Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy 1/16 4wd nitro che corre carrozzino w / aggiornato .07 Engine (ARR)

Generating Links

Turnigy 1/16 4wd nitro che corre carrozzino w / aggiornato .07 Engine (ARR)

Prezzo:

Now save risparmia 0,00 € 0,00 €

126,95 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9249000379
Spedizione gratuita? Clicca qui per saperne di più!

Non lasciate che è piccolo sciocco dimensioni voi. Questo è un grave 1 / 16th Nitro Racer!

Abbiamo preso questo grande piccolo buggy nitro e reso ancora meglio con un aggiornato .07 motore! Il Turnigy 1/16 4wd nitro che corre carrozzino ora offre più potenza e una velocità massima più elevata, proprio quello che serve per soddisfare la vostra fame di potere appetito!

A partire da un giapponese fatto tirare avviare il motore nitro .07 CI, tubo sintonizzato, albero condotto quattro ruote motrici - con alberi puntello in acciaio e freno a disco, questo piccolo buggy zecche tutte le caselle. Ha una vasta gamma di regolazione, fuori dalla scatola, come ad esempio: braccioli regolabili superiori di controllo, ammortizzatore fulcro, ammortizzatore precarico, posteriore centro di rollio della sospensione e fermi regolabili verso il basso.

Un rapido sguardo sulle immagini dimostrerà la durata integrato e componenti sovra-ingegnerizzati, come i bracci delle sospensioni, ammortizzatori e paratie. E 'costruito più come un corridore in scala 1/10 di un 1/16 °!

Questa vettura arriva ricevitore pronto, completamente costruito con lo sterzo elevata coppia e servi della valvola a farfalla e installati tutti i collegamenti pre-regolato. Basta aggiungere il ricevitore, 4 batterie AAA, di carburante, un driver candela e il tuo pronto per il rock!

Specifiche:
Servi: 15g alta Micro Torque
Drive: Full Time 4WD, Doppia Diff
Larghezza: 187mm
Altezza: 101mm
Traccia: 191mm
Lunghezza: 280MM
Passo: 177mm
Rapporto di trasmissione: 11.2: 1
Motore:. 07 CI
Distanza dal suolo (F / R): 20-30mm

richiesto:
2 canale radio (TX / RX)
4 batterie AAA per il ricevitore
combustibili Nitro
autista candeletta

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Ralf | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 08, 2016

Car came quickly from european wearhouse. The Quality looks good. The car Ha metal Gear in front and rear. Very good. The engine starts good and I had a lot of fun
I had some Problems to put my Frsky Tfr6 Info the small RC Box but i sollen it. If you want to have a car with great fun factor, buy it. The Price and the Quality is good.

olivier | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 31, 2016

recus hier deja en rade lanceur obsolete au vu des commentaire c'est un probleme recurrant .et depuis le temps aucune modification apporter par les concepteurs sa craint et n'augure rien de bon pour la suite.aussi faire TRES ATTENTION AU PIN LORS DU DEMONTAGE DES ROUES!bref c'est mon deuxieme achat et deuxieme deception(moto 1/5 nitro qui a jamais demarrer)quand au sav ne parlant pas anglais

anthrax66 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 05, 2015

Except for the pull-start mechanism, the vehicle is built for quality and endurance. Be sure to order some spare clutch and clutch covers, as well as spare pull-starter mechanism for replacements in time of need. When adjusting the carburettor needles, be sure that the tires of the car can run free.

Adrian | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 19, 2015

The are generally is good. The One way bearing is in deed rubbish. I replaced it with a Japanese H408 and it is a perfect. you may need to seal the fuel tank cap and nipple on the cap and seal the engine backplate and exhaust all the way to the tuned pipe as it leaks everywhere. I founf the header o ring was pinched when I did the reseal. Replaced the O ring. If you do an upgrade on the suspension C-Hub and knuckles, be sure to lock tight them as I have lost the screws and all metal it does not bite and will work loose by itself. If you over tighten them, then there is no freeplay. Also do change out the wheel hubs to metal, it is so much smoother. I got a 2 speed gear box and it is really fast. Besure to keep some spur gears as spares as it wears out pretty quick. I have lube all differential gears with only Vaseline petroleum based grease and it works wonders. If you car leaks do seal them. The high speed needle (HSN) is around 2,5 turns from closed.

Adrian | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 29, 2015

I like the car and it is fast with the 2 speed gearbox. the clutch sprint is rubbish and the starter recoil slips. The fuel tank cap leaks under pressure. There is no chance you can adjust the 2 speed shift as once you do it, you will screw it up. leave it stock. Running with 15pcnt nitro and no.8 glow. Idles well and accelerate well. Handling on road is good.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Feb 05, 2015

just purchased it today, cant wait for it to arrive and start it up :)

ABCXYZ | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 03, 2015

Very satisfied.
For reliable actuation, OWB was replaced in made INA.
Was to facilitate the start-up by changing the Roto Start.

Upload in soon, to see the FILES.(116NB-LOTO1 ~ 4 photos.)

Zachary | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 04, 2014

Unpacked from box and everything but the clutch to spur gear mesh was perfect. Screws were all nice and tight, linkage was well adjusted. Using the Hobbyking GT2 tx/rx combo. RX box on buggy is small so the small RX that comes with the combo fits perfectly. great buggy for a great price!

Samuel | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 01, 2014

Awesome little buggy!! The model is easy to start and the engine is really permisive. It will run as rich as you may want, making the engine breaking procedure really easy. I would recommand to anywone buying this model (or any prebuilt model) to clean and lubricate both differentials and chang the shock oil (27.5w work perfect). The only breakage that occured in the first 5 tanks, was the throtle servo horn (my fault... I had a spare in the kit anyway) and a clutch spring. I've replaced the clutch spring with a 0.88mm coming from a 1/8 buggy.



Spare parts to have : servo horn, clutch springs, and glow plugs.



The rest should be good unless you smash the thing at every objects in his way.

Taylor | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 17, 2014

I love this buggy!
What a fun little car! I have been out of nitro for 5 or so years so this is a great way for me to get back into the hobby! It screams up and down my street. While I have broken a few parts, it was always my fault (like running into a car tire)
Pros:
Shares parts with kyosho mini inferno
cheap
fast
jumps well
good handling
Strong enough for a good driver.
(if you crash hard into stuff it will break)
Cons:
parts in US take time to ship
brakes could be stronger (adjusting stock linkage helps but it needs a better servo, going to swap in a HS55 soon)

using to much after run oil makes the pull start OWB slip, but its easy to fix, just pull the glow plug out and FLOOD the block with nitro fuel for a minute or so... Then drain the fuel out and your off!
Overall cant beat it for the price!

  1. 1
  2. 2
  3. 3
File dei clienti
Manual Download [5263]
Manual Download [5263]
No File Name Download [1044]
OWB replacement idea Download [59]
Exploded wiew 2 Download [103]
Exploded wiew 2 Download [101]
Exploded wiew 1 Download [98]
OWB replacement idea Download [59]
29488762X1146429X49.pdf Download [5263]
picco p zero stock engine Download [1197]
  1. 1
  2. 2
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!