New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Trackstar ™ TS-910 Digital 1/8 Truggy / Monster Truck Servo 30.6kg / 0.14sec / 66G

Trackstar ™ TS-910 Digital 1/8 Truggy / Monster Truck Servo 30.6kg / 0.14sec / 66G

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

33,93 €
Stato:
Disponibile
SKU:
922000035-0
WANT FREE SHIPPING? Click here to find out more!

servi brushless digitali, il massimo in termini di precisione e capacità di tenuta. Trackstar da Turnigy sa importanza portando una linea di servi brushless digitale per 1/8 e 1 / applicazioni per veicoli scala 10 °. Questi servi robusti presentano casi in lega, doppi alberi di uscita cuscinetti a sfera, e un treno di ingranaggi in titanio.

Per fornire le migliori prestazioni, più efficiente questi servi sono progettati per funzionare su una vasta gamma di tensioni da 6,0 fino a 7.4V. Nei test sono stati in grado di sopportare l'abuso delle corse su strada e off-road e ancora tornare per ulteriori informazioni.

Il TS-910 è un servo di dimensioni standard ideale per le applicazioni Truggy scala e monster truck 1/8 °. Includiamo bracci multipli servo diversi e un pacchetto completo di hardware di montaggio.

Specifiche:
Peso: 66g
Dimensione: 39mmx19mmx38.5mm
Coppia: 25.8kg.cm (6.0V) - 30.6kg.cm (7.4V)
Velocità: 0.16sec / 60deg (6.0V) - 0,14 sec / 60deg (7.4V)
Tensione: 6.0 ~ 7.4V
Motore: Giappone Brushless
Tipo: Digitale
Treno di ingranaggi: Titanium
Cuscinetto a sfere: cuscinetto a sfera N2
Lead Length: 300mm
Collegare: JR / Futaba

  • SKU 922000035-0
  • Brand TrackStar
  • Peso 135.0000
  • Lunghezza 120.00
  • Packaging Width 35.00
  • Altezza 70.00
  • Coppia ( kg) ( min . 0.01kg ) 30.60
  • Velocità ( Sec / 60deg ) 0.14
  • A ( mm ) 46.00
  • B ( mm ) 39.00
  • C ( mm ) 41.00
  • D ( mm ) 19.50
  • E ( mm ) 53.00
  • ( Mm ) F 29.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Bought two of these and put one in my wraith. Initally strong servo, centered well, decently quiet. Started to slightly glitch out on me and had to keep adjusting trim after any big bumps. Hit a root and it servo was toast, friends savox 1230 was still going strong and took way more impact. Hopefully the other one works better, but would not purchase again

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought two of these and put one in my wraith. Initally strong servo, centered well, decently quiet. Started to slightly glitch out on me and had to keep adjusting trim after any big bumps. Hit a root and it servo was toast, friends savox 1230 was still going strong and took way more impact. Hopefully the other one works better, but would not purchase again

I bought 6 and I'm using them in a 35cc MXS-R, I have about 20 flights on the plane, and so far working very well. great centering. using with 2 cell life. Will write another review when I have 50 or so flights.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I bought 6 and I'm using them in a 35cc MXS-R, I have about 20 flights on the plane, and so far working very well. great centering. using with 2 cell life. Will write another review when I have 50 or so flights.

It is a very good product.

Satisfied with the product.....

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

It is a very good product.

Satisfied with the product.....

Fits perfectly to kraton 1/8...

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Fits perfectly to kraton 1/8...

Great price. I'm not quite sure it hits 30 kg-cm of torque, but it's probably close. It seems very well built for the price. It runs warm, so I wouldn't recommend running it higher than 7.4V. By comparison, my RJX servos run cold even above the rated voltage, but these are half the price. I will definitely continue to buy these.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Great price. I'm not quite sure it hits 30 kg-cm of torque, but it's probably close. It seems very well built for the price. It runs warm, so I wouldn't recommend running it higher than 7.4V. By comparison, my RJX servos run cold even above the rated voltage, but these are half the price. I will definitely continue to buy these.

ottimo servocomando, ultra potente e preciso montato sul mio monstertruck allo sterzo mi garantisce il movimento delle ruote in qualsiasi condizione anche da fermo, inoltre abbastanza veloce e sufficiantemente leggero trova applicazioni anche su automodelli in scla 1/5 che montano servocomandi di dimensioni standard.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ottimo servocomando, ultra potente e preciso montato sul mio monstertruck allo sterzo mi garantisce il movimento delle ruote in qualsiasi condizione anche da fermo, inoltre abbastanza veloce e sufficiantemente leggero trova applicazioni anche su automodelli in scla 1/5 che montano servocomandi di dimensioni standard.

I did'nt get the servo yet but they look awessome hope they can be compare to other quality brand at that cheap price !!

Buddy code 93DE2E7A-66FF-4A19-9F2D-1FF854AB99D0

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I did'nt get the servo yet but they look awessome hope they can be compare to other quality brand at that cheap price !!

Buddy code 93DE2E7A-66FF-4A19-9F2D-1FF854AB99D0

muy fuerte gran potencia de gisro mi perro ya podra morden que esta ver no partira

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

muy fuerte gran potencia de gisro mi perro ya podra morden que esta ver no partira

I use this servo for throttle buggy 1/8 nitro and so good strong,,, BUT after run 10 minutes I check the temp more 60 degrees,, I don't know why !!!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

I use this servo for throttle buggy 1/8 nitro and so good strong,,, BUT after run 10 minutes I check the temp more 60 degrees,, I don't know why !!!

after I bought 3 times, now servo coming on my hands,
I took off bottom of case, then checked all are "alloy gears",
first gear is Aluminum steel,
second & third is brass stemless,
final shaft is Aluminum 7075 Hard anodized.
for your all people reference, waterproof is fine.
and Output is tooth Futaba type.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

after I bought 3 times, now servo coming on my hands,
I took off bottom of case, then checked all are "alloy gears",
first gear is Aluminum steel,
second & third is brass stemless,
final shaft is Aluminum 7075 Hard anodized.
for your all people reference, waterproof is fine.
and Output is tooth Futaba type.

  1. 1
  2. 2
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save