Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy 4800kv 2815 EDF Outrunner per 55/64 millimetri

Generating Links

Turnigy 4800kv 2815 EDF Outrunner per 55/64 millimetri

Prezzo:

Now save risparmia 0,00 € 0,00 €

13,89 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
T28151A4800
Spedizione gratuita? Clicca qui per saperne di più!
Turnigy 4800kv 2815 EDF Outrunner per 55/64 millimetri
Specifiche:
kV- 4800
Dimensioni: 51 x 28mm
Albero: 2.3 / 3,0 millimetri
Voltaggio: 11.1V
Peso: 73g
Corrente a vuoto: 3.2A
A vuoto RPM: 55560
Corrente di carico: 39.6A
Carico RPM: 42560
Spinta: 750g
Foro di montaggio foro circolare: 18mm
Mtg. Hole Numero & Dimensioni: 4 x M2.5
 
Include 2 alberi, 2,3 e 3,0 mm
  • Kv ( rpm / v ) 4800.00
  • Correnti Max (A) 39.60
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 11.00
  • Potenza ( W ) 0.00
  • Albero A ( mm ) 3.00
  • Lunghezza B ( mm ) 51.00
  • Diametro C ( mm ) 28.00
  • Can Lunghezza D ( mm ) 18.00
  • Lunghezza totale E ( mm ) 65.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Benjamin | Acquirente verificato

  • Quality
  • Overall
  • Value

weight

Jul 05, 2017

what's the pure weight of this motor?

Hafiz | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jan 21, 2014

Very good motor with 5 blade 64edf setup with 60amp ESC and 2200 40c battery. Test result Watt: 480watt @ 42amps. Well balance and good performance with 4 flights.

Thatslife78 | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jun 21, 2013


reveived with 2 more shafts : a 2.3mm and the stock 3 mm

shaft A (mm) 3mm
outrunner part diameter 32 mm
Length B (mm) 50.5
Diameter C (mm) 28
Can Length D (mm) 18
can diameter next to shaft 20mm
Total Length E (mm) 65

plugs are 3.5mm diameter, wire length is 75 including plugs

No screws given, difficult to find them in my screw box

perfectly suitable and mountable in an HK EDF Ducted Fan Unit 2.5inch 5 Blade product number 11163n and propeller is a replacement part for the JET-TIGER

Cody f86saber | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jun 09, 2013

I use this motor in the Dr. Mad Thrust 50mm 10 blade EDF. With a half charged 3S 11.1v 30C Rhino pack, this motor pulls 33A, and more on a new pack that is charged. The motor is quite large, runs fairly balanced and as far as I can identify, is the same as ExceedRC's 4800kv motor right from the machined bearing housing to the bell. The magnet bell and shaft can be pulled out to facilitate changing the shafts that are included. The shaft is held in with a set screw and will require a 1.5mm hex wrench. Removing a shaft will take some work, just be careful not to bend the shaft as you remove it. I hold the shaft in a bench vise and grab the magnet bell and twist axially. It will turn free with enough force. I will definitely buy another, it is a nice working motor that I would feel comfortable using in 64mm five & six bladed EDFs.

akin agrag | Acquirente verificato

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Apr 21, 2013

motorun 3s oldugu syleniyor 4s le calistiranlar var celiski !!!

bill987 | Acquirente verificato

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Jan 31, 2013

Tres Bon moteur puissant. Mis sur un Phazer HK Il faut juste commander les bis pour la fuxation

mikec@aloha.net | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Dec 21, 2012

compared this motor to value hobby's edf 4800kv motor. both perform about the same. value hobby edf seems to have a little more punch. this edf is smooth from start to finish. depends on the pilot too. i'm using it with a 64 mm 7 blade fan with a 3s 40c 2250 Rhino battery. not even half throttle needed to send this plane high. i put it on a glider which works great for my needs. it also sounds great with a 7 blade fan.

brutal | Acquirente verificato

  • Quality
  • Value
  • Overall

Certified Buyer Rated

Sep 24, 2012

great product ..thanks hk

Lorenzo | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jul 17, 2012

Ottimo motore. L'ho montato sul mio L39 Electrifly con una ventola da 64mm e sono rimasto molto soddisfatto. Velocissimo e il jet riesce a salire in verticale per molti metri anche se non all'infinito...Con una 64mm consuma circa 49 ampere

Discus2a | Acquirente verificato

  • Quality
  • Value
  • Overall

Customer Rated

Jul 15, 2012

Wow, excellent motor! Got this on the stock 5 blade 64mm EDF with around 750-800 grams of thrust using just a 3S 20C lipo (should be higher, 40C better!!)... Amazing! Good build quality. I will post the Amps and Watts later on, still got to receive the watts meter. Highly recommended for anyone wanting to upgrade their stock EDF without the extra costs of 4S batteries and without cutting away EPO for a bigger fan!

  1. 1
  2. 2
  3. 3
  4. 4
  5. 5
  6. ...
  7. 7
File dei clienti
2815 4800kv 50mm 10 blade EDF Download [47]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!