Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

1500kv Turnigy 2730 Brushless Motor

Generating Links

1500kv Turnigy 2730 Brushless Motor

Prezzo:

Now save risparmia 0,00 € 0,00 €

12,96 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
T2730-1500
Spedizione gratuita? Clicca qui per saperne di più!
Dimensioni: 32mm x 27mm, 43 millimetri (con albero)
Peso: 26g (kv1500) (non compresi i connettori)
Diametro del pozzo: 3mm
Lunghezza di albero anteriore: 10mm
Spessore laminazione:. 2 millimetri
Tipo di magnete: 45SH
Spinta: 290 ~ 410g
Prop: 7x3.5 o più piccolo
ESC: 10A
Max corrente: 4,5 ~ 8A
Le celle Lipo: 2-3S



Scaricare file di dati:
TURNIGY DATI MOTORE

  • Kv ( rpm / v ) 1500.00
  • Correnti Max (A) 9.00
  • Resistenza ( mh ) 0.20
  • Max Tensione (V ) 13.00
  • Potenza ( W ) 110.00
  • Albero A ( mm ) 3.00
  • Lunghezza B ( mm ) 32.00
  • Diametro C ( mm ) 27.00
  • Can Lunghezza D ( mm ) 7.00
  • Lunghezza totale E ( mm ) 42.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Biotech | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 21, 2016

very nice motor, well designed and very durable, because of it's mounting system

Phil | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 18, 2016

Turnigy 2730 1500kv / 3S 8x4,5 Folding Aeornaut Propeller. Installed in a 1,20m EPP Fox-like Foamie. Works after more than 30 flights and even survived some crash landings! *Thumbs up*

https://www.youtube.com/watch?v=k4bPxFAO5Aw

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jan 09, 2016

Cute little one for my special 1meter fpv wing!

shane | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 06, 2016

Bought motor a while ago only just got round to using it but I would recommend the motor for the price it's a great little motor

Tim | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Sep 12, 2014

I have one of these on a flying wing and it performs just great. For it's size it has got a lot of punch.

Doesn't seem to get too hot or drain the battery too fast. I am looking around for components for a mini quad and I think that these would be great.

The best thing about this product is the hardware kit you get with it. Even heatshrink! And yes the propsaver does work nice too if you have the right prop on there.

Recommended

cardas | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 27, 2014

suoer engine for small parkflayers or 3D flayers

Phillip | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 30, 2014

I like the off red shiny color, with the black strip around the magnet ring. Be careful with the set screw(s) that tighten the motor to the motor mount, they can come out - so keep tight during test runs or vibration can send them falling out.

Also be careful with the wires coming from the motor - I kept bending them to put the motor in and out of a pretty little box, and eventually broke one wire very close to the motor winds, and had to solder it, which was a very minute and delicate operation.
Discovering the broken wire was more difficult, as I thought I had fried the
10A plush ver 3.1 bulletproof esc- with defaults (motor takes a sec to start)
3mm motor shaft - (3.17 bullet prop saver work but can pinch-jam on use wd40 to loosen back collet from cross collapse)
Using a nano 300 2S with 35-70 discharge, and currently a
8x4.3 black plastic cheapo prop - 3D home built 19" wingspan based loosely on slowfly28.

Hovers it nicely and plenty of power for straight up - ready to fly weight w battery and prop is 137 grams.

juli9797 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 11, 2014

Very good motor! I use 8*4 Prop and it drains 9A on full throttle and 3s lipo.
Only the wires on the motor break easily.

Capt. Peter | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jun 10, 2014

These are cracking little motors! I thought i'd try these rather than sticking to the Blue Wonders and although slightly different style they perform just as well! I use x4 of these with 7030 tri blade props on 3s. They warm up but don't overheat. They run consistently with each other and have bags of thrust! **As with any new motor, always check that the mount screws are sufficiently tightened!**

Evil Pusher | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Apr 12, 2014

Sehr guter Motor - Preis / Leistung ist gut. Immer schn, wenn die Stecker schon dabei sind..

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Related Tags