Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy 600 H37403 Brushless Outrunner 1180kv

Generating Links

Turnigy 600 H37403 Brushless Outrunner 1180kv

Prezzo:

Now save risparmia 0,00 € 0,00 €

38,59 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
TR37403-1180
Spedizione gratuita? Clicca qui per saperne di più!

Turnigy 600 H37403 Brushless Outrunner 1180kv

Un grande motore per 550 ~ 600 elicotteri di classe come il Align T-Rex 550 e HK600

Spec.
Modello: 3740
Attiva: 3
Celle: 11s
Kv: 1180rpm / V
Corrente a vuoto: 3.4A / 10v
Potenza max: 3kw
Peso: 379g
Diametro albero: 6mm
Dimensioni: 44,1 x 65mm
Recomended ESC: 100A HV

  • Kv ( rpm / v ) 1180.00
  • Correnti Max (A) 75.00
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 40.00
  • Potenza ( W ) 3000.00
  • Albero A ( mm ) 6.00
  • Lunghezza B ( mm ) 65.00
  • Diametro C ( mm ) 44.00
  • Can Lunghezza D ( mm ) 45.00
  • Lunghezza totale E ( mm ) 85.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

beenfly'n | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Jul 08, 2013

Nice motor for the price. I'm using it on a KDS Innova 550 with a 15T pinion and 4500mah 6S 50C Lipos. Lots of power and very smooth. I'm using a YEP 100A (the early Helidrive version). Timing is set to auto and 8KHz PWM. The motor is quite hot at the end of a flight, but not too hot. You can touch it, but not for very long. I may try manual timing around 5 degrees. I see the new Scorpion HKIII-4025 1100kv 3T motor calls for 8KHz PWM and 5 degrees timing. So all up I'm very pleased with this motor. p.s. make sure you put a bit of thread lock in the motor shaft set screw hole, on the bottom of the motor, to stop it backing out in flight.

pilotxxxx | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Aug 14, 2012

. , . , 770Kv - 10S, 4.9A 1.8 10S.

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Dec 08, 2011

Useing this motor with a 13 toogh pinion. lots of power!



Pinion gear = (Target RPM) * (Teeth on main gear) / (Motor KV) / (Voltage) / (Motor efficiency)



2000 (rpm) * 170 (teeth) / 1180 (KV) / 22.2(Voltage) / .96 (ME) = 13.5 Pinion

| Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

May 22, 2011

este sera para nuestro elicoptero 450

3dheliwannab2 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 14, 2011

Been hearing about people getting 1 or 2 flights before turnigy motors burning up. Do a check of the wires coming out of the motor. This motor I purchased, found 2 out of the 3 wires were cut on the body of the motor and touching the metal. Luckily it was caught before putting it in.

I was able to get some heat shrink tubing on each wire. The edges of the motor around the openings are sharp. So keep an eye out for this.

Minttumannen | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 03, 2011

Setup:
HK 600GT
CC ICE 100
Micro Beast FBL
17T piniong
2200 headspead
turnigy 5000mah 6s 20c
max watt 3572W at 160amps
engine temp at about 40deg celcius

I realy like this engine, lots of power :)


Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!