Il TURNIGY 3A UBEC utilizza la tecnologia switching per ottenere un rendimento molto più alto di un BEC lineare, questo significa meno calore e durata della batteria. Il UBEC è dotato di un alloggiamento in lega di riduzione del rumore per ridurre ulteriormente il rumore. Non corretta polarità caratteristica di sicurezza garantisce la UBEC non sarà distrutta Se la batteria viene collegata in modo non corretto.
• Oltre attuale e sopra protezione contro il calore.
• commutazione 300kHz frequenza.
• l'efficienza del circuito integrato 92%
• alloggiamento in lega di riduzione del rumore
Uscita: 5V / 3A o 6V / 3A (selezionabile)
Rumore: <50mVp-p (@ 2A / 12V)
Input: 5.5V-23v (2-5S Lipo pack, 5-15cells NiMh)
Capacità ( mAh )
I have over the time used about >20 of these in different applications, ranging from powering my R/C plane receivers to powering the USB smart phone charging socket retrofitted in my car to powering the navigation display in my full size plane. None has ever failed. They are small and live up to the specs (3A), while providing a reasonably ripple free voltage that does not interfere with any of the radios involved, be it 35MHz, 118KHz or 2.4GHz. Great product! It's a pity they are on backorder for months now, else I had already ordered another 10 or so.
Be aware there are cheap replicas out threre on ebay and elswhere! Due to lack of originals, these cheapo fakes are starting to show up in regular shops, and since some fakes are of a pretty poor quality, they harm the reputation of the original! Hobbyking, do something about it, have a new batch originals made ASAP!Watch out, this thing still drains the power even after your on/off switch is off !! I've lost 2 batteries before understanding what was wrong. So you must unplug the ubec or your batteries after use.
I've installed this Ubec on my radio transmitter to get a constant 6v from 2s lipo but unfortunately all my lipo died (under 2v each cell) after a few weeks of NON use. The ubec was pluged between the lipo and the power switch.Great little UBEC. I like that you can pick the input voltage. Light weight and relatively small in size. Used this in both 2s and 3s powered planes. Always use a UBEC in all my planes. Lost one model to a low voltage brown out. Great price also. Wires are long enough for all connections, which is always nice.Excellent quality/price ratio and extremely light UBEC
fr den Preis superGreat unit. put out 5.2v as described!!the best and essential ubec ever! top!!!Good quality. Very useful thing when you're using fast and strong servos.
Small size, two voltage selectable via jumpers.Works perfect and it's smal and compactMine was dead on arrival so I never got to find out if it actually worked nicely.
The quality control is apparently non existent, so I would suggest you order a couple to increase the chances for getting that does work.
I love the low weight and small size of the product though.A small price BEC with low noise, I use it on my XJ470 multicopter for the lighting.
No EMC troubles with it.
file di clienti
Dual regulator wiring diagram Scaricare ora [55kb] Actual ubec weight 18.7 grams Scaricare ora [356kb] Turnigy_3A_BEC_Manual Scaricare ora [37kb] General UBEC setup Scaricare ora [105kb] Back foto Scaricare ora [296kb] Opened front foto Scaricare ora [313kb] UBEC powered ON Scaricare ora [3478kb]