Diventa fornitore Blog Nuovi oggetti
Registrati

Prezzo totale

0,00 €

Carrello della spesa 0 Carrello della spesa 0 Loading...

Turnigy Aerodrive SK3 - 2118-2750 Brushless Outrunner Motor

Generating Links

Turnigy Aerodrive SK3 - 2118-2750 Brushless Outrunner Motor

Prezzo:

Now save risparmia 0,00 € 0,00 €

14,92 €
Già acquistato Discontinued Product

Please continue searching for a similar product.
SKU:
SK3-2118-2750
Spedizione gratuita? Clicca qui per saperne di più!

Turnigy SK3 motori sono il prossimo salto di qualità del motore e del design. Abbiamo incaricato i tecnici di procurarsi i migliori qualità magneti, cuscinetti e materiali a loro disposizione e sviluppare un motore che non solo rivale, ma superare oggi la qualità di molti motori principali produttori sul mercato.

Il risultato è un efficiente, ad alta motore calibro usando qualità doppi cuscinetti schermati, magneti al neodimio sinterizzato e uno statore stringa ferita garantire un accurato e costante avvolgimento ogni volta.

I motori Turnigy SK3 sono adatti per modellisti che sono alla ricerca di un motore brushless qualità senza compromessi.

Specifiche.
Attiva: 9T
Tensione: 2 ~ 3S Lipoly
RPM / V: 2750 kv
Resistenza interna: 0,22 Ohm
Max carico: 5A
Potenza massima: 39W
Shaft Dia: 2.0mm
Peso: 17g
Motore spina: connettore 2 millimetri proiettile

  • Kv ( rpm / v ) 2750.00
  • Correnti Max (A) 5.00
  • Resistenza ( mh ) 220.00
  • Max Tensione (V ) 11.00
  • Potenza ( W ) 39.00
  • Albero A ( mm ) 2.00
  • Lunghezza B ( mm ) 21.00
  • Diametro C ( mm ) 21.00
  • Can Lunghezza D ( mm ) 18.00
  • Lunghezza totale E ( mm ) 25.00
attributeset-10
Close

Dimension Diagram Guide

  • attributeset-10

Close

Carica video

Registrati per caricare video, per favore accedi o registrati

Temi
Ordina per
Argomenti più recenti
* Nickname:

* La tua risposta:


Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Annulla
Invia
Pubblica un nuovo argomento
* Nickname:

* Il tuo argomento:



Si prega di inserire il testo mostrato nell'immagine nel campo sottostante
*Codice di verifica:
Pubblica argomento

Registrati per scrivere recensioni, per favore accedi o registrati

Daniel | Acquirente verificato

  • Overall
  • Quality
  • Value

Perfect

Jul 30, 2017

High quality motor with high power with 3s and 5x4 prop. Little bit problem with O rings because is impossible to assembly them - is not space beetween motor and heads of screws. If you assembly them than is O ring little bit damaged by head of screw and after swith on the power of motor propeller left motor because O ring will tear. I used rubber to ladies hair and all working perfect.

insaneRC | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Dec 29, 2014

I have one of these on a racing plane of mine, I run it on 4s with a 4.7x4 prop. It puts out about 280-300grams thrust, and the plane pushes 120mph. When I land, the motor is just barely warm. Over all this motor is good deal, I think you will not be disappointed. You can also run a 5x5 on 3s, or a 6x4 on 2s.

rappa | Acquirente verificato

  • Overall
  • Quality
  • Value

Certified Buyer Rated

Mar 06, 2014

godd motor!! hobbyking !!!

bstarkey54 | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 10, 2014

About 10 people in my club use these motors and they are great!!! We use a 460 to 760 3 cell with no more than a 5 X 4.3 prop. We have put these on our Bonsai's and they just scream. Vertical until out of sight. They put out considerably more watts that that listed. We use the 15 - 18 A ESC's. Prettiest motor around and they scream. Lots of fun.

Yuto Kang | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Apr 01, 2012

I mounted on of these on a 17" F-22 Raptor that I built from foam board. Using a 4045 prop, this F-22 screams on a 3 cell Lipo.
The Raptor with battery is just under 220 gr. and this little motor takes it our of site almost faster than you can cut back on the throttle. Very pleased with the motor and will definitely be order more for other foamies.
While a lot of the other motors seem to have problems with wires breaking or bearing, this motor is built as advertised. It's made really well and out-performs the other little motors of similar size. You won't be disappointed.

SomeUselessGeek | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Feb 11, 2012

39 watts?!? They have GOT to be kidding. Last night I ran one of these motors on a HK EPO Park Jet for four minutes at OVER 100 WATTS. Way more power than I can get out of any other motor this size. At the end of a five minute session (mostly WOT) the motor was barely warm to the touch. Hopefully somebody with some instruments can measure the actual efficiency of this motor and put some numbers down here.

This is my new favorite line of motors.

iacei | Acquirente verificato

  • Overall
  • Quality
  • Value

Customer Rated

Oct 27, 2011

Very nice powerfull motor on 3S with a 5x4 it rips the lamas ass!

Very good for my fox, even a bit overpowered.

Watch for the Amps though I would suggest a 12A ESC minimum.

File dei clienti
MotorData(SK3_sv_1811).pdf Download [365]
Drawing Download [87]
Caricare un file

Registrati per caricare i file.
Per favore accedi o registrati per iniziare subito ad aiutare gli hobbisti!