Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy 3560-1650 90 millimetri FES Brushless ventola del motore

Generating Links

Turnigy 3560-1650 90 millimetri FES Brushless ventola del motore

Prezzo:

Now save risparmia 0,00 € 0,00 €

37,95 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
9244000011-0
Spedizione gratuita? Clicca qui per saperne di più!

Avete il bisogno di velocità o semplicemente ami come il suono 90 millimetri di EDF più simile a una turbina poi un asciugacapelli! Turnigy ha il motore FES per voi un outrunner 35 serie realizzata per una cosa in mente SPINTA!

Il 3560-1650 ha un cono di coda in lega e ventola di raffreddamento aerodinamico integrato, costruito in un unico pezzo. Il massiccio albero di 5 millimetri ha un lavorata appartamento in un'installazione girante libera sicuro preoccupazione ed è supportato da 11mm cuscinetti uguali dimensioni! Si può essere o di oca o di Maverick fuori al campo, ma alla fine della giornata motori FES il 90mm Turnigy non averti fiammeggiante fuori!

Specifiche:
Kv: 1650
Corrente max: 53 ampere
Potenza massima: 1900 watt
Idle attuali 4.6 Ampere
Resistenza: 0,4 mh
Shaft Dia: 5mm
Peso: 168 grammi
ESC consigliato: 70A o più grande
Celle: 4-6 cellule (lipoly)
Montaggio: 25 x 25mm
Connettori: 4mm

  • Kv ( rpm / v ) 1650.00
  • Correnti Max (A) 53.00
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 22.00
  • Potenza ( W ) 1900.00
  • Albero A ( mm ) 5.00
  • Lunghezza B ( mm ) 65.00
  • Diametro C ( mm ) 35.00
  • Can Lunghezza D ( mm ) 32.00
  • Lunghezza totale E ( mm ) 83.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

C Eric | Acquirente verificato

  • Overall
  • Quality
  • Value

3560-1650 of limited use for EDF

Nov 28, 2016

Ran 6S with a Haoye 7 blade 90mm fan. After only brief periods of WOT the motor temp would continue to rise to unsafe levels. Temp was over 195F with approximately 30 WOT. this was pulling 83amps/1700watts in cold weather with a cold battery.This motor will fry if running 6S and a high blade count fan. It may be OK on 5S but then only good for a very light 90mm jet.

4stripes | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 08, 2016

When running a typical 6 blade (wemo midi style) 90mm EDF it only produces less than 1300watts peak at 54amps on 6S. Motor bell was restricted in cooling with its fairing hole so small. Removed fairing for better cooling yet it still reached 130F drawing only about 1250watts for a short period.Only would be good for a very light model on 6S. 7S would likely give better performance.

alibaba_1780 | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 01, 2016

Turnigy EDF 3560-1650 90mm Brushless Fan Motor bike is great for jet,, I use in my home-made jet planes, power generated by the motor Turnigy EDF 3560-1650 90mm Brushless Fan Motor is unusually large, jet aircraft can lift with 4 kg

Richard | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 22, 2016

Used this motor with a ducted prop 180X200. Produced 22N static thrust with 80A using a Rotorstar ESC fed from 5000mAh 4S 30C battery. Nice motor when new with incredible power to weight.

The long thin case is prone to poling so very short life at full power. Poling so severe that one of the magnets was chipped.

EDWARD | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Mar 18, 2015

Finally did some test on this motor. All on 6s.
full charged 40C 4400mah. EDF unit: flyfly 7-blade, esc low timing, ~85 A, motor got ~160F after 1 min full throttle
new 5000mah 40C at 22.9 V. EDF: flyfly 6-blade, esc high timing, ~65 A. ~1400W. motor got warm but not hot after ~10 sec. No thrust data for either. Would expect ~70A at fully charged 44000mah battery.
Seems decent motor. Will soon put on Freewing F-18 for a flight test.

guitarPlaya | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Nov 29, 2014

I put this motor in my Fly Fly F-100 6s400090c flight pack and this motor makes this plane vertical right after takeoff!!
Get one!!

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!

Accessori