Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy 3500KV 2815 EDF Outrunner per 55/64 millimetri

Generating Links

Turnigy 3500KV 2815 EDF Outrunner per 55/64 millimetri

Prezzo:

Now save risparmia 0,00 € 0,00 €

12,15 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
T28151C3500
Spedizione gratuita? Clicca qui per saperne di più!
Turnigy 3500KV 2815 EDF Outrunner per 55/64 millimetri
Specifiche:
kV- 3500
Dimensioni: 51 x 28mm
Albero: 2.3 / 3,0 millimetri
Voltaggio: 11.1V
Peso: 74g
Corrente a vuoto: 1.9A
A vuoto RPM: 38460
Corrente di carico: 17.8A
Carico RPM: 32780
Spinta: 485g
Foro di montaggio foro circolare: 18mm
Mtg. Hole Numero & Dimensioni: 4 x M2.5
 
Include 2 alberi, 2.3 & 3.0mm
  • Kv ( rpm / v ) 3500.00
  • Correnti Max (A) 1.96
  • Resistenza ( mh ) 36.00
  • Max Tensione (V ) 12.00
  • Potenza ( W ) 19.60
  • Albero A ( mm ) 3.00
  • Lunghezza B ( mm ) 48.00
  • Diametro C ( mm ) 28.00
  • Can Lunghezza D ( mm ) 17.00
  • Lunghezza totale E ( mm ) 64.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

SirBiggles | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Apr 19, 2012

I have a put a post in the forum with stats for this motor a few of its brothers and sisters but ill put them here too. Motor is good quality and I think will run on 4S fine if kept under 500W.

3S 64mm 5 Blade Fan 19A, 220W, 11.7v 450g thrust (in plane)

4S 64mm 5 Blade Fan 30A, 450W, 11.7v 640g thrust (in plane)



3S 64mm 6 Blade Fan 19A, 216W, 11.45v 480g thrust (in plane)

4S 64mm 6 Blade Fan 29.5A, 430W, 14.8v 640g thrust (in plane)

Cliente | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jun 10, 2010

I bought 2 of these for a GWS-262. I use 2 25A tower pro ESCs and a turnigy 2200mah lipo. Its too much for the lipo, it gets hot and puffed out. I'll try a 2600 mah next. Great motors, lots of power. Great value.

Cliente | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

May 28, 2010

Looks are good, some flaws.

I had to rebalance both of my motors, I needed lots of CA to balance them but after balancing they ran fine.



Axles supplied with motors were 2.3mm , 3mm and 3.3mm , but 3.3 mm will not fit because the hole is already almost too tight for 3mm axle!

I had to use brute force and hammer to get 3mm axle of and install 2.3mm.



Real life performance will tell more.

khess | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

May 08, 2010

Motor appears to be of good quality. On a GWS 64mm, 6-blade fan, Hyperion 3S 2500mAh 25C, Phoenix 25A ESC-low timing, I was pulling 22 amps and 239 watts at 11 volts WOT. Sorry no thrust data, but holding the unit in my hand produced impressive thrust for a 64mm fan. The website says 17.8 amps as 'load current'. If I understand that to mean max continuous, than a five blade fan may be better. No thrust data, but impressive for 64mm unit.

| Acquirente verificato

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 04, 2010

Awesome motor, 540W on peak with a 5*5 prop and a 3S 1600 35C hyperion.

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!