Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy Accucel-6 50W 6A Bal / Chrg (USA Magazzino)

Generating Links

Turnigy Accucel-6 50W 6A Bal / Chrg (USA Magazzino)

Prezzo:

Now save risparmia 0,00 € 0,00 €

38,64 €
Spedito da:
  • USA
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
U-ACC6
Spedizione gratuita? Clicca qui per saperne di più!

Il Turnigy Accucel 6 è un entry level bilanciamento caricatore e scaricatore che può gestire fino a 6 celle e 5A.
Il Accucel-6 si occuperà LiPo / LiFe fino a 6S e NiMH / NiCd fino a 15S e mostra la tensione singola cella durante la carica con aggiornamenti in tempo reale in tutto il ciclo di carica.
In bundle con la Accucel-6 è un mucchio di fili di ingresso e di uscita, che dovrebbe soddisfare ogni esigenza di carico.

ATTENZIONE.
Ci sono diversi caricatori ora che entrano nel mercato cinese che sembrano simili al Accucel. Questi caricatori sono prodotte con meno costosi FET 'di e, purtroppo, molto meno preciso e molto pericoloso. Ci sono state segnalazioni di caricabatterie copiati ricarica confezioni e non corretto bilanciamento.
I nostri caricatori hanno la certificazione CE e RoHS, dimostrando c'è sicurezza. Inoltre, migliaia di clienti in tutto il mondo hanno utilizzato i nostri caricabatterie con ottimo successo.
Le batterie sono costosi. Noi comprendiamo questo e questo è il motivo per cui noi non portare i dispositivi di carica di bassa qualità.


Caratteristiche;

controllata da microprocessore
sensibilità del Delta-picco (NiMH / NiCd)
Individual bilanciamento delle celle
Li-ion, LiPo e vita capaci
Ni-Cd e NiMH capaci
Ampia gamma di correnti di carica
la funzione Store, permette alla corrente l'immagazzinamento sicuro
funzione di limite di tempo
monitoraggio della tensione di ingresso. (Protegge le batterie di automobile al campo)
L'archiviazione dei dati (Memorizza fino a 5 confezioni in memoria)
Rodaggio della batteria e il ciclismo.

Spec.
Tensione in ingresso: 11 ~ 17V
CIRCUITO DI POTENZA: Max carica: 50W / Max di scarica: 5W
Carica Range: 0,1 ~ 6.0A
celle Ni-MH / NiCd: 1 ~ 15
Li-ion / cellule Poly: 1 ~ 6
Pb tensione della batteria: 2 ~ 20V
Peso: 355g

Questo caricabatterie è dotato di una spina di carica JST-XH, che lo rende compatibile con Zippy, HXT, TURNIGY e le confezioni con un adattatore JST.
* Questa unità ha le stesse funzioni (ad eccezione di PC-USB) e le caratteristiche come la B6 IMAX, se non che si tratta di una ventola di raffreddamento interna.

Nota: Alimentatore non incluso.
Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Aug 13, 2010

a very good charger. very solid. but i have a question due to lack of manual info. i left my tx on and the lipo is almost totally discharged. when i start the charging it says "low voltage" and no cell number info. any ideas on how to fix this? thank you.

inertia8 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jul 17, 2010

I'm happy with this unit, had it for 2 months and balancing appears to work just fine for my little 2sp's, the accuracy of mine was ok out of the box, when hooked up to my MM it reads the same charging voltage as the Turnigy (so long as I'm not charging at high amps, then it lags behind, but matches as soon as the charger goes to 0amps to check battery voltage).. for the price I'm not complaining, hope it lasts!

Baine31 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Jun 16, 2010

Great Charger!! Got mine today and charged/discharged everything from Nimh-Pb-Lipo! Balancer is accurate to .01v when compared with multimeter readings. What you see in the pic is ALL you get, no glow driver/receiver adapter, no TP tap adapter. Gets a little warm, 110-120F at 5/6amps. Fan is quiet (right now) n no issues to report. All in all, a SPECTACULAR little charger n worth EVERY penny. Buying two more!!!!

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 23, 2010

When I got my charger it did not work out of the box. I heard a rattling noise like a rock was inside of it. Opened the case and the resistor coil was loose inside the case. Fired up my soldering iron and re-soldered it to the board then it worked fine. After about a year though, my buttons have started shorting out. This could be an excellent charger if they would just have more pride in its construction.

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 21, 2010

does any one know what Vol select err means when it comes on the screen??

Bryan | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 18, 2010

I bought two of these chargers and both worked very well. Wish they came with a power supply though...

Marek Szulen | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 07, 2010

It's really great charger for low money. We're using it as a backup one for our main charger, but it's much simpler in use. Highly recommended item!

mikeymckeen | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

May 06, 2010

Great charger highly recomended, every bit as good as a hyperion.... I must say I was not expecting it to last as long but it has! ive had it for 1 year and used it at a minimum 3 charges a week, voltage and amp's still hold within .12v and the balancer is still within .02v , I have not had any issues with button, fan or screen failure. I now do more electric than nitro so I will buy 2 more when stock arrives.

dvictoria | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 13, 2010

I know that this charger has increased my flying time. It takes 45 minutes to charge my Nicads, and Nmhi batteries at the field instead of 14 hours. I feel safer as I can check the voltage and even cycle the batteries. I was going to throw away several batteries but they work fine after cycling them. I just know it works and I am trusting them as I have 3 to 500 dollars flying around. Have not crashed due to battery failure. Thanks

Cliente | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 07, 2010

I really like this charger. It is small and light yet well built. Comes with most every type of connection needed to charge your batteries from deans to a glow starter.

Be sure to order a power supply with this charger if you intend to use 110V. Otherwise the provided plug with alligator clips works perfectly.

Charged/balanced my 4000mah lipo in around 30 min. Fast charged a 3300 nimh battery @ 5A in about 20 min. Input V only varied by 250mV.

Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!