New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Interruttore POWER Trackstar

Interruttore POWER Trackstar

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

11,17 €
Stato:
Disponibile
SKU:
9052000074-0
WANT FREE SHIPPING? Click here to find out more!

Trackstar introduce l'interruttore POWER!

Si tratta di un piccolo MCU controllato / off per il modello a controllo radio. Un semplice pulsante aziona l'interruttore che elimina i problemi associati con il contatto intermittente di un interruttore meccanico ordinaria.

L'interruttore POWER Trackstar può funzionare in modalità Lipoly, in cui l'unità interruttore si auto detech bassa tensione Lipoly e tagliare il potere di proteggere la batteria Lipoly da oltre dis-carica. L'interruttore POWER può anche informare circa la capacità residua e lo stato della vostra batteria.

Caratteristiche:
Viene fornito con un coperchio inferiore 2 per i diversi metodi di montaggio
Può operare in modalità Lipoly
Anche un rilevatore di bassa tensione e indicatore

Specifiche:
Tensione in ingresso: 4 ~ 12V
Protezione bassa tensione: 6,2 V (Lipoly)
Max. Corrente: 10A
Modalità batteria: NIHM / NiCd / Lipoly
Temperatura di esercizio: 0 ~ 50 ° C
Peso: <7g
Dimensione: 22.5mmx16mmx8.5mm

  • SKU 9052000074-0
  • Brand TrackStar
  • Capacità ( mAh ) -
  • Peso 16.0000
  • Lunghezza 70.00
  • Packaging Width 20.00
  • Altezza 40.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

I am testing these to power jets (2 in parallel with 2 batteries) and so far i am impressed. They are small and work perfectly. Shorting the pins on the receiver does not affect the switches so that is looking very promising.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I am testing these to power jets (2 in parallel with 2 batteries) and so far i am impressed. They are small and work perfectly. Shorting the pins on the receiver does not affect the switches so that is looking very promising.

exelent petit inter merci hk

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

exelent petit inter merci hk

Just received this switch, works well and I like the fact it has a Lipo setting to warn you when the voltage get too low. I was worry when I read the description that it will cut off, but it did not! I set it up on a voltage supply, at 8.0V the LED is green. At 7.6V the LED turned orange and the case is also illuminated. When the voltage lowered, the case illumination started to flash. When I turn the voltage to 4 volt,the switch is still on, no cut off. Also it let me turn on the switch.

The only negative part of this switch is the mounting method. If you are to use it on an airplane, the mounting lugs on the switch body will only allow you to mount it with the wires on the outside.

I am going to use it on the ignition system of the gas engine. Still scratching my head on how to mount the switch!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Just received this switch, works well and I like the fact it has a Lipo setting to warn you when the voltage get too low. I was worry when I read the description that it will cut off, but it did not! I set it up on a voltage supply, at 8.0V the LED is green. At 7.6V the LED turned orange and the case is also illuminated. When the voltage lowered, the case illumination started to flash. When I turn the voltage to 4 volt,the switch is still on, no cut off. Also it let me turn on the switch.

The only negative part of this switch is the mounting method. If you are to use it on an airplane, the mounting lugs on the switch body will only allow you to mount it with the wires on the outside.

I am going to use it on the ignition system of the gas engine. Still scratching my head on how to mount the switch!!

Good quality switch.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good quality switch.

great switch for the models that do not have lipo safe, you can use a lipo in any model that you have

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

great switch for the models that do not have lipo safe, you can use a lipo in any model that you have

Top Schalter ich Habe ihn in einen Mugen MRX4 verbaut mit einen 2S Lipo

und arbeitet dort ohne Probleme

( und ist auch noch Wasserdicht ) super.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Top Schalter ich Habe ihn in einen Mugen MRX4 verbaut mit einen 2S Lipo

und arbeitet dort ohne Probleme

( und ist auch noch Wasserdicht ) super.

ich habe den schalter in einem 1:8 buggy verbaut und macht dort gute dienste .

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ich habe den schalter in einem 1:8 buggy verbaut und macht dort gute dienste .

I ordered two of these. I always order two items of this nature from HobbyKing because most of the time only one will work. And that is the case here! One works and one does not work! And that's the way it is at HobbyKing. You are the Beta tester!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I ordered two of these. I always order two items of this nature from HobbyKing because most of the time only one will work. And that is the case here! One works and one does not work! And that's the way it is at HobbyKing. You are the Beta tester!

Gewicht 6,66g mit Stecker-Kabel 14cm und Buchse-Kabel 16cm

mit Bodenplatte 3 Befestigungsloecher 3,2mm - zweite Bodenplatte ohne Befestigungsloecher beiliegend

Abmessung 22,2 x 16,2 x 8,8mm (ohne Befestigungslaschen)

Abmessung 34,5 x 22 x 8,8mm (mit Befestigungslaschen)

Druckknopf arbeitet gut bei festerem Wiederstand

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Gewicht 6,66g mit Stecker-Kabel 14cm und Buchse-Kabel 16cm

mit Bodenplatte 3 Befestigungsloecher 3,2mm - zweite Bodenplatte ohne Befestigungsloecher beiliegend

Abmessung 22,2 x 16,2 x 8,8mm (ohne Befestigungslaschen)

Abmessung 34,5 x 22 x 8,8mm (mit Befestigungslaschen)

Druckknopf arbeitet gut bei festerem Wiederstand

Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!