Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy 5A 1S Brushless ESC

Generating Links

Turnigy 5A 1S Brushless ESC

Prezzo:

Now save risparmia 0,00 € 0,00 €

10,17 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
T5A-1S
Spedizione gratuita? Clicca qui per saperne di più!
Turnigy 5A-1S ESC un molto piccolo e leggero regolatore di velocità brushless che supporta 1S (3.7-4.2V) cella lipo con built-in 0,5 / 5v uscita BEC. Perfetto per volantini micro-Heli e al coperto.
Caratteristiche:
controllata da microprocessore
Estremamente bassa resistenza
3A continua (picco 5A)
cell Lipo 1S o 3 celle NiMH / NiCAD
Alto tasso di commutazione regolabile (PWM: 8KHz / 12KHz / 16KHz)
BEC: Max 0.5A (switching)
Low Cutoff Voltage: 3.0V
tipi di taglio programmabili (cutoff morbido / duro cutoff)
tipo di freno programmabile (disabilitazione / soft freno / freno duro)
Tempo di avanzamento programmabile (basso / normale / alta)
Programmabile limitazione di corrente (molto ensitive / standard / insensibile / disabilitazione)
Programmabile tipo di avvio (avvio molto morbido / soft start / inizio veloce)
Protezione termica (100 centigradi)
Applica per la maggior parte dei motori brushless Inrunner e cassa rotante.
alimentazione sicura sul programma di armamento assicura motore non si accende accidentalmente.
Spegnimento automatico quando il segnale viene perso o interferenze radio diventa grave per più di 3 secondi .Dopo collegamento radio è stato ristabilito, spostando l'acceleratore nella posizione più bassa in grado di riavviare il motore.
Nota: programmabile con carta Turnigy mostro programmazione.
Spec.
Tensione: 3.0 ~ 4.2V
Cont. Corrente: 3A
Burst corrente: 5A
Batteria: 1 cella Lipo / cellulare 3 Nixx
BEC: 5V / 0.5A
Formato: 25 * 13 * 5mm
Peso: 2g

Vi suggeriamo ai clienti di non programmare il CES con il loro Tx.
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Stephen | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jan 12, 2016

I replaced a brushed motor and Esc for one of theses 1s ESC and a 1-2s brussless motor and now the model flys much better and for longer .
Great result.

Mnogovat | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 04, 2013

.

Sokonomi | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 18, 2012

Just a heads up, these things are not suitable for multicopters. Far too slow to handle it. They are quite nice though.

Knifenslow | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 03, 2011

Great little esc provided you use the sub 2 gram servos so as not to overload the tiny switch mode power supply. I'm running this with an AP03 7500kV motor, 4025 GWS prop, orange Spektrum compatible 4ch receiver and two of the 1.7g linear servos and sub 30g flying weight for vertical performance.

Knifenslow | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 05, 2011

Noticeably more thrust from the AP03 7500 kV motor than I got previously with the XP 3A 1S esc.
It does stutter with the AP03 7500kV motor on startup on the fast start setting and won't start at all on the other two settings unless the prop is given a flip. I haven't experimented yet with the timing mode so see if that helps.
Switch mode esc seems to handle load from orange 2.4 gHz Rx and two 2.5 g sub micro servos without getting hot.

El Tomy | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2011

Great esc, bec runs 2 hs55's with no problem. Get the program card as it is hard to hear the motor beeps. Pulling 2 amps in the vid.



http://www.youtube.com/watch?v=K7wIipaCIp0

Harrow | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 09, 2010

This is a great ESC. The best part is that even if you use single cell Lipo, it still puts out 5 volts to your radio. That's right, it has a switching voltage booster for the receiver supply!!

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 11, 2009

Very small and light.easy to use.

tonioaltea | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Nov 07, 2009

regolatore leggerisimo per micro motori,funzionale ed a baso costo

File dei clienti
photo instructions Download [3603]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!