Registrati

Product Finder

Impostazioni

Useful links

Chat dal vivo
 
[["US","AU","GB","DE"]]
Registrati
Shipped From:
  • Global
  • USA

Turnigy 3 Funzione CDI Maestro remoto - visualizzazione tensione - Ricevitore Switch (No BEC)

Turnigy 3 Funzione CDI Maestro remoto - visualizzazione tensione - Ricevitore...

Discontinued Product

Please continue searching for a similar product.
Stock:
OUT OF STOCK
Peso:
65 g
SKU:
373000006
Descrizione
prodotto

Questo switch è dotato di un ricevitore integrato ultra la luminosità del display ad alta tensione della batteria del ricevitore che è chiaramente visibile in luce diretta del sole LED.

Inoltre questo interruttore incorpora un controllo CDI interruttore generale di accensione a distanza come una caratteristica maggiore sicurezza per gli utenti dei motori a gas.

potere CDI indipendente e prese di alimentazione del ricevitore. La potenza del ricevitore è completamente isolato dal circuito di potenza CDI, quindi non c'è alcun rischio che il segnale ad alta frequenza CDI interferirà il ricevitore.

L'interruttore ricevitore stesso è valutato come 15Amps continuo.

Nota: No BEC - tensione di ingresso è uguale tensione di uscita

Specifiche:
Canali: 1 (AUX) per accensione CDI Interruttore
Tensione in ingresso: 5-6V
Interruttore limitazioni: 15Amps RX; 5Amps CDI
Tensione di uscita: Stesso come input
Peso: 42g
Volume: 40mm x 27 millimetri x 35mm

Product
Specifications

Ulteriori informazioni

  • SKU:
    373000006
  • Brand:
    N/A
  • Peso (g)
    65.00
  • Lunghezza
    105.00
  • Larghezza:
    45.00
  • Altezza:
    83.00
Community
Discussions
Rate&
Review

Scrivi la tua recensione

Only registered users can write reviews. Please, sign in or sign up

verified_user Quality
trending_up Value
playlist_add_check Overall
Love the voltage display - never guess again. Bonus CDI control!
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1) It would be good solution to improve the way of solder wires. They should be better supported and isolated against vibration. Everyone, who decided to use this switch in their rc plane, before instalation, should use a drop of hot glue or silicone to hold wires in place.

2) switch's body, made of aluminium, is a little bit heavy. In case of bigger airplane, the place of instalation have to be reinforced and screws secured against becoming loose due to high vibration.

Those two points above are very important to avoid a troubles in the air !!!
I am telling this on the base of my own experience !!! I almost lost my 2m CAP232 due to broken wire.

3) The led indicator for CDI, visible in switch whole is hard to see, specialy in bright sun. It would be a best solution to place the led in better visible position on front panel (near display i.ex.), instead inside the switch.
verified_user Quality
trending_up Value
playlist_add_check Overall
verified_user Quality
trending_up Value
playlist_add_check Overall
1 lack of crown on quality. the main switch is not perfectly soldered. The solder points are not hidden and it is.easy to fix.



I figured the function out, there is no manual available.



Connections:

1. Leftmost wire goes to rx. i.e. say channel 6.

2. 2:nd from left goes to a 4.8V radio battery or BEC (5 or 6V).

3. 3:rd from left goes to optional consumer. CDI, smoke pump, lights or whatever.

4. Rightmost wire goes to optional power supply. This one may possibly handle more than 6V .. will check that out soon .. would be nice if you could connect a 3S battery directly to power any cool stuff.



Function:

A. Main switch switches power from 2 to 1 and lits the voltage meter. The meter shows rx battery voltage.

B. The optional tx controlled switch is always off at startup regardless of the state tx switch is positioned. Guess that this is for safety reason and no ignition should be on at start up. The optional switch is then toggled from tx switch. Feels a little strange that on/off could be either way depending on first state of switch arm. A hidden LED behind the main switch is illuminated red when CDI power is on, could be visible in the main switch hole. If you like you may desolder this led and wire it to a more convenient location, but it works nice the way it is.



note. the remotely swiched output is 0.2V below its input voltage, a standard, completely normal t
verified_user Quality
trending_up Value
playlist_add_check Overall
Upload
Videos
Upload video
Upload
Files

Only registered users can upload files. Please log in or register to start helping your fellow hobbyists today!

Tag prodotto

Usa gli spazi per tag separati. Usa apostrofi singoli (') per frasi.