORKING. SO I PURCHASED THIS (TrackStar 150A GenII) AFTER HEARING GOOD THINGS ABOUT IT.
I TOOK IT TO THE PARK TO TEST IT OUT AND IT STARTED OUT GREAT, I MEAN SPEED, POWER, TIMING, AND EVEN THE TURBO WERE ALL PRECISE, JUST AS I HAD SET THEM WITH MY PROGRAM CARD. THEN I TOOK IT FOR A JUMP TO TEST MY SUSPENSION AND THAT WAS IT. IT LANDED AND NEVER TOOK OFF AGAIN. I ASSUMED SOMETHING WAS DISCONNECTED BUT I COULD STILL HEAR THE FAN RUNNING AND THE LED WAS STILL ON. WHAT THE HELL IS GOING ON? AFTER ALL THIS TIME THAT'S IT? NOT EVEN 10 MINUTES RUN TIME. WHEN I DISCONNECTED AND REMOVED IT FROM THE CHASSIS, I COULD HEAR SOMETHING OR SOME THINGS RATTLING AROUND INSIDE. DON'T KNOW WHAT IT IS SHAKING AROUND INSIDE BUT THE THING STILL SMELLS BRAND SPANKIN NEW. I'M NOT HERE TO BASH TRACKSTAR OR HOBBYKING BUT AS FAR AS I CAN SEE I DID NOTHING WRONG TO THIS UNIT AND FEEL LIKE I DESERVE AN EXCHANGE FOR THIS ITEM.
I WASN'T DOING ANY HARDCORE BASHING I WAS TESTING IT OUT. ONLY WEN'T ABOUT 3 FT. HIGH AT ABOUT 20 - 22 MILES P/HOUR AND LANDED UPRIGHT. THIS JUST DOESN'T MAKE SENSE TO ME. I WAS ON MY WAY TO BECOMING A PLATINUM CUSTOMER. IF ANY ONE AT HOBBYKING READS THIS, IS IT POSSIBLE FOR ME TO EXCHANGE THIS FOR ANOTHER ONE?

After on year and 4 month, my esc just blowed up!
I've just run my savage "8 times" in one year.
The last run , i was just climbing a small rock at very low speed (crawling mode) when i saw a lot of smoke coming out from my savage.
How it could be possible to burn an esc when the thermal protection is set @ 85°c on the esc and the motor? I oppened the esc and when i saw a lot of tin soleder on the pcb i was afraid.
Unluckly, after a good cleanning, 5 chip from the esc are dead and the warranty is out!

I'm not sure to buy any item with the logo turnigy on it before a long time......

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

After on year and 4 month, my esc just blowed up!
I've just run my savage "8 times" in one year.
The last run , i was just climbing a small rock at very low speed (crawling mode) when i saw a lot of smoke coming out from my savage.
How it could be possible to burn an esc when the thermal protection is set @ 85°c on the esc and the motor? I oppened the esc and when i saw a lot of tin soleder on the pcb i was afraid.
Unluckly, after a good cleanning, 5 chip from the esc are dead and the warranty is out!

I'm not sure to buy any item with the logo turnigy on it before a long time......

amazingly powerful and nicely compacted into one unit. great options like running 6s. hopefully these do come back in surply as I would love another one. very easy to setup and go

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

amazingly powerful and nicely compacted into one unit. great options like running 6s. hopefully these do come back in surply as I would love another one. very easy to setup and go

A powerful reliable well engineered ESC. Easily tuned with the programming card or via a Pc connection. Add this to one of the HobbyKIng Turnigy sensored brushless motors and you will be enjoying smooth controlled power all day long .. Highly recommended through My many hours of fast racing fun

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

A powerful reliable well engineered ESC. Easily tuned with the programming card or via a Pc connection. Add this to one of the HobbyKIng Turnigy sensored brushless motors and you will be enjoying smooth controlled power all day long .. Highly recommended through My many hours of fast racing fun

@ $77 this ESC is worth every penny and then some. Got my 1/8 buggy (all stock RTR) going from 30mph to 40mph using the same batteries as before. Just buy it...and the programming card because without it you can't program via PC either. HK doesn't stock the USB connector so you MUST buy the programming card to connect to PC.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

@ $77 this ESC is worth every penny and then some. Got my 1/8 buggy (all stock RTR) going from 30mph to 40mph using the same batteries as before. Just buy it...and the programming card because without it you can't program via PC either. HK doesn't stock the USB connector so you MUST buy the programming card to connect to PC.

i bought this esc since it has a lot of positive review, but my esc stop working while i only had a few round with my buggy, it's really huge disappointment. anyone had this problems or i had a bad batch of esc.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i bought this esc since it has a lot of positive review, but my esc stop working while i only had a few round with my buggy, it's really huge disappointment. anyone had this problems or i had a bad batch of esc.

Abbinato ad un Turnigy TrackStar 1/8th Sensored Brushless Motor 2350KV dopo 4 utilizza con una macchina 1/8 andato in fumo!!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Abbinato ad un Turnigy TrackStar 1/8th Sensored Brushless Motor 2350KV dopo 4 utilizza con una macchina 1/8 andato in fumo!!!

  1. 1
  2. 2
  3. 3
  4. 4
Customer files
TrackStar 150A GenII 1/8th ESC Manual Download [2177]
TU USB Link V2.06.zip Download [352]
TUUsbLink_V2.zip Download [250]
20180612_124947.jpg Download [5]
20180612_125019.jpg Download [5]
Top_View_150A_ESC.jpg Download [1]
Top_View_Car.jpg Download [1]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save