New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy 1257TG Digital Titanium Gear Servo 57g / 10,5 kg / .09sec

Turnigy 1257TG Digital Titanium Gear Servo 57g / 10,5 kg / .09sec

Discontinued Product

Please continue searching for a similar product.
Peso:
162 g
SKU:
TGY-1257TG
WANT FREE SHIPPING? Click here to find out more!

* Perfetto per l'uso come servo ciclico per l'elicottero .50 ~ .90 dimensioni

Modello: TGY-1257TG
Tensione di funzionamento: 4.8V / 6.0V
Corrente di funzionamento: 300mA / 400mA
Velocità di funzionamento: 0.10sec.60º / 0.09sec.60º
Coppia di stallo: 9.0kg.cm /10.5kg.cm
Dimensione: 40.3X20.2X37.2mm
Peso: 57g
Banda morta: ≤2uSec
Motore: Tipo Coreless
Cuscinetto a sfera: 2BB
Equipaggiamento: Titanio
Filo connettore: 300mm
Collegare: JR Tipo
Range di temperatura: -20 ° C + 60c

  • SKU TGY-1257TG
  • Brand -
  • Peso (g) 162.00
  • Lunghezza 114.00
  • Larghezza 31.00
  • Altezza 76.00
  • Coppia ( kg) ( min . 0.01kg ) 10.50
  • Velocità ( Sec / 60deg ) 0.09
  • A ( mm ) 41.00
  • B ( mm ) 40.00
  • C ( mm ) 38.00
  • D ( mm ) 20.00
  • E ( mm ) 55.00
  • ( Mm ) F 25.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

This servo seems very well built with impressive speed, centring and resolution. I haven't run it long enough to warrant a full review but so far it looks promising. A great alternative to any Savox or Hitec high-speed servo.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

This servo seems very well built with impressive speed, centring and resolution. I haven't run it long enough to warrant a full review but so far it looks promising. A great alternative to any Savox or Hitec high-speed servo.

Bought a shedload of these, have them in my Seagull Yak, one of the elevator servos died on the ground. They however do center well, and are very fast on 6.6v LiFE.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Bought a shedload of these, have them in my Seagull Yak, one of the elevator servos died on the ground. They however do center well, and are very fast on 6.6v LiFE.

Ich habe das Servo bei einem Mugen MRX-4 X auf der Lenkung verbaut und es macht dort sehr Gute arbeit,

habe das Servo ein Ganzes Jahr gefahren ohne Probleme.

ein TOP Servo zum guten Preis

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich habe das Servo bei einem Mugen MRX-4 X auf der Lenkung verbaut und es macht dort sehr Gute arbeit,

habe das Servo ein Ganzes Jahr gefahren ohne Probleme.

ein TOP Servo zum guten Preis

Das ist ein Top Servo
ich habe es in einem Mugen MRX 5 verbaut
es macht in meinem Auto sehr gute arbeit
ohne Probleme
und werde es in meinem neuen Auto auch einsetzen

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Das ist ein Top Servo
ich habe es in einem Mugen MRX 5 verbaut
es macht in meinem Auto sehr gute arbeit
ohne Probleme
und werde es in meinem neuen Auto auch einsetzen

Another great product , runs fantastic with lots of power , quick . Love it . Runs cool and hasent let me down.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Another great product , runs fantastic with lots of power , quick . Love it . Runs cool and hasent let me down.

Ich benutze sie als Taumelscheiben Servo in meinem Logo 550SE. Bis jetzt bin ich mit den Servos sehr zu frieden, haben fast kein Spiel und sind sehr stellgenau. Ausserdem haben sie mehr als genug Kraft und schnell sind sie auch noch.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Ich benutze sie als Taumelscheiben Servo in meinem Logo 550SE. Bis jetzt bin ich mit den Servos sehr zu frieden, haben fast kein Spiel und sind sehr stellgenau. Ausserdem haben sie mehr als genug Kraft und schnell sind sie auch noch.

Hi, i use these on my HK550GT and these servos are the best i ever had till now (for this price). I have used spacers for clearance (they are just a bit too long - F size) Will mount the same on my HK600GT heli for cyclic too. The servos are fast, strong, precise and not so loud. Will definitely buy more. Bye

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Hi, i use these on my HK550GT and these servos are the best i ever had till now (for this price). I have used spacers for clearance (they are just a bit too long - F size) Will mount the same on my HK600GT heli for cyclic too. The servos are fast, strong, precise and not so loud. Will definitely buy more. Bye

So far I'm pretty impressed with these servos. They look well constructed and have a good length lead. I love the metal box they come in, very classy. The servo arms fit well with a firm push, so no slop there. All 3 ran on the bench for over half an hour at 30pcnt speed (using the CX-3X1000 program box). They are quiet and smooth. The servo was only luke warm after this. Deadband is excellent and so in centering. The speed test at 5.5 volts showed 0.086, so better than specs above. Just the tiniest bit of slop in the gears, but my Align servos have as much as this. So far I'm pretty convinced this is a clone of the Savox servo, and hence the number. Great value, so far. I'll update below as I progress further.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

So far I'm pretty impressed with these servos. They look well constructed and have a good length lead. I love the metal box they come in, very classy. The servo arms fit well with a firm push, so no slop there. All 3 ran on the bench for over half an hour at 30pcnt speed (using the CX-3X1000 program box). They are quiet and smooth. The servo was only luke warm after this. Deadband is excellent and so in centering. The speed test at 5.5 volts showed 0.086, so better than specs above. Just the tiniest bit of slop in the gears, but my Align servos have as much as this. So far I'm pretty convinced this is a clone of the Savox servo, and hence the number. Great value, so far. I'll update below as I progress further.

ciao



servo clone del SAVOX 1257tg

con la "piccola" differenza che costa la met...



forte, resistente, veloce



ottimo servo per elicotteri classe 550, 600 e forse anche 700



ciao ciao

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

ciao



servo clone del SAVOX 1257tg

con la "piccola" differenza che costa la met...



forte, resistente, veloce



ottimo servo per elicotteri classe 550, 600 e forse anche 700



ciao ciao

By far these are the best servos I've ever bought here. I installed three of them in my TT X-50's swashplate.The response is fast enough to fly 3D, but not radically fast, so you can fly f3c too.
The servos I changed over were futaba 3050's. I keep these hk's in use.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

By far these are the best servos I've ever bought here. I installed three of them in my TT X-50's swashplate.The response is fast enough to fly 3D, but not radically fast, so you can fly f3c too.
The servos I changed over were futaba 3050's. I keep these hk's in use.

  1. 1
  2. 2
Customer files
my ca30 Download [875]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!