New Items Forum
Registrati

Prezzo totale

0,00 €

Carrello 0 Carrello 0 Loading...

Turnigy Aerodrive SK3 2822-1275 Brushless Outrunner con albero corto

Turnigy Aerodrive SK3 2822-1275 Brushless Outrunner con albero corto

Shipped From:
  • USA
  • Global
QTY:

Now save risparmia 0,00 € 0,00 €

11,56 €
Stato:
Disponibile
SKU:
9192000076
WANT FREE SHIPPING? Click here to find out more!

Turnigy SK3 motori sono il prossimo salto di qualità del motore e del design. Abbiamo incaricato i tecnici di procurarsi i migliori qualità magneti, cuscinetti e materiali a loro disposizione e sviluppare un motore che non solo rivale, ma superare oggi la qualità di molti motori principali produttori sul mercato.

Il risultato è un efficiente, ad alta motore calibro usando qualità doppi cuscinetti schermati, magneti al neodimio sinterizzato e uno statore stringa ferita garantire un accurato e costante avvolgimento ogni volta.

I motori Turnigy SK3 sono adatti per modellisti che sono alla ricerca di un motore brushless qualità senza compromessi.

Nota: Questa versione ha un albero di lunghezza filo - ideale per i piccoli progetti Quadracopter! Facile da montare in cornici Quad. Si prega di fare riferimento alle immagini.

Specifiche.
Attiva: 40T
Tensione: 2 ~ 3S Lipoly
RPM / V: 1275 kv
Resistenza interna: 0,185 Ohm
Max carico: 8A
Potenza massima: 95W
Shaft Dia: 3,0 millimetri
Peso: 31g
Motore spina: 3,5 millimetri Connettore pallottola

Include: adattatore Prop

  • SKU 9192000076
  • Brand SK3
  • Peso 59.0000
  • Lunghezza 110.00
  • Packaging Width 45.00
  • Altezza 85.00
  • Kv ( rpm / v ) 1275.00
  • Correnti Max (A) 8.00
  • Resistenza ( mh ) 0.00
  • Max Tensione (V ) 13.00
  • Potenza ( W ) 95.00
  • Albero A ( mm ) 3.00
  • Lunghezza B ( mm ) 20.00
  • Diametro C ( mm ) 28.00
  • Can Lunghezza D ( mm ) 7.00
  • Lunghezza totale E ( mm ) 22.00
Upload video

Only registered users can upload video. Please, log in or register

Only registered users can write reviews. Please, sign in or sign up

Nice engine, my standard engine for light twin ESA/EPA planes. I use two one with a 7x5APC and a 3S 2200mAh Zippy compact for 7 minutes at full throttle

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice engine, my standard engine for light twin ESA/EPA planes. I use two one with a 7x5APC and a 3S 2200mAh Zippy compact for 7 minutes at full throttle

i use it with 8045 props and works very well, quite and powerfull

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

i use it with 8045 props and works very well, quite and powerfull

super powerful on the scorpion Y6 frame, even using the flimsy glow in the dark props

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

super powerful on the scorpion Y6 frame, even using the flimsy glow in the dark props

These are very good motors. They run smooth and efficient with 8045 SF props on my SK450 quadcopter. I like how 3mm bullet plugs come pre-soldered! The best thing about these motors is that they only draw a max of 8 Amps! You only need 10A ESCs, but I use 15A multistar ESCs for extra safety (and they come with 3mm bullets). All in all a very good motor!

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

These are very good motors. They run smooth and efficient with 8045 SF props on my SK450 quadcopter. I like how 3mm bullet plugs come pre-soldered! The best thing about these motors is that they only draw a max of 8 Amps! You only need 10A ESCs, but I use 15A multistar ESCs for extra safety (and they come with 3mm bullets). All in all a very good motor!

Beginners mistake. Ran these with a 30A turnigy plush speed controller, so they got mighty hot. Will order some 10A which look more suitable according to pls comments. Using a kk2.0 board, which needed firmware upgrade before the motors ran in all at once. Smooth motor. Good power on my dead cat - although not sure how it will run with 10A speed controllers. One downside, the 3 small screws (M1.5 hex)!for the prop mount are weak. Snapped some from over tightening, then I learnt my lesson, but the some snapped after one crash, and another whilst in flight. Recommend you replace these with strong bolts. Bullet connectors are 3.5mm, but I had to first give them a squeeze with needle tip pliers to get them to fit the gold connectors I purchased.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Beginners mistake. Ran these with a 30A turnigy plush speed controller, so they got mighty hot. Will order some 10A which look more suitable according to pls comments. Using a kk2.0 board, which needed firmware upgrade before the motors ran in all at once. Smooth motor. Good power on my dead cat - although not sure how it will run with 10A speed controllers. One downside, the 3 small screws (M1.5 hex)!for the prop mount are weak. Snapped some from over tightening, then I learnt my lesson, but the some snapped after one crash, and another whilst in flight. Recommend you replace these with strong bolts. Bullet connectors are 3.5mm, but I had to first give them a squeeze with needle tip pliers to get them to fit the gold connectors I purchased.

My favourite motors for F330 frames. Real smooth and with 3S 25Cplus LiPOs they have nice punch with 8045 props.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

My favourite motors for F330 frames. Real smooth and with 3S 25Cplus LiPOs they have nice punch with 8045 props.

Good motor. I bough 5 for a quad, one is kind stuck, so I left it for a later replace if needed. It has good performance with 8x4.5 and I got over 12 mins flight with a 800g quad (33cm frame). Although all the motors seems slightly 'lose' on the bearings since I can move it side ways.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Good motor. I bough 5 for a quad, one is kind stuck, so I left it for a later replace if needed. It has good performance with 8x4.5 and I got over 12 mins flight with a 800g quad (33cm frame). Although all the motors seems slightly 'lose' on the bearings since I can move it side ways.

Using these with the hobbyking blue 12a esc, f330 frame and kk2 with a 3s lipo. Nothing to complain about. Bought 5, one as a spare, had a few good crashes and these are still going like new. Only negative is these should come with lock nuts as I had a prop fly off, lucky it hadn't lifted of the ground yet.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Using these with the hobbyking blue 12a esc, f330 frame and kk2 with a 3s lipo. Nothing to complain about. Bought 5, one as a spare, had a few good crashes and these are still going like new. Only negative is these should come with lock nuts as I had a prop fly off, lucky it hadn't lifted of the ground yet.

Nice motor design, but 1 out of 5 was bad, only 2 were real smooth.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

Nice motor design, but 1 out of 5 was bad, only 2 were real smooth.

recently put these on my quad. Nice fit and finish, well balanced and quiet with good bearings. not the most powerful motors out, but forgiving to learn on.

verified_user Quality:
trending_up Value:
playlist_add_check Overall:

recently put these on my quad. Nice fit and finish, well balanced and quiet with good bearings. not the most powerful motors out, but forgiving to learn on.

  1. 1
  2. 2
Customer files
Prop Mounted Download [781]
Prop Adapter Download [3110]
Upload your file

Only registered users can upload files.
Please log in or register to start helping your fellow hobbyists today!

Combine Essential Items and Save