Turnigy 9XR modalità PRO Trasmettitore Radio 2 (senza modulo)

• Overall
• Quality
• Value

Radiocommande defectueuse

Feb 02, 2020

Le manche des gaz, ne fonctionne pas. J'ai renvoyé la radiocommande au service après vente

• Overall
• Quality
• Value

Falla el interruptor de encendido.

Mar 30, 2018

Vaya, que poco me ha durado la alegría. El interruptor de encendido empieza a fallar. Hay que darle muchas veces hasta que al final enciende. Ya no me da ninguna seguridad.

• Overall
• Quality
• Value

Good price

Nov 26, 2017

Good cost x benefit, but constructive quality leaves something to be desired.

• Overall
• Quality
• Value

bad quality ! problem with the sticks and impossible to calibrate

Oct 26, 2017

bad quality ! problem with the sticks and impossible to calibrate

• Overall
• Quality
• Value

Great Value

Sep 04, 2017

The throttle stick doesn't have a detent so I soldered a small wire horizontally on the tension spring and adjusted the resistance by changing the mounting screws hight.
I'm using the latest ER Sky 9X test builds with great success. Documentation is a bit scattered so expect a learning curve with lots of research. YouTube is a great resource.
The DIY Multi-Protocol 4-1 TX Module works after some trial and frustration.
Overall, I'm very pleased with this setup.

• Overall
• Quality
• Value

Best semi advanced TX for new pilots

Jul 23, 2017

This is the second 9XR PRO I've ordered now as they are very good for people like me who are still new to drone racing and acro. It's a very robust TX with a pretty good layout and enough switches to setup whatever RC craft you have. You can save up to 60 craft in the main memory plus with the sdcard you can save a massive amount of model setups. I also like the fact you can use a 3s battery with a discharge rating of 25c which I tried while I waited for the 3s TX battery I'd forgotten to buy at the same time.

It runs ARM version of er9x radio firmware which is similar to the OpenTX that comes installed on Taranis transmitters which allows you to go right into your TX and change all sorts of different things from voice files to things like protocols. The module bay is JR which allows the use of many different modules which gives you much more scope for using different recievers. I use a 4in1 Multi Protocol Modulator in my 9XR PRO which has allowed me to use almost every reciever you can think of.

I did modify my first 9XR PRO by painting the raised lines on the 3 POS dials because it was hard to see when they were centered and updating the firmware but apart from that it was great to use straight out of the box. So to sum this TX up, I would highly recommend this transmitter if your looking for something bigger than a basic 6ch TX costing around £50 but not as expensive as a Taranis which is similar to the 9XR PRO.

• Overall
• Quality
• Value

good radio quality/price

Jun 19, 2017

The radio it's ok for the price I paid (54 euros) It work fine but I think some quality and design issues has to be pointed.
Flight mode switch loose after 4 uses.
Battery cover very easy to get loose and fall, you guys be sure on put some extra fix on it. In my bad luck it fell, and happens to be on an unreachable crack in the middle of nowhere. so,now I have no cover. if someone can help in find a replacement it will be appreciated.

• Overall
• Quality
• Value

Muy recomendable.

May 27, 2017

Calidad precio inmejorable. Me ha sorprendido gratamente.

• Overall
• Quality
• Value

One transmitter to rule them all

Feb 12, 2017

For its low sales price with no modulator or battery this transmitter is right up there with the big boys. It comes with erSky9x installed stick it's pretty usable, but if you update the firmware which itself takes no time is very simple. The new firmware also increases the model memory to 60 from the 20 or so stock model memory which is great if like me you have an ever growing fleet of drones. I also purchased my modulator from banggood it's the 4in1 multi protocol modulator (http://m.banggood.com/2_4G-CC2500-A7105-Flysky-Frsky-Devo-DSM2-Multiprotocol-TX-Module-With-Antenna-p-1048377.html) and after a little soldering and a tiny firmware update I plugged it into the back of the 9XR PRO and turned it on, after a little search I found the info required for my eachine e010 and started flying it with this transmitter. The combination of this transmitter and that 4in1 multi protocol modulator turn it into a transmitter capable of running every rc protocol out there, which means all your indoor and toy drones can all be operated from this one transmitter, or to put it in plain English, you can control over 500+ models. Why pay silly money for a transmitter made by one of the big boys when you can get everything they offer when this transmitter and some little mods and tweaks your 9XR PRO will do the same and more. So if your looking for a new transmitter you can rest assure that this could be all the transmitter you'll ever need.

• Overall
• Quality
• Value

Nice buy

Jan 06, 2017

Using with the FrSky XJT and X4R, all works well. Haven't had to explore too many of the features as yet. Sticks all feel quite solid and nice.