Un caricatore avanzato e potente, il Turnigy A6-10 è in grado di caricare, equilibrare e scaricare Leone, LiPo, di vita (A123), batterie al NiCd e NiMH su una potenza di uscita massima di 200W. Si può caricare o scaricare fino a 18 cellule di NiCd / NiMH e 6 serie di batterie al litio con corrente massima di 10A. Si può accettare tre tipi di batterie al litio (Lilo / Lipo / Life).
controllata da microprocessore
Delta-picco di sensibilità
Individual bilanciamento delle celle
Li-ion, LiPo e vita capaci
Ni-Cd e NiMH capaci
Ampia gamma di correnti di carica
la funzione Store, permette alla corrente l'immagazzinamento sicuro
funzione di limite di tempo
monitoraggio della tensione di ingresso. (Protegge le batterie di automobile al campo)
L'archiviazione dei dati (Memorizza fino a 5 confezioni in memoria)
Rodaggio della batteria e il ciclismo.
Tensione di ingresso: 10 ~ 18V
CIRCUITO DI POTENZA: Max Charge: 200W / Max scarico: 25W
Carica Range:. 1 ~ 10.0A
Scarico gamma attuale: .1 ~ 5.0A
Celle Ni-MH / NiCd: 1 ~ 18
Li-ion / cellule Poly: 1 ~ 6
Pb tensione della batteria: 2 ~ 24v
Dimensioni: 143x124x37mmCompatibile con tutti i pacchetti di Zippy, Rhino e Turnigy.
lies in the product description. USB connector on the charger is not available.
The charger does not start from the power supply 12v 5a
I was able to run only on battery car battery. At the moment when a large current consumption occurs 5-6a. Can not be applied low-power power supplies.Bought two Turnigy A6-10- 200W, Congratulations HK, two chargers from different batch numbers (one with a blue screen with white digits and the other with black digits) and both need no calibration. Accurate charging, accurate balance charge, discharge for storage no problem. Its a real workhorse, fan is a little noisy but the thermal picture very good. Conclusion unbelievable value for your money.Lots of features, but unable to balance my lipos with less then 0.2 volts difference. Some times my 2S lipos end up 4.34 - 4.06.
You can possibly destroy your lipos by overcharge in the charger or by over-discharge in use because of the realy bad balance.
Avoid this one!Excellent charger, even though mine doesn't have the USB port/outlet, who cares!!! For the price, quality is excellent, the charger also comes with the leads to charge NiCd/NiMh Rx battery packs for the nitro fliers/drivers. Mine was already calibrated for LiPo batteries so it was ready to use. Also has a 'storage' setting for LiPo batteries. If I could give it more stars, I would, keep it up Turnigy!!!One of the decision i made, use it for parallel charging my LIPOs - Balance perfect (checked with multimeter)Easy to use, connectors all good quality. Ive had mine over a year now without heavy use but has had some and always working. Annoying alarm lol it can be turned off. Great value.Lasted 3 charges and then resistor R117 fried, now the storage and discharge function have stopped working
Superior quality. Easy handling. Recommend.Its well built, and comes with cables, its powerful enough for me.
But the balance gives me 4.2V in first cell and 4.3V in second cell. even tough it shows 4.2V for both. 0.01V to 0.03 volts would be acceptable. 0.1V is to much error for lipo battery.
Using it like this may make damage my lipos earlier or even set them on fire, overcharging it.
To bad a mistake on the firmware, the hardware looks good. If its possible to calibrate all the voltage for all leads, it would be great!
Another bad point is that the manual has USB on it and the actual charger does not.
Dont recommend look for something else.Hallo,
leider ist die Funktion des Balancers nicht zu gebrauchen.
because of the dis-function of the balancing devices the loader can't be used