TURNIGY 28-30-AZJ 14A 1100Kv Brushless Outrunner

• Overall
• Quality
• Value

Customer Rated

May 03, 2011

Trs fragile, le support de l'axe est simplement coll dans la cage, et ce parfois de travers
L'axe est trs fragile, facile a plier.

Sur 5 achets, 2 bons, 1 bruyant, 1 dsax et un dont le filtage tait inutilisable.

Very fragile, the support of the shaft is simply stuck in the body, and sometimes it's awry
The shaft is very fragile, easy to bend.

Purchase 5 of these motors, 2 are good, 1 is noisy, 1 has an unusable filtage of the shaft

• Overall
• Quality
• Value

Certified Buyer Rated

Apr 09, 2011

It's very nice finish and good quality. The motor is not bad but the shaft is too fragile. After use for sometime and few time the bearing make noise. It's pity I can't find the shaft replacement part

• Overall
• Quality
• Value

Customer Rated

Apr 07, 2011

I purchased 5 of these and installed 4 on a Quadcopter. I am using 10x6 props and they pull it off the ground at less than 1/2 throttle.
The quadcopter weight is 3.5 lbs. Lots of extra power available and no problems with any motor. Only part I changed is the two mounting bolts which hold the motor to the mount. They are hex head set screws and I replaced them with regular hex head screws. They draw about 9 amps each at 1/2 throttle.
Allen

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 27, 2011

Tento motor je za tu cenu dobr,len nalisovanie driaka hriadela je dost chabe.Pri tvrdom pristati nemusi vzdy vydrzat.

• Overall
• Quality
• Value

Customer Rated

Mar 26, 2011

Great little motor, tons of power am using it on a super cub with aelorons added with at 30A blue series ESC from HK and a 10x8 prop. They plane will go verticle if I need it to. Motor is just amazing for such a tiny package. I also ran a 10x6 prop but jumped to the 10x8 to see how the ESC would handle it and it barely gets warm. For the money you can't beat this motor. I am buying more.......

• Overall
• Quality
• Value

Certified Buyer Rated

Mar 04, 2011

empeado en un avion de 700 gr con una lipo 2S de 2200 y esta sobrado de potencia

• Overall
• Quality
• Value

Customer Rated

Mar 01, 2011

28/02/2011
comprei este motor para usar em um piper 1,2m de env., o motor bastante forte e econmico, alm de ser uma boa opo a um custo baixo!

• Overall
• Quality
• Value

Certified Buyer Rated

Jan 14, 2011

Looking for a small engine and verry powerfull,here it is:TURNIGY 28-30-azj 14A 1100Kv,but be verry careful,to not hit him on the ground buecouse was put him on my new prototip plane,made by my self and the engine has suffered somme crashes and the bearings now are not centred and the engine now make a nasty sound,so be carefull and do not make mistakes like me,i want to say that the engine is werri well made,and the shaft is ok,only two times the shaft hit the ground but is ok.....verry resistent.

• Overall
• Quality
• Value

Customer Rated

Dec 14, 2010

I tested this motor on a biplane with 25 A SS ESC, 10 x 3,8 SF prop and 1 800 mAh Zippy. Total weight ~ 700g. Not enough power to hover. The motor is hot. I will try a 10 x 4,7 SF prop. I am sure the temperature will be too high.

I will do individual bench tests to log more data.

• Overall
• Quality
• Value

Certified Buyer Rated

Dec 07, 2010

This little motor works great in my Slo-V....even on a 2s it pulls very strong!